Someone Left Me a Bike I’ve Never Worked On… Will It Run?

Two-Wheeler Technology
5 followers
25 Video Views·Mar 26, 2026
Someone left a surprise 1994 ATK 350 for The Bearded Mechanic. The motorcycle restoration includes carburetor cleaning, oil changes, and addressing a mysterious starter button. This dirt bike project reveals interesting facts about ATK's history and innovative designs.
AI Generated·May contain errors
This is a 1960, okay, I'll be honest,
I don't know what this bike is just yet
because I didn't look at it.
I'm gonna tell you what happened.
I came in this morning like I always do,
my hands full of boxes and parts and all that stuff,
and I come over to my workbench and I set things down.
I turn on my light and I get to work.
Actually, this here's for the WR200.
We got our fancy race tech bits put in it.
Ooh la la, I can't wait.
Anyway, I'm doing my thing.
I'm carrying on over here.
I was going through some parts,
I was cleaning some things up,
and it took a good 45 minutes for me to realize
I never saw this bike before.
I turned around to do something
and like these gold hubs caught my eye
and I'm like, what in the world is that?
And I was like, this is crazy.
It had a note on it.
Hey bearded guy, fix this.
Love dirt bike fairy.
So I purposely did not look at it.
I called for Dan.
Dan!
Dan had no idea where it came from.
Where did this thing come from?
You didn't bring it?
No, so I didn't look at it
until Dan could grab a camera and a microphone
so that we could figure out
what this thing is together as a crew.
Do we know what this, grab a camera.
We're gonna figure out what this thing is as a fam, fam.
We're gonna switch plans.
We're not working on the Ninja today.
We're gonna do a get it running video on this apparently.
Thanks dirt bike fairy.
Let's figure out what this is.
There's a T.
Oh, that's gonna be the giveaway right there.
It is?
Why, what does that mean?
ATK.
It's an ATK.
My guess is like 1980.
What would they be?
1986?
Am I close?
Way off.
1994, 1994 was a delicious year of years.
I was two.
I was 14.
This is a 1994 ATK 350.
This is a really cool bike actually.
I've seen ATKs before at the swap meets
or at some races and things
and you can hear them at the races.
They got a pretty gnarly sound to them
but I never actually got the chance
to be like up close, personal, get hands on,
work on one, try to get it running.
So I'm super stoked about that.
ATK is a really cool company.
They were founded in 1984 in California by Horst Lettner
and Lettner was known as being an innovator
and he brought a lot of firsts
to the off-road motorcycling world.
Firsts.
Brought firsts.
Firsts.
Yeah, so he brought a lot of really cool things
to the off-roading motorcycle world first.
That's what I mean by that.
It's the best way I can say it.
And from the mid-1980s through the mid-1990s,
ATKs were a force to be reckoned with at off-road races.
And believe it or not, you guys may not know this
but ATK USA is still open and operating to this day.
Now they're based out of Utah
and they're supporting their customers
with ATK parts, Rotex parts, and Cannondale motorcycle parts
which if I had to be in a motorcycle parts business
it would want to be on Cannondales
because I think those things always need fixed.
They never work from the very beginning.
Tell us how you really feel, Craig.
Yeah, I can't say too much
because one day I may find myself working on a Cannondale
and I'll be like, oh, it's the best bike ever.
It's not.
Anyway, I'm super excited.
We got a lot of work to do.
Let's get to it.
All right, well, let's start up here at the front
and see what we have.
We'll work our way to the back.
A Cherbys plastic.
I think I'm correct when I say this
that these came with a Cherbys plastics on them.
Cherbys made the kits for these bikes
when they were in production.
We got WP suspension.
Gold hubs, those are good looking.
Some of the brakes hanging up a little bit.
Plastic, that could clean up.
Heat gun, that might get twisted.
That's a little brittle.
Our front brake is non-existent.
You're not supposed to do that.
I'm not supposed to do that, no.
Throttle?
It's crunchy, but the slide, listen, the slide's moving.
So I thought maybe my ex-best dirt bike riding friend
dropped this off.
Who's your ex-best riding dirt bike friend?
