Viewers of these videos and others familiar with conservation of artworks will recognize that one of the most common refrains is "archival and reversible." Conservators hold that phrase sacred and as a guiding principal for their work. Conservators labor to ensure that the work they execute will be stable for the long term, will not cause harm or damage to the artwork and is able to be safely removed in the future if ever needed.
In this video Julian demonstrates exactly what that phrase means by revisiting a conservation he completed five years earlier. The first successful conservation addressed a several issues that the painting presented. Unfortunately as is sometimes the case, the painting suffered additional incidental damage and returned to Baumgartner Fine Art Restoration. It is during this second visit to the studio that Julian reverses all of his old conservation work as he labors to again conserve and restore the painting. It is through this pursuit that the difference between antiquated materials, approaches and techniques and modern ones can be clearly seen.
This video is brought to you by Squarespace.
From websites and online stores,
to marketing tools and analytics,
Squarespace is the all-in-one platform
to build a beautiful online presence
and run your business.
Meet Anne.
This isn't Anne's first time at Baumgartner
Restoration. In fact,
five years ago, I first
met Anne when she came into the studio
looking a bit worse for wear.
She was discolored
and dirty, and needed a little bit of
attention. And when I sent her
home, she was looking right as rain.
Now, in preparation
for an upcoming move, Anne
came off the wall and went onto the
couch to relax a little bit.
Her loving cats,
seeing this, decided to join her
and, well, got
a little too close.
The cats ended up sitting on Anne
and causing a bit of damage.
You can see the tears and the
holes and the other canvas
deformations as a result of
these cats sitting on her.
So,
Anne's back for a
little bit of touch-up.
And, frankly, I'm not all that
disappointed, because
I really like Anne, and I'm looking forward
to spending a little time with her.
Now, if you were curious what Anne
looked like the first time I had her,
well, here you go.
She was really quite
dirty, lots of discolored varnish,
and a massive hole
that was revealed as I took off the
overpaint right in her forehead.
But, I sent her
home looking better than she came in,
and I'm looking forward to doing it again.
Now, what's really
exciting about this project is that it allows
me to share with you something that I've talked
a lot about in my videos, and that's
something you're probably already familiar with,
and that's archival materials,
minimally invasive techniques, and fully
reversible materials.
Any modern conservation
needs to use archival materials so that
they don't change and deteriorate over
the future. Minimally invasive
techniques to preserve both the integrity
of the artwork and the artist,
and fully reversible materials
so that if ever the conservation
needs to be undone, it can be
without running risk of damage to the original
painting. And even though
this work isn't terribly old at five
years, it's going to allow me to
show you exactly what that means,
and how the choices I've made
and the materials I've selected
play into that calculus.
And it all kind of begins with removing
the painting from the stretcher.
And I use tacks
because they're really easy to remove.
Now, if I had glued
this canvas down with rabbit skin
glue or wax resin,
it'd be much harder to remove, and it would
make a bigger mess. In addition,
I can salvage these tacks if I want
and reuse them. They're only five years old,
and there's no reason to throw them away.
They aren't damaged or rusted.
Now, one thing that you may notice
is that my original label from five
years ago is missing.
And that's because somebody removed it.
So I can include labels and
reports with all of the materials and
techniques I used, but if
somebody takes those off, unfortunately
all of that information is lost.
Now, after I get this
canvas off of the stretcher,
I'm going to need to do kind of a
pre-treatment before I can
tackle the tears and
reversing all of my conservation work from the
past. And that's because when the
cats sat on the canvas, they
broke through and created several
distortions. Those are
bumps and dents and other
planar deviations that are problematic.
So what I'm going to do is take some
acid-free cotton blotter paper
and moisten it with
distilled water, and then place those
pieces of blotter paper
over the planar distortions in the
canvas and press them with weights.
I'll let that sit overnight,
I'll come back, I'll change them out with
dry blotter paper, and I'll repeat
until the canvas is flat
and smooth and in a
stable state.
So this is the point in the video where I take
a break and I talk to you guys about Squarespace
and about how amazing they are for artists
and creative people. Because with a few
clicks, you can get a website up and running,
you can customize some gorgeous
mobile-friendly templates,
you can even import your
images from other platforms all over
the web, so you can get your content
on your website.
