I Found a 2 Stroke Harley Minibike! Will It Run!

Two-Wheeler Technology
5 followers
2 Video Views·Sep 12, 2025
I Found a 2 Stroke Harley Minibike! Will It Run!
In the late 1960s and early 1970s motorcycling was crazy. There was a huge boom going on and
the manufacturers were starting to get really creative and figuring out what the markets
wanted. That's also right about the time our beloved American Harley Davidson was struggling,
but was saved by the AMF bowling pin company. Go figure. They teamed up with an Italian company
and right here I have a great example of what I'm talking about.
Look at that. This is a 1974, I think. I'll confirm that. Harley Davidson,
AMF, Harley Davidson. They called these the shortsters. It's a 90cc two-stroke minibike
and they are awesome. What am I kidding? All motorcycles are awesome. Well, let's get this
out of the shed. We're going to get it into the truck and then onto the table and we're
going to see if we can get it running. Oh yeah, that one doesn't roll. There we go.
Oh look, now it's rolling. Oh wait, now it stopped. We're going to have to address that,
Dan. Look at that. It even stands on its own, Dan. Look, mom, no hands.
Front wheel, it seems to be a bit locked up.
All right, on it goes. Lift your back on.
Okay, here we have it on the table. This is the Harley Davidson X90. Tiny little trail bike. It's
a two-stroke, which I love. Let's check it out here from stem to stern or stern to stem. Which
way do you want to do it, Dan? Start up here. Look at that front little fender. I bet you,
here look, we got three screws across the top. I bet you there was probably like a little rubber
flap. 10-inch tires, drum brake, aluminum wheels. That could maybe be an original tire.
Fork seals are leaking or have leaked. There's probably no fluid left in those. We do have some
pitting too on the fork tubes, but that's just kind of what it is right now. Headlight is intact
and this, I believe, is going to be a six-volt headlight because I think this is all a six-volt
system, memory serves. Odometer, speedometer. What is that? 2414 miles with a speedometer that
goes up to 80. Oh, it's melded. Oh no, the speedometer's melded. It got worse when I
cleaned it off. These folding handlebars were a thing and that is pretty neat. They're like,
it's like a quick fold, almost like, you know, like bicycle wheels. Yeah, do that thing. It
loosens up and then you can flip the bars down and throw it in the trunk of your Volkswagen.
Clutch. Clutch moves. Pipe is in great shape. Has the heat guard on, a little tweaked right there.
Should be a four-speed transmission. Seat's not looking swell. Metal tank. They made these bikes
from 1973 to 1975. I would like to get a year on this bike. I didn't see any numbers up on the
headstock. However, I did find an engine number down here. So we're going to investigate that
engine number as the video goes on. And I have a minute and we're going to see if we can dial
in the year. I'm thinking actually, so they made three colors. They made black, blue, I think they
called sparkling blue and sparkling red. If I have my history correct, in 1973, they only had the
black and the blue. In 74, they added the red. So in 74 and possibly 75, I think they had all three
colors. So that would lead me to believe this could be anywhere between a 73 and a 75. So we'll
see if we can figure some of that out as we go. 10-inch rubber on the rear again. Rear drum brake.
Rear aluminum hub. These were street legal. Oh, that's a little wonky. I'm gonna have to tighten
that up. I guess it's a Harley. They're meant to vibrate apart. Tank doesn't look bad. We got a
couple little dings, but you know what? The thing's 50 years old. Well, while we're here, Dan, let's
look inside and see what we got. I don't know if you heard that, but it was pretty satisfying. It was.
I heard it. It's not bad. Oh, that's not bad. That could be way worse. Yeah, it could be way worse.
Well, good news is the tank isn't awful. I like that. That's a fantastic start. I believe this is
this is really a complete bite. I found there is a rubber flap here with two screws. So I'm guessing
there should have been one in the front too. That's pretty cool. Little extended fenders there.
10 inch rear rubber. It is chain drive, of course. I don't think that's supposed to be in there.