You know, high five guy.
You're not friends?
Well, I noticed there's not a kicker on the right
and the kicker's on the left.
A good friend would never drop off a getter riding bike
with the kicker on the left,
especially after knowing what kind of trouble I've had
with these motors in the past.
Clutch works.
Clutch feels good, but I take it back
because look what I just found.
Zoom in here, Dan.
What?
It is electric start.
Who the funk it?
I don't get to watch you kick?
No, no.
Okay, so let's continue going through here.
These are like a DR, DRZ, and some other bikes do it too,
but the oil is in the frame.
So it looks like we have our oil fill up here
right behind the headstock and our dipstick.
Seats actually, there's a little couple nicks in it,
but it's not bad.
Headlights intact, taillights intact.
Got the exhaust.
Those gold hubs are just delicious, right?
Looks like our kickstand's a little short.
Twin piston Nissen brakes, front and rear.
And now these things also,
one of the cool things or different things with these
is they ran a single shock,
but they didn't run it in the center
like what you're used to.
They actually ran it outboard here.
Kind of neat.
But look at this subframe.
It's got a bolt that comes down through here.
So if you rack and twist your subframe,
looks like it doesn't take much to switch that out.
That's really neat.
This is a 300 and like 48, 49 CC four-stroke,
belt drive four valve.
So you're gonna have two intake valves, two exhaust valves.
They're running your top end and your valve train
with a belt in here.
Does it kick over?
Oh, wait, kicks rather nicely actually.
Hopefully not too nice.
Too easy.
I don't think this bike is too nice.
Don't worry.
Now they did run a couple different carburetors.
Oh, this isn't good.
There's a big, oh yeah.
I can see daylight through our intake boot here.
Oh yeah.
Okay, they ran two different carburetors on this.
They ran a 36 millimeter TM McCooney.
I think those were flat slide carbs, the TMs.
And then they ran like a 36 Delorto.
Delorto.
Real quick look in here.
I'm guessing this is a Delorto.
I don't know.
We'll figure that out.
I'm sure we're gonna have to clean it.
Oh, there's a decompression lever up here,
but there isn't a cable hook to it and that's neat.
Guess we're not gonna worry about that.
Transmission.
Let's talk transmission here for a second on these.
These were a six speed transmission
with a wide ratio gear set in them.
So that's pretty cool.
Got the six speeds, got the dual headers.
This is our oil line coming out of the frame.
Does the petcock move?
Okay, the petcock moves.
That's good.
Look at that brake lever, man.
And that's really neat.
Cast aluminum, cleaned up.
Oh, we don't have any rear brakes.
Those are shot as well.
I don't know if we're gonna be riding this thing
if we don't have any sort of brakes on it,
but we'll see what we can do.
I'll tell you what, let's pop this off.
Pop the seat off.
Let's see if there's a battery in there
and see if it'll crank.
Dirt bike fairies just dropping stuff off.
Can't beat that.
I knew the dirt bike fairy was real.
My kids are gonna be so upset
because the tooth fairy can't even show up to our house
and here there's a dirt bike fairy showing up to my work.
Our tooth fairy's the worst, man.
She will go weeks without coming.
Oh no, that's not good.
What'd you do?
Oh, what did they do?
I didn't do it.
Ah, we got a Darlotto carburetor.
Darlotto!
I can see that right here it says it.
Would the battery be under the air filter?
Before we go whole hog kicking on this thing,
I wanna see if I can hook a battery to it
and push a button for crying out loud.
That's certainly big enough for one.
You don't need an air box that's three stories tall.
The mice were living in the penthouse up here.
They picked a good spot.
Look how deep that air box is.
Oh wow.
So you have the basement and the first floor.
Dang.
And we're up here on the, so yeah, maybe-
That's where they entertain guests is up there.
Yeah.
All right, so we're gonna have to address that air box mess.
I don't see where any cables
are going into this box though either.
Tell you what, I'm surprised by the-
Start taking stuff apart, Craig.
I'm trying to get my head wrapped around here
or how I wanna start it.
Taking things apart.
Oh my gosh.
Dig into the-
Stop it.
This giant mouse house.