And Squarespace even has a built-in e-commerce
solution in case you want to sell something
through your website.
But I get it, not everybody watching this video
is an artist or a creative
person, so how about this for a
pitch? Squarespace makes
websites, and websites exist on
the internet, and the internet is
really only good for one thing,
and that's funny cat videos,
so maybe you
want to build a website of
your own funny cat
videos. I mean,
you don't want to get on the cat's bad side.
Look what they did to this painting!
So head over to
squarespace.com for a free trial, and
when you're ready to launch, go to squarespace.com
slash Baumgartner to save
10% off your first purchase of a
website or domain.
Okay, the cats are happy,
you've built that funny website,
and now back to the painting.
I've let it rest for a couple days, I've changed out
those blotter papers, and
now the canvas is flat and
smooth, and that's really important
because I want to make sure going forward
we don't have any bumps that could
get in the way.
Now the next thing I'm going to do is remove the
strip lining that I added, and
I use a
heat and solvent activated film
adhesive to bond this new Belgian
linen canvas to the original canvas.
And with a tacking iron, I can
heat up that adhesive
and it softens, and I can simply
peel back the
strip lining canvas.
And you can see just how easy
this is compared to something
like rabbit skin glue
or wax
resin or PVA
or contact cement or
epoxy. This is
about as easy as reversing
a strip lining can be.
And when I do it, I'm just
taking off the canvas. I'm not
damaging the original or pulling
any of that apart, and that's
really, really important.
And so, as I'm
removing the strip lining canvas, you'll notice
that the adhesive gets soft
and it sticks to both
the original canvas and
the strip lining canvas.
And that's not really a problem because
I can remove that, again, with
heat or solvent. Now,
I'm not going to use heat to remove it because
it can create a little bit of a mess
and it can burn if I apply
the tacking iron directly to it.
So, what I will do is once
I have this strip lining fully removed,
I'll go back in with the appropriate
solvent and I'll expose
that adhesive to it,
allow it to swell and soften,
and then remove it with a
cotton ball. And the solvent
that I'm using here to soften up
this adhesive is one that
doesn't pose risk to the painting.
And I know that not only from
experience, but because I tested it
when I worked on this painting the first time.
I certainly wouldn't use an adhesive
that required a solvent
that would damage the painting.
But, as you can see,
all of that adhesive comes off
pretty easily, and now the canvas
is left as it was in the original
state before I did the strip lining.
And just like
with the adhesive I used on the strip
lining, I can expose the
adhesive I used for the bridging to the
appropriate solvent or solution
and allow it to swell and soften.
And once it's soft,
I can use the scalpel to peel up
those Belgian linen strands used
in the bridging and remove
them from the canvas.
And this is in contrast to
let's say a canvas patch
with rabbit skin glue,
or PVA, or
epoxy, or some other adhesive.
This comes off very
easily. I mean, literally, in a matter
of seconds, I've removed the
repair. And in a matter
of more seconds, I can remove
the adhesive. Now the cotton
ball does shed a little bit, but I can
rub all of that up and get rid of that residue.
And so,
this was extremely easy
to remove, and there's
nothing left on the canvas, which is
the whole point of using reversible
materials. Now one of
the most exciting things I do as a conservator
is removing old varnish
from paintings. And that natural
resin varnish is usually very
yellow or brown, or
cracked and brittle, or
even sometimes cloudy.
But in this case, because I used
a modern synthetic
ultraviolet stable varnish with a plasticizer
in it, it's pretty much
immune to all of those pitfalls.
It's not yellow,
it's not cracked or brittle,
and it's not cloudy. And
the best part is that it comes
off of the painting using
an extremely mild solvent, one
that won't damage the painting. And again, I
know this because I tested the painting when
I applied the varnish the first time.
And so, unfortunately, for you
as the viewer, this is really
anticlimactic.
But as the solvent evaporates, you can
see the difference between the unvarnished area
and the varnished area.
