DISCLAIMERS* This video is for entertainment purposes only. It is NOT an instructional video.
This video and/or description contains affiliate links, which means that if you click on one of the product links, we may receive a small commission at no extra cost to you. As an Amazon Associate, I earn from qualifying purchases.
all right so I need to get the uh
countertop uh completed for uh the
kitchenet area inside my offgrid cabin
now one of the things that I really need
in order to do that is a a good set of
calls so uh what I want to work on
today is I want
to create some calls out of some
Unistrut that I've got here here this
stuff is um it's very strong very
straight and really it's
readymade to be uh turned into a set of
calls so that's what I want to get done
tonight so let's get to it all right
so what you're going to need for this
you're going to need a couple of lengths
of your unist strut but then you're
going to need some bolts and you want to
use this type of a carriage bolt here
because you look at this it fits
perfectly inside these slots so when you
put it in it doesn't
turn so it makes it you know really easy
to tighten this down you know and you
get another bolt that is too big to slip
through that or you can put a uh a
washer on as well but uh that's the idea
is to cut this up into a a couple of
lengths so any I'm going to mark this
off I'm going to get these cut and then
we'll we'll go from there all right so I
need to figure out uh what lengths that
I want so these are 10t
long so I could go 30 in and create four
of these or I can go 42 42 and
36 all right well 30 in would uh that
would give me the most call but uh then
I would be limited
to uh 29
in or 28 in actually because you've got
to have room to put your bolts in so 28
in that's
that's that's uh wide enough for my
countertop but if I wanted anything
larger than that then I couldn't use any
of these
calls uh for
that so I think I think what I'm going
to do is I'm going to go 42 42 and
36 so that's three sets of calls but it
gives me uh a wider range of panel sizes
that I can use these for
[Music]
these aren't going to be
perfect so I'm just going to have to cut
them where where they where they land
and I need it to land in the center here
you know between the slots center of a
slot so it's not going to be exactly 42
in this one is exactly 42 in this one is
not going to be if you come look at this
I don't know if you can really tell but
look how look how wide that is compared
to that and that I mean they're just off
this one
slipped so it's not as accurate is this
one
and yeah oh well that's what I'm going
to have to go with
[Applause]
[Music]
[Music]
[Music]
[Applause]
[Music]
a
[Music]
[Applause]
[Applause]
[Music]
[Music]
all right I've got my first set
[Music]
here those are 42
in and this one is 36 in so when I cut
the second uh Unistrut I'll have four of
these or or two calls and I'll have two
of these or one
call all right so if you look at this
first one this one is 42
in this second one is 41 1/2
in this one well this is 36 in but this
one is looks like it's 37 in and you can
see how that these two slots line up
here but by the time you get back here
they're way off so I think I can use
those two
here but uh I'm not going to be able to
use this I might as well just cut that
off right there so that these are at
least the same
length but uh there we have it I've got
three sets of calls there that I can use
to keep my boards you know nice and
straight when I'm doing my glue up I
wasn't sure if I was going to be able to
make all those cuts on one disc and the
one battery even but I was able to do it
so yeah
Kudos all right so I've got my
panel all uh set up and uh ready to glue
so I've got uh
these and uh they're holding it straight
on the ends and then I've got two in the
center here and I've got those uh
clamped to my bench and that'll help
flatten it out and then I've got uh
these two parallel clamps that I'm using
to uh squeeze them in and uh I've got uh
Dow rods in these just like I did on the
uh shelf so we'll let that uh dry
overnight and then uh we'll get this
thing going but uh that's probably all
I'm going to do for this video just
wanted you guys to see me using these so
you can see them in action and uh I'll
talk to you later