Why does everything we do have mouses in it?
I don't know, but we're probably gonna find
the great mouse bee in his basement, dead in his pool.
This is why your friends shouldn't be left unsupervised
on Marketplace.
What, you gotta babysit your friends now?
Yeah.
We're gonna start seeing guys going to the bathroom
together just so that they can protect each other
from Marketplace.
I don't have a free table in the place,
so I'm just gonna work from the floor today, I guess.
It's on a stand.
It's good enough.
It's better than the ground.
Always look on the bright side, Craig.
That's right.
Yeah, and keep wearing your gloves
so the bike fairy will keep coming back.
Oh, and I get herpetitis from these mices.
Did they make their way into the carburetor?
Come on, blasted.
See how much of this air cleaner they ate?
Yeah, they ate some.
All right, what's in there?
No, it's just some dirt.
I'm telling you though, if it has a button like this,
you gotta be able to put a battery somewhere
to start the dumb thing, right?
Stands to reason.
It stands to reason, right?
It's a 94 bike.
There's no way this doesn't have a battery in it somewhere.
I'm gonna pop this off here.
Oh, check this out.
This is kind of cool.
So like I said, you have your oil in your frame
and your dipstick is here.
This is, that's how I showed you that, a little dipstick.
But you also have this tube
and that tube will tell you oil level as well.
I'd much rather look at a tube to figure out oil level.
Why don't we do that more often?
Now we're getting some room to work.
Still don't figure out where the battery should go.
It's gotta have an electric start, right?
It's gotta be back there then, right?
Maybe we start taking these panels off and we'll find it.
Maybe it's like suspended behind the air box.
I think what we gotta do is find the cables,
see if there's any electricals.
Maybe the button's just a fake.
I see zero electricals going anywhere towards the back here.
Everything heads front.
Oh, that's a regulator.
So we're getting three phase
because we have three yellow wires out of our stator.
Worst case is we're kicking it, Dan.
That's gonna be fun.
So you are still kicking it.
I guess we're still kicking it.
Nice.
Darn it.
Okay, so here, I just figured it out.
See this right here?
That's where the starter would be.
The starter would lay right across the front here.
Oh.
Boom, boom, boom.
And it would go into here.
So they did have some models with electric start.
Unfortunately, this is one that doesn't.
Why does it have a starter button then?
I'm so confused.
I'm gonna take the carburetor off.
And in doubt, clean a carburetor.
That's right.
You know, that intake boot is not so bueno.
What if we went to the hardware store
and got some of that self-sealing tape?
That's maybe what we're gonna need.
I got really excited when I saw that button.
I got really unexcited when I didn't see the starter.
That was a big swing of emotion right there.
I know I hit it well, but...
I gotta be super careful here
that I don't hurt that air boot.
Look at that beautiful beast.
So they machined a new intake bell around the carburetor.
See, it's kind of blocking half of our air intake ports here
for the jet side of things, but it's all right.
It should work just fine.
The way they would do these is they machine them
at almost like a press fit tolerance.
And then they heat these bells up in the oven
and then they stick them on the end of the carb.
And when they cool down, it's like a shrink fit.
This thing doesn't look awful.
Doesn't look great though either.
Of course, there's your fuel into your bowl, idle.
That might be like a high speed jet
and then your mixture screw here.
I don't know.
Let's take a look and see what we got
and maybe we can figure something out.
How's that sound?
We have our fuel screen in there.
Doesn't look hateful.
All right, well, we're gonna pull these carbs apart.
It's not awful.
Clean out some of these jets, blow the mouse fur out of it.
We just have ourselves a runner.
This is one of those carburetors
where it's a little more advanced
if you were going to go and do a complete
like rebuild on the carb like this.
It's not awful.
Just a few more O-rings.
This one here is the check valve.
Just some of that stuff.
There we go.
Much better.
Oh, hey, coffee.
Found the bike, got distracted, lost my coffee.
Missed you.
I don't have any gaskets or a carb kit
or anything, so I'm taking the least amount
apart here as possible.
I don't wanna get into pulling all this stuff off
and not having diaphragms or gaskets
and then they break when I'm taking it apart
and then we're sunk and yada, yada.
