Make Captain Americas Shield From Cardboard in 4 EASY Steps!

Shielded Dynasty Network
2 followers
8 Video Views·Aug 15, 2025
Learn how to make Captain America's shield from cardboard in just 4 easy steps! This tutorial includes templates for an accurate and impressive replica. Grab your cardboard and get crafting!
Today I'm going to show you how to make an impressive Captain America shield using this
cardboard box.
Let's do this.
So if you are new to this channel, I'm your friend and here I do tutorial videos where
I show you how to make amazing props from your favorite movies and TV shows using templates
and cardboard.
That's exactly what we're gonna do.
Also don't forget to check out the description box below as you'll find there all tools
and products that I use in this tutorial.
Now let's dive right in.
First things first, get your hands on those templates from my shop.
Links down in the description box below.
Now glue those templates onto your cardboard and grab your weapon of choice, box cutter
or precision knife.
Me, I swear by the precision knife.
It's clean, sharp and slices to cardboard with a high accuracy.
Ok that may look like a lot of cardboard to cut, but no stress, it's not that much, just
take your time, stay sharp, remember this is a marathon, not a sprint and I promise
you at the end you'll be very happy with the end result.
Start with piece number one, crush those corrugations a bit to give it a slight curve.
Make four more, glue them along the edges and voila, you've got your base circle.
Now cut pieces number two and two bits, glue them together the same way and add a slight
curve.
Make four more and attach them along the edges of piece number one.
Once that's done, seal all the notches with glue.
Time to mix things up, mix two parts water, one part glue.
Tear off some grey paper, Amazon delivery paper works great, and cover the entire top
surface of your shield for a smooth battle ready finish.
Flip the shield over, take a sharp object, push pins works great, and push through the
center to mark it on the top side with a pencil.
This will be your guide for the next step.
Now grab some grey uncognitive cardboard.
Cut two pieces number three, glue them together, then stick them on the shield aligning the
tip with the center.
Make four more and arrange them in a star formation.
Repeat the process with piece number four, reinforcing that iconic star.
Glue piece number five here, leaving a tiny gap at the side.
Then glue piece number five bits right next to it.
Repeat this process for the remaining four gaps.
Now for the first ring, stack three layers of piece number six, glue them around the
shield making sure they line up with piece number five, leaving only a tiny 3mm gap in
between.
For the second ring, stack two layers of piece number seven.
By the way, if you don't have grey uncognitive cardboard, no worries.
Just glue some of the grey paper you used to cover the shield earlier onto the brown
cardboard you have, like Amazon envelopes.
It will work like a charm.
Yeah.
For this ring, alternate between pieces seven and seven bits, the one with the notches.
Now stack and glue piece number eight for the third ring and piece number nine for the
final outer ring.
This is where your shield really starts looking like caps.
Once that's done, use some grey and brown paper to hide all the seams between the pieces.
To finish the fourth ring, glue another layer on top using piece number ten.
Keep it flush with the edge of the shield for that smooth polished look.
Now take a grey pencil and darken these five areas around the star.
Then flip the shield over and cover the back side with grey paper just like you did for
the front earlier.
Now let's work on the back of the shield.
Glue pieces eleven and twelve together like this.
Make another one, flip it and glue it underneath then cover the whole thing with brown paper.
Here's a cool trick.
Take small strips of grey paper, roll them up, dip them into the glue and water mix then
slice them into little circles.
This will serve as the shield bolts.
Cut a piece number thirteen, fold it along the red lines, cover it with brown paper and
glue it right here.
Make another one exactly the same way and glue it on the opposite side.
Then glue the entire element onto one side of the shield and make another one for the
opposite side.
Attach some straps to the mounting pieces so you can properly handle your shield.
Then to lock in that iconic metallic shine, apply two layers of a glossy varnish.
It's done.
And there you have it.
An impressive Captain America shield made out of cardboard.
Now if you want to make more props and things out of cardboard, click on this video right
here, google if things are like it.
Don't forget to subscribe if you haven't already and hit the notification bell so you
don't miss out on my next epic cardboard tutorial.
Thank you so much for watching and I see you in the next one.