One thing you'll also notice is that I'm using
large cotton balls as opposed to small
swabs to remove this varnish.
And that's simply because, A,
I know what type of varnish was used,
B, I know that the solvent that I'm
going to use to remove it won't harm the
painting, and there's no reason
why I can't use a larger swab.
It's a little bit
more efficient, and
it gets the varnish off just the same
as if I was using a small one.
And now
we've come to a part of the Conservation of Anne
that I'm not terribly excited
about, and that's the
reversal and removal of the old
retouching. And
I'm kind of bummed about this because,
to be frank, this is some pretty
darn good retouching.
Kudos to the past conservator.
And it's kind of disappointing to have to remove
it just to have to redo it.
It was a lot of work the first
time, and it's going to be a lot of work
this time. But
unfortunately, the presence of these paints
is going to interfere and complicate
some of the procedures and
materials that I'm going to be using
to complete the Conservation of Anne,
so this retouching
has got to go. Now, these
paints don't use oil as the
binder, like oil paint.
They use a resin. And so
when they dry, they don't cross-link
and harden and
oxidize like oil paint does.
Which means that, in the future,
they can simply be removed
by exposing the retouching
to any number of solvents.
And the conservator can choose the solvent
that's best for the painting
and simply roll over the
retouching and lift it right off.
And there's a big difference between
reversibility and removability.
Just about everything is removable.
I mean, you can use
really harsh chemicals to
remove oil paint. You can use
invasive and aggressive
mechanical means. Heck, you could
sandblast a painting and you could get the old retouching
off. You'd be left with a raw canvas,
but you would have removed
the old retouching.
But reversibility means that they are
designed to be removed.
And that, in the process of removing,
no damage will occur
to the original painting.
And so that's the real benefit of using
paints that are designed for
conservation. They are reversible,
removable, without the
risk of damage to the painting.
And so, in what, two minutes
or so, you've seen me remove all
of the retouching that I put on this painting?
It's pretty easy, eh?
And if there was any
doubt about the solvent I'm using
and damage it may pose
to the original paint,
I'm using a swab here saturated
with solvent on the blue, which
is generally a pretty fugitive
and delicate area. And as you can see,
nothing is coming up.
Nada. Zip. Zero.
Zilch.
Just as we like it.
Now at this point, with
all of my old work removed,
I can turn my focus towards
putting Anne back together.
And that all begins with an
interleaved lining. Now an
interleaved lining is a procedure whereby
a new piece of canvas is adhered
to the back of the original canvas
with a rigid substrate in between.
And this is done to
provide extra support to a painting
that is otherwise damaged or fragile.
And the fact that these cats
damaged this painting just by making
contact with it tells me that this canvas
really is brittle and will benefit
from that interleaved lining.
And the first step is to
apply an adhesive
to the back of the canvas.
And this is a solvent heat-activated
adhesive that has been warmed up
to facilitate flow and adhesion.
And I'm just getting good coverage
to make sure that all of the canvas
will bond to
the substrate and to the lining
canvas.
For this lining, I'm going to be using a piece
of PET film. And I like
this material because it's immune to the
solvents that I use, and it doesn't
move with heat or humidity changes,
and it provides just enough
rigidity to immobilize this canvas
from any of those environmental
changes that would cause micro-
movements and make those
tears and holes more
pronounced or even telegraphed to the front
of the painting, which is something, of course,
that I don't want.
So I'll mark and trim the
PET film, and then I'll
locate the inscription on the back of the
original canvas. And this is because
I want to create a window so that we can
see this inscription through the
lining. Now, I've seen other
conservators in the past do tracings
of inscriptions and take photographs
of inscriptions when the painting has to
be lined, and that's totally okay.
And, in fact, that's absolutely necessary
when there isn't an
interleaf or a rigid substrate.
But because I'm using that substrate,
I can create a window.
So the first thing I need to do is remove the
excess adhesive from this window area.
And that's done with a solvent
that just
softens up this adhesive, and you can see
just how easily it is to remove.
And that's really one of the benefits of using
modern conservation-designed
adhesives, that we don't have to
get really messy, and we don't have to
use really aggressive
solvents.