So this is what they call minimum evasive surgery.
See this plug right here, this little brass plug?
The reason that's there is because they needed to get a hole
between this hole and this hole.
They needed to drill out a passage from here to here, right?
So if we look, there's the passage
and it comes through here,
but they need to drill that out.
So they start here, they drill the passage
and then they come back through
and they add in the brass little plug.
This is gonna be our choke circuit.
Again, in this case, I say it all the time,
it's not actually a choke.
This one here is an enrichener
because we are adding fuel to the mix.
We are not choking off air.
This one went here, this one went here.
Before I forget, I'm gonna put a little bit of grease
on that O-ring.
So that the bowl flips over it nice.
This jet goes here.
Okay, those are snugged up.
Can go back on there.
Let's take a look here, what do we got?
Make sure this is all clean and stuff is flowing.
Looking good.
Now we need to pull the air boot off and check that.
By check it, I mean we need to figure out
how to seal up the gaping hole in it.
All right, that's right off.
Now, yeah, I think what we need to do is clean this up,
run down to the hardware store,
grab some of that self-sealing tape
and seal that thing back up.
Then we're gonna have a runner.
That's on the engine side.
So all that's gonna do is suck in air.
We'll never get the thing started.
Looks like we have a fairly fresh plug in there.
Oh, we catch a whiff of that, eh?
Oh, I think we hit the urinal.
Woo!
Oh, I think we're gonna quit there.
I almost taste it.
Oh, let's pop that out.
Let's see if we can get some spark out of this thing.
Cause that would be exciting.
Wait, what's that button work?
See if we have spark down.
Here we go.
Oh, we got a spark.
Yeah, down!
Yeah, we actually have nice blue spark.
Okay, spark, semi-clean carburetor, oil.
We need to address this oil thing.
Get that squared away.
Exciting.
Yeah, it is exciting.
Before we go whole hog on this thing.
Do you want it to be even more exciting, Dan?
Tell me what would be even more exciting.
This right here.
If it was hooked to anything, that would be way better.
Okay, so I need to find oil.
Would be nice if I could find a way to hold that bike up
without having to actually hold it.
Like, how do normal people change their oil?
You know, people who don't have tables.
Kickstand would be nice.
Just another idea.
I don't know if it's a good idea though.
That's the problem.
If we did this, maybe I need one that's longer.
If we put that in there, would that act like a kickstand?
I don't know why it wouldn't.
Oh my gosh.
Could it be a bad idea?
I don't think it's sketchy enough.
It could be more sketchy.
Oh, okay.
Here, grab underneath the table there.
Grab those, those two blocks.
Stick them underneath the end here.
That's better.
That's better-ish.
Maybe it'd be smart to grab a drain pan
just in case oil does come out.
All we gotta do is take a measurement and find a rod.
Stick a rod up in there and we'll be set to go.
Craig, did you forget your shop pillow at home?
Nobody would get anything done
if we invent the shop pillow.
There'd be mechanics just laying around, sleeping.
Do I just get duped into doing a carb clean
and an oil change?
Yes.
Turns out the dirt bike ferry
just gives more work for you to do.
Well, I guess since we're here
and we got half of a mess started,
move over and we'll pop this off.
Jeez, but that's so tight.
Nothing's gonna come out of here.
It was all in the bottom end anyway.
This is all for naught.
It's gonna be my gas.
So we just crank on that so hard I can't break it loose.
I think that's where the leak was coming from.
I don't think the leak was coming from this.
It was coming from there, not here
because that was kind of loose.
This was super tight.
Now that we know we have all the oil out,
I did do a little checking
and it seems like the transmission
and the engine are sharing oil.
So even though there's a fill hole,
I could not find any specs
on how much transmission oil to put in it.
It all says three to three and a half quarts up in here
and then it's gonna share oil.
All I can do is read the book.
Anyway, so what we're gonna do
is throw two and a half quarts up here
until we get this bike to fire up and run.
Once it fires up and runs, dry sump,
it's gonna be sucking that oil in.
We're gonna let it sit for a minute.