That doesn't look genuine. Over here, we got a bolt welded to the swing arm. I'm not sure what
happened there, but that's a thing. And I did say that these things were street legal. So there's
actually a brake switch, rear brake switch right here. There's no rear brake, but the brake switch
is there. That's kind of neat. Oil injected. So here we have an oil tank. Down here is going to
be our oil pump. Our throttle cable splits. One's going to go to the slide in the carburetor, which
is a delorto. There you go. It's that. And then the other cable comes down, and that's what
actuates the oil pump. So we got a reservoir, comes down this hose, into here,
goes through the pump, and it squirts it out of banjo fitting right here. Well, we can see it
better on the other side, but it's right there on the intake manifold. Let's see what's inside this
oil tank. We have a viewing glass. There's a little bit of oil in, and it looks like there's some oil
in the lines. Now, when we get this thing to fire up, pretty clean in there. Good sign. We're still
going to run some pre-mix until we know absolutely for sure that that oil pump is working and
everything's adjusted correctly and driving the way it should. We got a horn. That's pretty cool.
What's our next step? Let's see if this thing turns over. We didn't do that yet, did we, Dan?
Probably not. Okay, well, that's not a good first start. Okay, well, moment of truth.
Nice! Boy, my job just... and it feels like it has some compression. Man, that is a fantastic step one.
Now, you may be wondering why I never do that before I actually pick up the bike and take it
home with me. It's because, quite frankly, I don't care. Now, would I recommend that if you're getting
into some of this and playing around and wanting to learn and all that stuff, is that the way you
should attack it? No. I would probably make sure that it turns over and it's not stuck, but I like
a challenge. There we go. I'm kind of spraying some things here as we go. That's not true. I just
started, but I'm going to start now spraying some things here as we go. Anything I think I may have
to mess with. I may have to mess with this stuff because the front wheel doesn't turn. What do we
got over here? Spray this stuff too, I guess, right away. Yeah, that's good for now. Okay, so it turns
over and it feels like we have compression. What would be our next steps here is we want to see if
we have spark. Oh, what do you think? Does the petcock... oh, look at that. The petcock even turns.
Be dipped. Oh, love it. Okay, so here's what we're going to do. Full spark plug, step one. Boy, they put
that tank right at the wrong spot, I tell you. I'll be honest, it doesn't look hateful. I mean,
for what it is, it does not look bad. Let's put a whiff of juice in there. Okay, this is a piston
port. It has a 48 millimeter bore with a 50 inch millimeter stroke. Now, if you do the math on that
and add everything up, carry the six, divide by cake, my math comes up to about 990, 90 and a half
ccs, which is kind of interesting because normally every other bike you see, the cc, the true cc
amount, will actually be lower than what's advertised. You know, like a 50 cc might be a 48,
49 cc, a 250 cc is going to be a 249, you know, things like that. This one's actually a little
higher, which is interesting. Oh, I find it interesting. I also thought maybe what I should
do is start spraying up some of this stuff here at the carburetor because I'm pretty sure we're
going to be getting into that carburetor. So, anything I can do here to make that a little
easier on future me, I'm going to do. Very kind of you, Craig. Yeah. Looking out for future you.
Somebody's got to start. Okay, where were we? We have a fairly decent tank. Do have a little oil
in the oil. We have a ripped up seat. Motor turns over. Carb slide is sliding. That's fantastic.
Chances we have spark. I'm going to say slim to none, but we got to try.
Well, you know, you just can't stop an old Harley. Let me see.
I saw it. Why can't I see it? There we go.
I don't know yet how long this has been sitting. We're going to find out,
but I can't believe that thing has spark. Okay, well, that is super exciting.
There's not even a mouse nest in this thing.
Okay, there's our airbox. That's the nicest airbox we've had in a long time.
Got to really embrace your inner Italian, Craig. I keep trying to make it like Spanish for some
reason. I don't know why. I don't mean either. You're not the slightest bit Spanish, are you?
But I love tacos.
It's not too shabby, if I'm being perfectly honest. Oh, look at that. Squirt some carb
cleaner in its general direction. Call it a day. Oh, what's that? It looks not good. Whatever it
is. That's the old filter. Hopefully we don't have to use it. I'm just going to forget like
it was in there. Okay, that I'm going to leave on for meow. This I'm going to pop off for now.
Just a little taps until you hear it change. Oh, well,
that's pretty grimy. Yeah, it's fine. It's fine, he says.
Okay, see if I can work that float out. Pick up the screw before I kick it across the shop.
Pick up the wrench before I never see it again. Oh yeah, I forgot to tell you. Pick up that screw
before you forget about it. Make sure you're not forgetting anything else. Do you know what
helps me really stay focused and not forget things? Moving all my business communications
to one platform. We got hooked up with Connect Team. After we started using them,
my life got so much simpler. Okay, so that's the choke plunger there.