So once I peel back this blue painter's
tape, you'll be able to see the
window that I've created, and
that's important that there's no
adhesive there, because the excess
adhesive would gum up the works.
Now, I'm going to be covering that window
I created with a piece of blue
painter's tape, and that's necessary
so that I can trim out the canvas
in the next step.
Now, with the location
of that window marked off with
the blue painter's tape, I can
start transferring it from the PET
film to the Belgian linen
lining canvas. And this
is where having that blue painter's tape
is really helpful. It's
much easier than trying to measure
and transfer those measurements from the film
to the canvas, and then trying to
ensure that I've got straight lines in
the exact size. Here I
can just trace around that tape and
get the exact location and the
size of that window that I had created.
So, much easier.
Work smarter, not harder, of course.
Once I've got that
location, I will trim out that
window with a really sharp blade
because I want to make sure that I don't
fray the canvas and get any fuzzies
because this will be visible from the back.
So I can remove
that window, and I can trim off any
extra strands, and I can
prepare to start
assembling the painting for the lining
process.
Now this lining contains several
different parts. There's the original
painting, there's the interleaf,
there's the lining
canvas, and then the adhesive that's used.
And at this point, I just
need to make sure that everything is
where it should be, that everything is aligned,
that the adhesive film
that I'm ironing on is
in the exact location that I want.
I'm going to cut out the
window from that film, and then I
can start to put the sandwich all
together. And there's nothing terribly
complex about this, but it's
really, really, really important
that everything is precisely
lined up, because you only get
one shot at this. Now yes, I
can certainly reverse this if it doesn't
line up, but that would be a waste of
material and time, and there's
absolutely no reason why I
can't get it right on the first shot.
So, with everything
aligned and set where it should
be, I'm going to tack the painting
in place, just on the corners,
and I will transfer it over to
the hot table, where I will begin the
lining process.
With the painting on the hot table,
I can evacuate the air, turn the temperature
up, and finish the
process of lining this painting with an
interleaf.
With the lining complete, I can now turn
my attention to stretching the canvas
onto the original wooden stretcher.
And here we can see
the window that was cut out of the lining canvas,
and just how effective it was at
revealing the inscription.
Now before I'll do the stretching,
I'll take advantage of the painting being flat
on the table to apply the fill-in medium
where the paint was lost.
This medium is necessary to fill
in any voids, any chips, any cracks,
otherwise there would be a
gap when the retouching was completed.
I'll apply the fill-in medium and
overfill around the entire area,
try to remove as much as possible,
and then come back later and remove the rest.
And this
fill-in medium is flexible
and water-based, so
it shouldn't crack over time, and
if it ever needs to be removed,
warm water or warm water
with a little bit of solvent in it can
easily take it up.
Now once that fill-in material
has dried, I can begin the removal
process. Now I can't use
sandpaper or anything else terribly
abrasive because it would damage the paint surface,
but I can use my fingerprints
because they're just rough enough
that they can start to remove some of the
high spots. And when I'm done with
that, I can come back with a cotton swab,
dampened of course,
and just start to remove any of the overfill.
Now it's really important
that I get all of this overfill off
because, as it currently is,
it's covering up some of the original
paint, and I don't want that.
But I also want to make sure that it's level
and smooth so that when I'm done
doing the retouching, it doesn't look like a
big bump or a wrinkly
surface.
Now with all of the excess fill-in
material removed, I can begin
putting the canvas back on the stretcher.
These old wooden
stretchers sometimes have a tendency to
fall apart or go out of
square as they're being handled, so
once I've squared them up, I'll secure
them in place with a couple of nails
in the back, and those will get removed later on.
Once I have the painting
oriented on the stretcher as I want,
I'll place a couple of tacks in the middle
of each side, and then work
from the center out.
This is an approach that helps eliminate any
slack that may be caught in the canvas.
But because this canvas
has been lined with an interleaf, I don't really
have to worry about slack.
In addition, I don't even really have to worry
about tension. You'll notice I'm not
using pulling pliers, and in fact
I'm not really even pulling the canvas
at all. This canvas
is fully immobilized with that interleaf,
and that means that as the humidity
changes, the painting isn't
going to expand and contract, and so
I don't have to worry about
adding tension and keying the painting
out on the stretcher.