We're gonna check our oil and top it off as necessary.
Before we do that though, I'm curious about one thing.
Since we're in the testing phases,
I'm testing this spray on everything I can test on.
Here, take a before and an after.
Let's see if this works.
I'm getting sidetracked here, folks.
Bear with me.
Spray a little on the rag.
I don't know, can you do it both ways?
Should you do the rag first or can you spray it directly on?
You could spray it directly on, I guess.
I would recommend you start as non-conspicuous spot,
but I have yet to find anything that doesn't take pain off,
that doesn't hurt anything that I have found so far.
Check this other side.
Ah, that's got wires in the way.
Sorry, now I just wanna clean stuff.
Where else can I clean?
Oh, yeah.
I tell you what, three minutes in a can of this stuff,
you would really clean this bike up.
All I got there was a can of this stuff.
I don't have three minutes, so.
Let's get some oil.
Get some tea?
Yep, my afternoon tea.
That's an open face cup in this shop.
That's dangerous, Craig.
Yeah, you should've saw when I was soda blasting
and drinking Sprite and that was fun.
This is gonna be interesting.
How are we gonna do this?
Do we gotta use this stupid thing?
I hate this thing.
This thing's kind of the worst.
Oh, well, that O-ring is no longer an O-ring.
It's more like a C-ring or a U-ring.
Now, tell me this isn't precarious.
Oh, yeah, I was gonna say,
watch now, this hose isn't gonna fit in the hole.
Maybe I should've checked that
before I filled this to the brim with oil.
Now, all I should have to do is open this.
I'm getting thirsty.
That looks like a nice flagon of apple juice.
Now we stand here for 45 minutes while that drains in.
Is it really gonna take this long?
Well, this'll give us some time
to talk about this motorcycle here for a little bit.
This is running, ATKs ran the Rotax engine
and they did from the very beginning.
That was actually part of the deal.
Now, if you guys know,
the Rotaxes were owned by Bombardier,
Can-Am, basically, Bombardier out of Canada.
How do I wanna say it?
Rotaxes were never known for being great motors.
Let's say that.
If you guys remember the Harley police bike
that Harley was developing, not police bike,
I'm sorry, military bike, the Harley military bike
that they were gonna submit for submission
and that's when the diesel KLR won that submission.
But anyway, that bike had a Rotax engine in
and that thing was not fun to get started
if you remember from years ago.
So anyway, ATK used the Rotax engines from the beginning
and their idea was they were gonna build a bike
that was so good chassis-wise and suspension-wise
and component-wise that they could use a lesser quality
of an engine and people wouldn't notice.
That was the theory and that was the thinking.
BRP, Can-Am, Bombardier, back conglomerate, Rotax,
funded ATK in exchange for being able to provide them
with OE bikes to put on their Can-Am dealer showrooms.
However, in the last minute after the prototype
and some of the bikes were built, Can-Am backed out,
stopped with the production of Can-Am motorcycles
and kind of left ATK a little high and dry.
However, the Can-Am dealers saw this bike, liked this bike
and decided to fund it themselves.
So ATK was back up and going, that was about 1984
and in 1984 is when Chris, Chris Kandel,
is it C-C-A-N-D-E-L-L, Kandel?
He won the, what was it, Vegas to Reno, Vegas to Barstow
off-road race and really liked the bike.
So these bikes became very popular.
Not the 305, it was, I believe, a 605.
I'm gonna put another half a quart in here.
So this'll give us two and a half.
Well, why is it full?
It shouldn't be full.
Oh, it's full?
Uh-oh, did we not drain it all?
We had to have, I mean, we had that empty.
That wasn't supposed to happen, that's fine.
Okay, so where were we in our story?
Take a swig of tea.
These things are really, really cool.
There's a couple of things here, look at this.
There's a vent on the fender so you can close it
and you can open it.
As vents do, but why?
That lets air flow through
and that doesn't let air flow through like vents do.
So it makes you faster.
There you go.
Maybe if it's a real hot day, you open that up
so you get a little more air here on the down tube
where you're storing some oil, right?
Okay, cold day.
Check this out.