And there we have basically a bare car body. This is looking pretty good. Let's hose it off quick.
We're going to put it in the box. We'll get the box going.
Some of the big chunks off before we put it in there.
I can take a screwdriver and just rub it around some of that chunky hard stuff,
too. It just breaks it up a little bit. I want to be gentle, genteel. I don't want to go crazy.
Let the buzz box work at it for a bit. Okay, so that'll go in there. That'll go in there.
How do we want to clean this? We're just going to do some of that by hand.
I'm going to let that float around in there a bit, too. Now,
we need some water and some salt. Keep it in here now so it's not buzzing in our faces.
Let's see what happens. Okay, I can't believe we have spark. Is that really true?
I mean, I can confirm I saw it as well. Holy mackerel. All right, well, here. We've got a
couple other things we can do a while. One is replacing this fuel line. Put some oil in it.
New spark plug. Let's cross-reference that spark plug. Can you join that?
Problem with snacking, man. Got a new plug here. This old plug sparks. This
really good spark out of the new one. I'll be honest, I still can't hardly believe that.
What'd you do? What did I do? Did we lose spark? Yeah. It liked the old spark plug, Craig.
What? It liked the old one. How can that be? I couldn't have been any more wrong
with anything I just said. Let's see it, Craig. Come on. Oh, there it is. Yeah, I saw it.
No, you didn't. Yeah, I did. I saw it again. No, you didn't. It's faint, but it's there. No,
it's not. Yes, it is. I don't believe you. I mean, it's weak. Oh, that could be part of it.
What would you do? I don't know. Look at that. Does it look juicy in there? Yeah,
that should be round to go around the spark plug. Oh, jeez. Make that as round as we can.
Okay, well, just like that, we don't have spark. Awesome. All right, dang it.
Oh, well, here, hold on. One of these is going to be an on and off switch.
Uh-oh. Well, it's not that one.
There we go. Now do we have it back? Punch the table? Yes.
It's in our first rodeo, Dan. I'll lube up the rocker switches. Yeah, you got it.
Turn the lights off so we can see what we're doing.
Yeah, I saw that. Yep. Okay, well, it's not that switch. Okay, well,
apparently it's none of the switches, so I don't know how we're going to shut it off yet,
but we'll figure that out. Let's get it running, I guess. All right, lights on.
Go grab the carburetor and we'll finish cleaning that thing.
Now, Delorto, you can still get parts for this carburetor. This is like an SH1, SH2 carb,
I believe. You can still buy parts for it. So we get this bike fired up and I like it.
You just may have to order a new needle and seat and some of that stuff. They just celebrated.
They're like over 90 years old. I think they started in 1933. They were making carburetors
for like Murakusi and Piaggio, some of the other Italian brands. And if I'm not mistaken,
Delorto did the whole manufacturing process from casting to finishing and assembly,
giving them pretty much control of the process, which is cool.
Here we go. SH2 slash 20 is the carburetor number. SH2 slash 20. These old floats are kind of
fragile. You want to be careful. You don't want to squeeze them hard or rub them too hard to
break them. What do we got here? It looks like probably the main jet. Man, that thing is grody
gross. This is where I wish I had a few hours or overnights or whatever to let some of this stuff
chooch in the buzz box. But we don't always have that luxury. Sometimes we just have to
elbow grease our way through it. You want to be careful if you're doing this, you're not using
something that's too hard or too big because this brass is soft and it doesn't take much to
open up that hole further. You know, this is a metered precision hole in these jets.
So you want to be delicate. Oh yeah, there's a bunch of gunk in there. So by right, what you
should do if you're doing a project like this and you only want to do it once, you would just soak
and wash and clean or replace with, if you can get stock. What I'm saying is do this right the
first time so you don't have to do it again. Like we're not doing. Correct. Let's just stay in there.
Well, I got some more stickers. These are from Drew at Drew's Vintage Cycle. He has a bunch of
parts from him on eBay. Actually, I just bought an engine, a bottom end for an MX, the MX360.
And he sent a bunch of extra stickers. So Dan, you know what we've been doing with them stickers?
Tell me what we've been doing with the stickers. We've been throwing them in random orders.