Now in the beginning of the video, I talked
about how it was much easier to remove
this canvas from the stretcher because
all I used were tacks, and
I'm going to repeat that practice so that
in the future, the next conservator
and my god, I hope it's not
me, as much as I love this painting,
working on it twice is enough,
the next conservator will have
just as easy of a time as I did
when I removed my old work.
I tidy up my corners
just because I think it looks nice, and
even though many of my clients never
ever see this, or even if they do
don't even notice it, that's a good thing.
The last thing I would want them to see
is something that they took notice of
because they didn't like it.
Now I mentioned that this painting didn't need
to be keyed out, and it doesn't,
but I'm going to install the original keys
back in because they're original,
and they also help keep that
stretcher together and tight
so that it doesn't move around
or get loose.
And of course, I will always
tie these keys in place so that they don't get
lost, and that's important because I don't
want them to be lost forever, and also I don't
want them to fall in between the painting and the
stretcher and create a bulge.
The use of
an isolation layer before retouching
can be used for a couple of reasons.
If the underlying painting
is vulnerable to the solvents that
would be used to remove the retouching,
then a layer
of resin applied before
the retouching can protect and
isolate the original paint from that
solvent. But in this case,
and more often than not,
I'm not using an isolation layer
to protect the painting. I'm using
it to simulate what the painting will look
like after the final varnish has
been applied so that I can do my retouching
according to those colors, because
as you can see, there's quite a difference between
the dry painting and the areas
of the painting where this resin has
been applied.
And any painting where there's a lot of retouching
or particularly difficult retouching,
applying this layer
of resin gives me the best
possible chance of executing that retouching
as best as possible on the
first shot.
And this resin is synthetic,
it's not going to yellow or
get brittle over time, and
it's easily removable with a solvent
that shouldn't and will not harm
this painting, and I've made tests
to ensure that.
In addition, this resin is different
than the one that I will use for the final varnish,
so if the final
varnish gets corrupted by anything,
it can be removed without damaging
or altering this resin.
So I'll apply
this to the entire painting,
and then go over the painting to make sure that
there are no fuzzies or brush hairs,
and if there are, I'll remove them
because those can be problematic later on,
and it's always easier to address them now.
And now
on to my favorite and least favorite
part of conservation, the retouching.
It's my favorite part because
it's where I get to see the painting
come together, and get to see the damage
disappear under my own hand, and that's
incredibly gratifying and rewarding.
It's my least favorite because it's
really hard sometimes, and
it can be really frustrating if things
aren't going your way.
Now, the type of retouching
that I'm going to be doing here is
commonly known as mimetic
or integrated or
full retouching, and that's in contrast
to an approach called
strategio, which is an
Italian word that means
sketching or hash marks.
And that's an approach whereby instead of
trying to retouch the damaged
areas so that they completely disappear
and that they blend into
the surrounding paint
and effectively unify the entire
image as one, a series
of little dots or hash marks
or check marks
are made so that
from a distance, the damage disappears
but upon close inspection
the damage can be seen pretty clearly.
And this was an approach
that was developed in Italy in the
late 30s and early 40s.
And at the time, it was completely
appropriate and made a lot of sense because
reversible and archival paints
hadn't yet come into widespread
practice, and so many conservators
were still using oil paint to do retouching.
And the consequences of using
oil paint are pretty high.
It's a permanent medium that
will change over time, and
it's not really all that reversible.
Yes, we can get it off,
but removable isn't the same
as reversible, if you remember from the beginning
of the video.
The approach was designed so
that the damage could be addressed in a way
that would allow the viewer to see
the painting as a whole from a distance
but still acknowledge that the
painting had been worked on by a conservator
and that those areas of
retouching were different than the original.
But now, since we
have modern archival
and reversible paints,
there's not really much reason
to continue that approach, at least for private
practice. Almost none of my clients
want that approach, and even
those museums and institutions
that I do work with, they don't
want that approach.
I believe it's still commonly practiced in Italy
and on some old masterpieces.