Again, we have WP forks.
We got a rebound, I believe that's gonna be a rebound.
Down here, it's on the side.
Normally, that's up in underneath here
so you have to get down, stand on your head
if you wanna change your rebound.
Here, it's right on the side, which is really cool.
The other really neat thing is,
if you're curious of what ATK stands for,
what it stands for is anti-torque
and it's a really long K German word.
Kennen.
Oh, you said that.
Kitten, kitten bittener.
Anti-torque kitten bittener.
Okay, so the word that it's translated to,
like the word in English is chain drive.
So it's anti-tension chain drive.
But the actual, the K for chain drive is
Kettenantrieb.
Huh?
Kettenantrieb.
Anti-torque Kettenantrieb.
Kettenantrieb.
And what that means is, when the bike is under power,
suspension's gonna be under some load,
you have the tight spot in the chain
and that can affect the bike chassis
and everything under power.
This was one of the innovations,
the anti-torque chain drive,
which would have been kind of lame,
it would have been ATC.
And you probably didn't wanna do ATC in the early 80s
because that was Honda's thing
with their three wheelers, right?
So they went ATK, plus it just sounds better,
and called it a Knifterkundrum.
Anti-torque Knifterkundrum.
But that was one of Lettner's,
what was his name?
Horst.
Horst Lettner?
He was an Austrian guy.
Actually, he won the ISD 6 days a couple times as well.
Guy was a smart dude.
So that was one of his biggest innovations.
Another really cool thing about ATK
and some of their other innovations was,
in 1989, they were the first to come out
with four stroke electric start.
That was huge.
Oh boy.
That was huge.
This bike, though, doesn't have it.
Not huge enough to be on this bike.
Some did, but not this one.
That was in 1989.
That was a big deal, right?
And speaking of 1989, believe it or not,
from somewhere there in the late 80s,
88, 89, somewhere in there,
up until about mid 90s, 95-ish,
ATK was actually the fifth largest
off-road motorcycle brand sold in the United States.
Of course, we had our top four,
Honda, Kawasaki, Suzuki, and Yamaha,
but ATK was number five.
They sold thousands of ATK bikes over the years,
and they were produced either between
the shop in California or then later on,
they moved up to Utah.
These bikes new were selling,
now they had a couple different models.
This 350 in particular, they had a dual sport model.
They also had this cross-country model.
Then the cross-country model had the lighting option,
which this one here does.
And then again, some had the electric starts.
They also had the bigger models.
It was like a 700 or 650.
They had some bigger four-stroke stuff,
which was really cool too, because back at that time,
everything, pretty much everything else was two-stroke
other than Honda was still pretty big
on their four-stroke stuff.
So these were almost indirect competition
with those Honda bikes,
actually to the point that when Honda
really wanted to make a run for the,
it was early 80s, mid 80s, 83, 84, 84, 84, 85.
85, 84.
So the 84, I'm going 84 because I like fours.
Honda was making a run
for the World Four-Stroke Championship.
They basically stole a bunch of the stuff off the ATKs,
dropped one of their motors in it and called it a day.
So it was Horst Lettner and Johnny O'Mara
put that bike together and Honda went to race it.
So there's a lot of history with these ATK bikes.
A lot of cool stuff going on here with them.
Here's another one we're going to get to, spark plug.
Let me tighten this spark plug here quick
before I get too far ahead of myself.
And then we'll go to the next cool thing.
Let me grab the carburetor and the air boot.
While you guys weren't looking,
you were probably off doing lunch or something.
I took this air boot and I kind of fixed it.
And what I did was I shmooed a little hot glue,
held it together and then I took electrical tape
and I gave it a little bit of tape.
I used the hot glue just because it was so brittle
and fragile, just to build up a little bit of structure
that I could kind of tape.
Now, the other thing, pro tip here,
I use electrical tape because I didn't have
any self-sealing tape.
But what you want to do is get good electrical tape,
hold it tight and really stretch it as you're wrapping it.
You don't want to just wrap it loose.
You want to really stretch it.
Good electrical tape stretches a lot better
than cheap electrical tape.
That's why you spend the money on good electrical tape.