That's right. I put them in orders. That's right. So whenever we get orders and we got a bunch of
stickers like that, we'll start throwing them in with orders. So yeah, stickers are fun. Everybody
likes stickers. Do you know how I know that? Because I'm stickers and everybody likes me.
I mean, I'm everybody and I like stickers. I'm so confused. I figured it out. That's why everybody
likes Craig. He's stickers. You just revealed your secret. So that goes in there like such.
There is a semi-clean carburetor. Now let's do throttle cable. These old clamps are pretty cool.
They're like old sardine cans. So let's see if we can unwrap it. It's getting there and you
don't twist it like an old sardine can. You're probably too young. Your grandpa didn't eat
sardines. You never put sardines on pizza? I can't say I did. Do. Would. No thanks.
So no, seriously, looking at this fuel system and thinking about this for a bit, this is a 1.4 gallon
tank. So the tank holds 1.4 gallons and it took a while. It took some digging to find any sort of
fuel consumption numbers for this bike. So here's my thinking. I found a number and the number was
87 miles to the gallon. This being a 1.4 gallon tank and if you do the math and carry the octopus,
it's just shy of 122 miles per tank. Now this is a 19. Well here, let's see if we can figure that
out. What is my engine number? Keep talking about it. We might as well see if we can figure it out.
H3. Interesting. So that tells me it's a 1973 and H4 would be a 74 and H5 would be a 75. Now
I don't know if this was just really good timing or it was planned. So in 1973, like I said, I don't
know if this was planned. If they got lucky, I say got lucky, but they were really working at getting
in the new markets. Now at 122 gallons per tank and this being a 1973, again they made this 73 to
75. What else was going on in the United States starting in 1973? Started late 1973 and ran through
March of 1974, I believe. Give you guys a second to go to the comments section and leave your
guesses. Anybody my age or older is going to know this. Time's up. It was the oil embargo. The oil
embargo started in October of 73 and it actually ran to March of 74. So having a two-stroke,
little two-stroke, oil-injected, 90 cc, street-legal minibike during that time
was probably pretty good timing. You know, a guy could hop on this, he'd fill his,
you know, it depends how long his commute was. Maybe he only had to fill his tank twice a week,
or not twice a week, twice a month. And again, if you guys know your history and what was going on
there with that embargo, that would have been super handy. And so, hey, I don't know. Maybe
it's just coincidence, maybe it's actually a thing, but I thought that was kind of interesting.
You did too, right Dan? It was really interesting. I started putting the spark plug in while you were
thinking because I didn't want it to get awkward. Click. There we go. We never did open up this
dipstick. Oh, check this out. This is really cool. These fins here on this crank, or on this,
on these case halves, are ribbed. So this is probably just like your head and the cylinder.
So this is going to be for cooling to help keep the crankcase cool and your crank bearings cool
and stuff. I'm guessing. That's pretty rad. Let's see what's on the dipstick. Oh, there's no dipstick.
Here, my guess is this is an oil check hole right here. Apparently, from what I saw, this transmission
holds like a quart of oil, which seems like a lot. They say you can just run two-stroke oil in it,
which kind of makes sense because back then what they were doing, I guess it makes sense because
you buy one oil, you put it in your oil tank, or you could delete this and pre-mix it if you want,
but then you could just put it in your transmission as well. A lot of guys probably
still ran a regular SAE 30 or something in there over the time, over the years. Honestly, it
doesn't really matter. All it's doing is lubricating the clutch and splashing around
some transmission gears, really. So if I get this drained, if I don't like the way it looks,
if I drain it out and refill it, I'm just going to put the cheapest oil in it I can find and it's
going to be fine. Let's see if I can knock this loose without knocking it through the case.
There we go.
No oil. I don't know if there's any sludge up in the, you know, sitting between here and the bottom.
Look at that. We even got some filings on the magnet. You'll see some of that
when you do oil changes. If you don't like seeing that,
take your bike to a shop to get an oil change. Let's stick that back in.
Now we got an aluminum drain plug going into an aluminum crank case and a big old 15-16th
wrench. That means you choke up all the way because if you're out here, you're going to
put too much to it. So you choke up so you can notch. If you see it sort of running out of that
bottom hole, holler. Are you watching? I'm looking. I don't see. Oh yes. That's good, right? It's good.
Okay, we got oil. Throttle's working. This is broken, so I think I'm going to throw a zip tie
there. Just kind of help hold that all in place. Look at the chances the tires would hold air.