It's very much the norm,
but until my clients
ask for it, it's something that
I generally don't recommend
because they're usually not very satisfied
with the results. They want their paintings
to look as if there's been no damage.
And, like I said, because
these paints can be easily removed,
there's really no consequence.
If somebody decides that they
don't like the retouching, well, you saw
a swab with the solvent
can wipe it right off.
And because these paints fluoresce under
ultraviolet light, we can always
see the work that the conservator has added.
So it's not a matter of
trying to hide the work
or it being permanent.
All of those issues for which
Trattegio was developed
have largely been solved.
Now, one thing you may
notice is the brush that I'm using.
It looks old and kind of beat up
and the bristles are all twisted
and bent out of shape, and that's
true. It's an old, beat up brush
and the bristles are bent out of shape.
And I'm using it specifically
for that reason. Normally
these brushes have a really fine tip
and they're really precise.
And sometimes when I do retouching, that's
really, really beneficial. Let's say
I'm retouching a very, very small
pinprick damage or a little
crack or something that needs a lot
of precision, that's what I want.
But in this case, I have a lot
of material to cover, a lot of paint to
apply, and the surface of
this painting isn't completely
flat and smooth.
What I mean by that is, if you look
at the forehead of
Anne, you'll notice that it's
not one color. It's lots
of little colors mixed in together.
And so, by taking
a brush that has bristles that are a little bit
beat up and askew
and not very
precise, as I lay down
the colors, they'll kind of
diffuse a little bit throughout the
area that I'm retouching. And that gives me
a better chance of matching
or blending in to the surrounding
areas. So, it's not
only a matter of choosing the right color,
but it's also a matter of choosing
how it gets applied to the surface
that will help disguise all
of this damage. And there have been
cases where I've used
large brushes and
sort of stippled
the retouching on the
surface. There have been times
when I've used airbrush to apply it on
a completely flat and
matte surface. And so,
in this case, this
is the best brush for the job.
Now, there's no trick
to doing this. It's a lot of trial and error. And you can
see that I'm mixing a color
and then changing it, and then going
back over, and then remixing,
and then changing, and then going back over,
rinse, repeat, lather,
rinse, repeat, so on and so forth.
Generally, retouching
skin tones and
white-ish colors or light-ish
colors are much easier than retouching
dark colors.
For some reason, they
just make more sense to me. I'm sure
other conservators, other people have different feelings.
So, I'm not terribly
daunted by the fact that this is a large
area of retouching right on the forehead.
Now, that being said, it
is a large area of retouching
right on the forehead.
The only thing that I could think of that would be
possibly worse is if one of her eyes
was missing, and I had
to recreate an eyeball that
wasn't there before.
Because I'm sure there would be a lot of opinions
about whether or not I
hit that one on the mark.
Anyhow,
I'm gonna work slowly, go through this,
make sure that I get
all of the colors right,
make sure that I get the texture right,
make sure that the volume of her forehead
looks appropriate,
and I may come back to this
the following day and
do a little bit more work, give myself
some space. Sometimes it's good to
take a little distance between retouching
when it's a large area like this.
You come back the next day and you realize that
you need to add a little
bit more white or yellow, or
maybe you just want to take it all off
and start over again.
I won't do that here, but I will
take advantage of some time to
get some distance and make sure
that I like how this looks before I
move on to the next steps.
And just like with the forehead, there are other
areas of this painting that have damage
that need to be retouched.
Now, retouching on
paintings like this is kind of
fun, even though I'd rather
not have the painting damaged.
Getting to work on really beautiful
paintings that are well-built and well-created
is nice, it's a real
pleasure. And getting to work on
paintings like this can also be really challenging,
because if you notice, this
skin tone has been kind of
created and blended on the canvas.
And that is, the artist painted this
while wet, and blended in
the kind of dark shadows
into that green, into that creamy
color, all on the canvas
while it was wet. And that's really hard
to retouch, because the paints that
I use dry really quickly,
and I can't really blend them on
the canvas like the artist can, so
I have to constantly be
changing the color of the retouching
paint, and applying it on top
of itself, and trying to
blend it in a little bit, but mostly
using lots and lots of little colors.