The other thing I noticed, check this out
and I don't know if it'll work or not,
but what I'm going to do,
this looks to be darn near the same.
So what I'm going to do is I'm replacing these anyway.
I have four new ones.
So I'm going to take one of those and throw it in a box.
So when I figure out whose bike this is,
I'll give them that extra air boot.
And then if they want to swap that, they can.
How's that sound?
Back to really cool things here.
We should have a segment, really cool things with Craig.
Now this is running a 36 Delor, Delor, Delor, Delorto.
Delor, Delor, Delor, Delor, Delor, Delor, Delor, Delorto.
PHF 36 Delor, Delor, Delor, Delor, Delor, Delor, Delorto.
So that's a little less cool
than if it was running the 36 McCooney, but it's not.
So we're not going to dwell on that.
So one of the cool things is in 1992,
ATK came out with the first fuel-injected dirt bike,
the first fuel-injected four-stroke,
which was pretty awesome.
So these guys were full of innovation.
What are the chances?
Let's step in here for a second.
Like a glove.
It's amazing.
Look, do our part numbers match?
9, 2, 8, 3, 1.
Look at that.
Looky there.
I crack myself up.
Guys, that was a joke.
I know it's a zip code.
Crying out loud.
I still think it was funny.
Delorto.
Yo, if we ever do like a bearded mechanic frozen pizza.
Okay, go on.
We're going to name it Delorto.
Delorto.
What are the types of pizza?
That's a great question.
Like the Kawasaki is just extra cheese.
Three cheese Kawasaki?
Yeah, we spell it K-A-W-S-A-K-I.
Does like the greasiest pizza option,
is that one the Harley?
Yeah.
Because it's just going to leak.
It's all meat.
It's all different kinds of meat.
Yeah, because they're like, you know, Harley hog.
So it gets all the.
You got to put pork on it.
Yeah, it gets the sausage, the bacon, the pepperoni.
There you go.
Honda, we'll make Honda the vegetarian pizza.
What would Yamaha be?
I guess Yamaha might just be straight pepperoni
since it's the best.
Suzuki would be like Hawaiian.
I don't know why.
What would Indian be?
Tobacco.
Indian would be the most decked out flavor.
Yeah, right.
No, Supreme.
It would just be Supreme.
Yeah, yeah, yeah.
And we'll just price it really high.
The Harley will come with like an extra drip tray,
drip pan.
Yep.
To put underneath.
Comes with its own drip pan.
To believe.
And that might actually just work.
I just noticed something else.
They ran the brake line,
the master cylinders on this side.
And then the brake line comes over,
around and over to that side.
Okay, now that I got that done here,
I said I wanted to show you something over here
that was kind of cool.
See, here's my kickstarter.
It's on my kickstart shaft.
My gear shifter is on a shaft
that's on the inside of this kickstart shaft.
See, look, they're mounted to the same place.
See that?
So this-
Dual purpose shaft.
Yeah, kickstart shaft.
Goes through that spline shaft that the kicker's on
and back into the gearbox.
That's pretty groovy, eh?
Okay, so we have oil.
We'll put the plug in.
We have a clean carburetor for the most part.
Taped up air boot.
I think all we need from here, Dan,
is a little bit of fuel line.
Put the tank back on.
Put the seat on.
And then, you know what time it is?
Time to clean off the floor.
That's good, because you left a crime scene.
Yeah, escalated quickly.
Man, I am getting aromas of mouse.
Mouse musk.
Yo, that should be one of the air fresheners.
No, it shouldn't.
Yeah, it should be a mouse on a motorcycle
and it should be called mouse musk.
Obviously, it doesn't have to smell like mouse pee.
Man, what a fun surprise this was.
Not every day when the bike fairy shows up
and gives you more work to do.
Right.
And especially with a bike
we've never had on the channel before.
It's a bike I never messed with before.
This is actually kind of fun.
Do I want the seat first?
Or do I want to do fuel line first?
Let's see.
Oh, that's not going to be in our way.
Not in love with the way those taillight wires
are ran right next to the seat.
It's a good way to pinch wires.
Okay.
Amanda, you're just in time.