Should we try? I mean, why not, right?
Dude, it's like holiday weekend. If we come back in on Tuesday,
they're still holding air. We'll be like, what? Okay, we got to get fuel system figured out yet,
but we have a pretty clean carburetor. Our throttle is working. We do have spark. I put
the spark plug in. Air cleaner is right here. We got that. We need to put, oh, we did put oil in.
Actually, it looked like two-stroke oil that came out of there. Speaking of two-stroke oil,
before I forget, do I have any two-stroke oil to dump in here? Yes.
Like I said, I'm also going to mix a little fuel until I know absolute certain
that this fuel pump is pumping, doing fuel pump stuff.
How common were or are fuel pumps? Or oil pumps. I'm sorry, did I say fuel pump? Oil pumps. Oil
pumps are pretty common here in this day and age. Pretty much all the two-stroke bikes were running
oil injection. You started getting into the pre-mix bikes and stuff a little bit later on,
and mainly strictly for dirt. When you had, even my Treisinger, my Yamaha, what is that? An 84,
six, whatever. Treisinger had oil injection in it. Blasters, Yamaha blasters ran oil injection,
I think, all the way up through. But on dirt bikes, a lot of times you were pre-mixing,
they didn't have oil injection. And now it's come back where the newer bikes, European bikes,
the KTM conglomerate, they're actually running oil injection again. So full circle. We have oil,
it's looking good. We're above our red dot. That's what you want. Let's see about this petcock.
Well, I want to see. Don't blow that on me. I don't know what's in there. If the petcock was
free. That shouldn't be kinked. Okay. Hey, we've got a fuel line, we've got oil, we've got spark,
we've got compression, we've got an engine that turns over. I think now all we need is gas. Dan,
you know what time it is? It's time to clean up the workbench. Yes, and it's also time to thank
Connect Team for being this week's sponsor. Wow. Before Connect Team, keeping track of Greg and
the rest of the team for hours and time off and tasks and all of that stuff was, well,
it was pretty interesting. We had Google Docs, we had Excel spreadsheets, we had homing pigeons,
we had delivery dogs, the mail donkey, sticky notes. But now all of our communication is in
one app and it never changes. When Greg gets to work, he clocks in, he checks off all the tasks
that he got accomplished that night, and then he clocks out, all within the Connect Team app. And
I can check how long he worked, what he got done, and what still needs to be done, all within the
Connect Team app. Tasks can be organized by which project they're a part of, so Greg and I can keep
projects organized and know what's going on. Yes, all within the Connect Team app. Greg can even ask
for time off to give his cat a bath. And I can approve it, all within the Connect Team app. So
give it a try. Greg and I are not tech savvy and it was super easy for us to figure it out. And
Connect Team is free for up to 10 users. If your team is bigger than that, you can do a 14-day free
trial, no credit card needed. After the 14 days, if you're sold like I was, they have super affordable
business plans for larger companies. So if you're a boss trying to hurt a bunch of cats, download the
app and check out Connect Team. It really helps the channel and maybe it'll keep your cats on
task. Now let's finish cleaning off this table and get back to this bike. Yes, it is time to clean off
the workbench. Air cleaner, air cleaner cover. Awesome. It's just coming out the bottom here.
And I turn the fuel flow off. So it seems like our peckhawk isn't working and this is leaky.
So we do need that other piece. I don't know, something tells me that's not genuine either,
but it's what came with it and it's what we got. So we'll try to make it work.
Let's see what happens. Throw a couple glug of glugs in there. Such a cool little bike.
Oh, it's okay. Spins now, just needed some air. Rolls better now. Still sticky spots.
How many kicks, Dan? 12. 12. Okay, I'm gonna go nine. A couple primers.
All right, let's see what happens.
No way.
What was that, five? I'll tell you as soon as it starts because I can guarantee it's going to be nine.
Not quite. Boy, we started out strong.
All right, looks like we both lose. Can I get some of that spray, please? Go ahead.
It sounds better. Did we lose spark? Getting some spark. Plastid. Where are we at, eight?
Sure, sure, that's eight. Oh my gosh. What'd you do? Never put spark plug cap back on.
Well, that would do it, Craig. Yeah, that'll do it.
Maybe we clean off the workbench a little too soon. So, back to the drawing board.