I guess it's kind of
like a low-res version of
a gradient. If you don't have
a billion colors at your disposal,
if you only have a thousand,
you have to dither that, and
that's kind of what I'm doing here.
Now this is really interesting
because I have to recreate this lace
work that was really beautifully painted,
but what's really fun about it
is that once I recreate
the lace, I then have to add some
dirt to it, make it look
like it's old, because of course if
I don't, it's going to look too bright,
too crisp, too clean, and
your eye is going to catch it. So
after I recreate the lace
and kind of get the base down,
I'll go back in with some
paint color that looks a little
dirty, and I'll kind of add
those touches to the paint so that
it looks like my retouching paint, which
is flat, has a texture, and
that some old dirt has
gotten stuck along the edges
or old varnish or something
like that. And so you can see
just by adding a little
bit of quote-unquote
dirt, it makes a big difference
in how your eye is going to read
this area of new retouching.
And so that's one of the things that's really kind
of fun, adding cracks to my retouching
or scratches or dirt.
It's just something that
you don't think of right away when you're trying to
make the damage disappear.
And now with
all of the retouching complete, I can varnish
the painting. And I'm
using a synthetic
resin varnish with an ultraviolet inhibitor
in it and a plasticizer so that
it's stable, it's archival, same
varnish I used in the beginning, and I'm
going to apply it via brush, and
you've seen me do this dozens
of times already. There's nothing terribly
exciting about how this varnish gets applied.
It's very easy, very
workable, and it's not terribly
difficult. I think one
of the reasons a lot of artists don't varnish their
paintings is that they're scared off by
applying a varnish, they don't know how,
they've never been taught, and
probably their first experiments
were unsuccessful, and so
they never do it again. But really,
it's pretty simple.
Now once I've applied this varnish,
I'm going to allow it to start to dry.
And then once it's reached a
level of tackiness that I'm happy with, I'm
going to take a badger hair brush
and I'm going to start brushing out
the varnish. Now I applied a
pretty glossy layer of varnish to this
painting's surface, but I want to
knock it down just a little bit.
And so as the varnish gets
really tacky, I can drag the
badger hair brush across the painting
in multiple ways.
On the x-axis, on the y-axis,
diagonally, and
what it's going to do is put
little micro abrasions into
that surface of the resin as
it dries. And that's going to give it
a real shimmery
effect. I'm not really sure how
I can explain it just with
words, but it takes a very flat
and smooth glossy
appearance and
makes it have a slight
texture. Now you're not going to see these lines,
but what you are going to see
is a really beautiful
velvety glossy surface.
So instead of being matte
or flat or plastic looking,
it's going to have this
crystal-y quality, which I
think is gorgeous.
And right when I thought that I was
complete, I noticed something that I had missed
earlier on in retouching. So I'll take the painting
back to the easel and I'll mix up
a little bit of paint and apply it
just where I saw the spot that
I had missed. Even on your best days,
you may miss something. And the ability
to go back in and rework
it is really a benefit.
So just
getting rid of that little dot makes a big
difference. And now the work
is all complete and I can wrap
up this painting. I'll put the backing board
back on. I'll recycle it
because there's no reason not to.
And once it's installed, I will mark
on my label what type of
isolation layer I used, what type of
retouching medium, and what type of
final varnish so that the next conservator
hopefully not me
will be able to identify those materials
and know what solvents
and approaches to use so that there's no
guesswork for them.
And here's where I'll show you the before and after,
how Anne came into the studio for the second
time, thanks to her cats, and how I'll
send her home. But I was
really happy that I could showcase with you
the difference between working with modern
archival, synthetic, and fully reversible
materials and approaches
compared to some of the old, antiquated
materials that I often come across,
and how that allows the conservation
to be better for the painting, for the artist,
and for the conservator.
And hopefully you'll understand
why I choose some of the approaches
and techniques a little bit better
in the context of reversibility
and how the next conservator's
job will be a little bit easier.
Anyhow, thanks for
watching. I hope you enjoyed it.
Subscribe, watch some more,
you know the drill.