Adam's C20 is all dialed in and Ryan's walking through everything about this new Revival series build. This '70 C20 keeps things pretty clean and simple - we focused on the bare necessities with just a few modern touches where it counts. The supercharged LT4 setup is absolutely sweet and this thing is a blast to drive. Ryan breaks down the engine bay, goes through all the gauges, shows how to work the AC and radio controls. Love how we kept everything clean while still covering all the important info. We also go over the little things - where everything's located and how all the systems work together. Nothing crazy complicated, just solid functionality that works. The whole team did a great job keeping this build focused on what matters most - a truck that drives as good as it looks and doesn't overwhelm with gadgets. This is what the Revival series is all about - bringing these classics back to life the right way.
Make sure to follow us on Instagram, Tiktok, and Facebook to see the behind-the-scenes on our truck builds, chassis projects, and new parts, and subscribe to our channel and hit the little bell icon so you don't miss a video. Thanks for watching.
Check out our site for hundreds of quality and custom products for classic trucks. Ford, Chevy, GMC, and even Dodge. www.fatfender.com
Feel free to shoot us an email if you have any questions at [email protected].
Hello everybody. This is Ryan with Fat
Fender Garage and uh we're here with
Adam Ray's 1970 C20 long bed pickup
powered by a supercharged LT4 engine.
This is kind of a owner's manual
walkound of the different features and
operating characteristics of the truck.
We're going to start up here. This is
the fuse box for the control pack for
the engine and transmission. There's a
few different fuses and relays in there
that help the engine operate. Forward
here is the battery. And down here below
the battery is the main 200 amp circuit
breaker. If something happens with the
electrical system on the truck that will
stop the electrical current from
flowing. That would be this the
electricity is off to the truck and that
is reset so that everything is
connected. Over here we'll move over.
We've got the heat exchanger for the
supercharger intercooler condenser for
the air conditioning radiator. There's
the radiator cap. This is the radiator
coolant overflow tank. Provides a little
bit of a reservoir for the coolant. It
does have a drain in there that keeps
the coolant at the proper level. We have
the power steering fluid reservoir and
the coolant reservoir for the
supercharger and intercooler.
There is a vacuum pump down in there
that helps give enough vacuum for the
brakes to work properly. When this thing
has been driven with a lot of boost,
they don't produce a lot of vacuum for
the safe brake operation. Brake master
cylinder here. Reservoir holds all the
fluid for the brakes. And then here we
have a reservoir for the windshield
washer system. That's about all of the
things we need to know about under the
hood. We'll come back here to the back
of the truck. We have the flip up gas
door with the gas cap so we can fill the
tank
in the middle of the bed there.
Tailgate operates as normal. The truck
is very similar to how it came out of
the factory. We didn't add a lot of
extra stuff. On the interior,
we have the the headlight switch
operates as normal. The wiper washer
switch operates as normal. You have your
subwoofer volume knob here. And this
here is the selector switch for your
Dakota digital gauges. So when we turn
the key on
and the gauges all wake up,
you can choose some of the information
that you see on the screens with this
button.
And these screens are all customizable
through the the setup feature. Enter the
setup for those gauges. You just need to
hold the button as you turn the key on
and the screen will display setup. And
then you're in the setup menu and you
can scroll through and change a bunch of
settings in there and customize them
however you would like them. The truck
has automatic headlights through the
coach controls which is the main fuse
panel that is located under the left
side of the dash here in case you have
any electrical issues. There's a bunch
of fuses in there that you can check.
The automatic headlights will come on
when it's dark outside. And if you
choose to not use the automatic
headlights, all you need to do is turn
on the headlights via the switch and
then turn it back off and the headlights
will be off until the next time you shut
the key off and and turn it back on. So
up under here we have the data link
connector where you can plug in a
computer to get information from the
engine control computer. Right now this
this plug is plugged into it and this
sends information to your Dakota
digitals. This is where you get RPM and
water temperature, a couple other things
from, but they it's it's just tucked up
underneath the front edge of this dash
right here. And you can plug a scan tool
into it. It can be scanned as I think a
2016 Corvette with a LT4, and you'll be
able to get all the engine information
out of it. Retrieve uh diagnostic
trouble codes if it has any. There is a
check engine light in the dash. If
something goes wrong, it will
illuminate. And that's how you would get
your information from the engine
computer. We have your retro sound radio
here. And to turn it on, you would just
hit the button there.
It will wake up.
And then it's already set to Bluetooth
audio, but I don't think anything is
paired to it. So, it's going to tell you
it has no device. Your input selector is
kind of this ring that's behind that
knob. You can choose radio, Sirius XM,
but there is no receiver for that at
this point. Auxiliary,
which would be I think if you plug in
something to this port right here, it's
a USBC port. You'd be able to run a
wired connection to the stereo. This is
your volume knob
that turns the radio up and down. And
then this knob here is your tuner. This
knob here will cycle through your
presets.
And then to turn it off, you just hold
this knob till it says goodbye. Then the
AC heater controls. This top slider
chooses between dash, defrost, and
floor. It's just a slider. That would be
the defrost position. And that would
send the air to the floor. And then you
have a temperature slider here. Goes
from cold on the left to hot on the
right. And your blower motor switch here
is off at the top. And as you pull it
down, the fan speed will increase. It's
kind of infinitely adjustable. There's
no detents. So, it's just wherever you
put it, the fan will just go faster or
slower. All right. Your power windows.
We put on the classic looking almost
looks like a regular window crank. So,
you just hold the window crank up for
the window to go up and then push it
down for the window to go down. Uh, with
the Coach One system, these do have
one-touch operation. So, if you just
touch it up and let go, the window will
go all the way up. And if you just touch
it down, the window will go all the way
down. And both doors work exactly the
same. Those are all the features. This
this truck is very nice, but it's fairly
basic as well.