Dan. Craig. I think what's happening is, and what you guys don't know in TV land is,
we just had the long weekend, but we're back now and it's just not getting spark,
I think, in the combustion chamber and the tire run flat. No, everything wrong is happening.
So, we're going to throw it back on the table just like this. I didn't do much over the weekend
work-wise, but I did clean that carburetor a little more better. So, our carburetor is a
little cleaner. Definitely not any dirtier than it was. So, that's a good step. Okay,
so I think what's happening is we are getting a weak spark, kind of intermittent spark.
So, what I'm thinking is when it's under compression, it's not getting a strong enough
spark to beat the compression. So, on the other side here, we got to pull this gear shifter off.
Look at, oh my. I'd say it's been a while since that was cleaned out. Oh, look at the chain.
It's probably just plowing its way through there. That is so, that's just gunk. There it is.
To the trash can, Dan. Cleanest that thing's been in 50 years. Okay, this is what we were after.
Right here. That was either good or bad. Whoa. Was it bad? Nope. Thank goodness. All right. Well,
hey, at least now we can do what we're doing. Yeah, we were getting fuel. We weren't getting
spark. Clean a lot of points, Dan. Clean a lot of points. Every time I try to look at something up
close anymore, I got to chuckle to myself because I can't see it. Run through, give a few decent
passes on that kicker, and let me see what I see. Like that? Yeah. More decent? Yeah. Yeah,
a little more decent. A bunch of them. Like that? Yep. How are we looking? We're not getting spark.
Uh-oh. I thought I saw something. Yeah. Yeah. Barely. No. Yep. Yep. Yep. I think it's doing
better. Yeah, it seems like it's doing a bit better, eh? Not really seeing anything great
happening here, though. We're gonna have to start taking stuff apart, Dan. We were doing so good.
I don't know what's going to recoil. I'm just gonna try to figure out colors we got there,
and is that green? Is that green? I see a green, yeah. Do you want to take the seat off? Not really,
but I might have to. That didn't... That literally showed us nothing. How funny is that? Oh my god.
All right, pop this thing off. Why do we even have other wrenches? All we need are a couple
different size adjustables. I think it's just big wrench trying to get in our pockets. Okay,
there's that beautiful little nugget. Okay, well, let's figure out what we got going here, Dan. How
much more did that reveal? Everything we needed it to. Everything. You know, maybe what we should
do is take a second just to look in the book instead of guessing at which wires are which.
I don't know what would happen if we pull that cover to find out, right? Pulled everything else
off. Okay, so we have continuity to that. We gotta look at a wire diag. Having trouble piecing it
together in my head. Ah! What? I forgot. What'd you forget? This is an Arimachi Harley. Arimachi.
Meaning? Meaning the taillight bulb is the fuse. So, what we need is the 1157 bulbs is what we
need. I might have some back here. Did you find another bulb? Yeah, I got a whole bag. Cleaned
out my bulb supply from home. Nothing I work on at home takes light bulbs. What are the chances
any of that helped? Now, look what we have for Dilma Havas. Hey! Okay, so, yay. Let's put this
thing back together and see if it'll start. Go away, wire diagram. I don't need you anymore. I
just got to remember on these old girls to replace the taillight bulb. We are getting places. Let's
Meow. Meow. Two-stroke kitten. That's the good kind. Okay, throttle cable's working.
Dan, you know what time it is? It's time to clean off the table again.
Okay, fire extinguishers are over there and over there and that's it. That's all I got.
This is exciting. Oh, it rolls so much better. Kind of. How many kicks, Dan? What did I say
last time? Nine. Yeah, I'm gonna go with nine again. I'm going with seven. Okay. Again,
man, this thing's awesome. What happens if I do this? Clutch isn't stuck.
I forgot to pull on the clutch. It's fantastic. There's no brakes. None.
Second, third, fourth. It's got all the gears.
Drag your feet to stop.
That is so cool. That is so awesome. Well, there you have it. We got it dug out of an old shed
and running. This is going to make a great project for someone. Thank you, Connect Team,
for sponsoring this video. We're going to put all the information down in the description below.
Check it out. It really helps the channel. Guys, find yourself an old bike and start wrenching,
learning, and having fun. Have a great weekend. Dan, throw the videos up here.
Check them out. See you. I don't feel like pushing it. I'm going to ride it.
Ride to the chain. Have a good weekend.