Don't go anywhere.
Guessing how many kicks?
I get to be a part of guessing how many kicks?
Yeah, you're a part of it today.
I'm so excited.
I don't know if I want to kick with a man print on.
I'm going to take my man print off to kick.
I don't even know if I want to kick with a sweatshirt on
if I'm being honest, but we'll see here.
I know I'm coming.
Okay.
So let's turn on the gas, see if we have any leaks.
No leaks.
Let's make sure we have gas.
Make sure we have gas flowing, which we don't.
Let's try this.
Wish those front tires would grab that good
when I have them on the bike.
All right.
This is a real good way to get messy.
Oh, I'm getting, now it's leaking up around here.
Didn't work any of the way I wanted it to.
Now that's just going to leak, isn't it?
Can't just hook an IV to it.
Can't always hook an IV to it.
IV, stat.
We're on it, doctor.
Suction, stat.
Hold on guys.
Bear with me here a second.
Man, I don't go anywhere.
This will only take a second.
Good stuff.
I can tell by the way it splooshes in the bucket.
Yeah, that's, by the way, it plops.
Good and used evaporized.
I'm going to suck that gas out of the tank
or else that's just going to keep dripping
all over the place.
And it's going to make a mess.
That gas I put in,
I'm just going to take it right back out
and throw away, apparently.
Man, I put a lot of gas in there, didn't I?
Let's turn this on.
That one's leaking yet.
That's a good sign.
We don't have a front brake.
That's a good sign.
On switch, off switch.
Just to make sure.
No, start button still doesn't work.
Darn it.
Just checking to see if there might be
a little ghost starter down there.
Yeah, see if I can turn on that Del Roto enrichener.
All right.
Dan, how many kicks?
14.
Amanda, how many kicks?
Nine.
Craig, how many kicks?
Yep, that's a lot too.
Craig, how many kicks?
Man, I really hope it's less than a baker's dozen.
So let's see here.
I'm going to give it a primer.
It's almost kicking too easy.
Why would that be?
There's a light coming on.
Is it?
Yeah.
It's trying to do something.
It doesn't sound like the engine's doing anything though.
It feels like zero compression.
Yeah, it's not feeling good at all.
Okay.
I think the decompression lever was in the wrong spot.
Man, I just spit when I talk.
That sounds a lot better.
That's the loudest kicker.
Right?
What's that?
I don't know.
There's a lot of positions on that decompression lever.
Hey, that sounded good.
That's sounding the best so far.
What was my guess?
Below, yeah, below baker's dozen.
We're about eight times that.
I don't even know what you're adjusting anymore.
So what?
The choke lever.
Okay, so choke lever, decompression.
Yeah, just trying to make sure
all the bits are in the right spots.
All right, let's pull the seat off maybe.
Get some go juice a little more directly in there.
Let's see what happens.
Air, come on.
We're broke.
11 and a half.
Sure, Craig.
Hey, isn't that cool?
What are the chances the clutch works, Dan?
Oh.
Wanna take it anywhere?
Wanna take it around the shop?
Oh, we don't.
Yes.
Oh, we even did it again.
Three kick wonder.
Three kicks.
Lights work.
So you know what you don't need brakes for?
I know.
Oh, you know.
Oh, I know.
Okay.
I know.
Are you gonna bother screwing that seat back in?
Nope.
All right.
It'll be funny.
We'll do it by a story with Ava.
See if this thing will fire.
Oh, it'll fire.
Needs a little coaxing, but it'll fire.
All right, this stinks.
I guess the air purifier's,
air filter's just, you know, holding it back.
Yeah.
Grab me some spray, please.
Yeah.
Test.
Wasn't bad for a couple hours in an afternoon.
Have a little fun.
This bike still takes a bunch of work.
It doesn't have brakes.
It needs to start a little easier than what it is.
It needs some work in the intake manifold area,
in the handlebar area.
But hey, find yourselves an old bike, car, boat, plane.
I don't care.
Start wrenching, having fun, and learning something.
You guys have yourselves a great weekend.
We'll see you later.
We rattled some more mouse out of it.
Some more mouse.
