A Sleeve Crinoline – Using 1890s Sleeve Magic

Victorian Threads
4 followers
4 Video Views·Aug 5, 2025
In this video, I delve into a smaller side project within my medieval outfit series: crafting a sleeve crinoline for my cycling sweaters. Inspired by a viewer's suggestion, I embarked on this endeavor to enhance the structure and wearability of these garments.
MATERIAL USED
*These are affiliate links.
1, 6m Black Popeline
3,9 m Metal Boning
14 Small Black Buttons
Black Cotton Sewing Thread
CONTENT
00:00 - Intro
01:57 - The Mock-up
03:50 - The Fabric
06:27 - Sewing the Bodice
09:04 - Solving the Boning Issue
13:42 - Sewing the Sleeve Crinoline
17:35 - Finishing Touches
18:27 - The Reveal
19:47 - Thoughts and Conclusion
This video is about a smaller side project amidst all the pieces I'm creating for the
medieval outfit.
When I was sick back in December I picked up my knitting project again which I hadn't
touched in a year or so and it's again a cycling sweater because I really like the silhouette.
However it also made me wonder why I hardly ever wear the two sweaters I've already made.
The answer is quite simple.
I don't like how the shoulder section is drooping off the shoulders and the weight
of the sleeves are pulling them down.
I just think it's not that flattering.
But luckily Roxanne Ash 1491 suggested in a comment on my video about my green cycling
sweater to look for sleeve crinolines and this set this project into motion.
At first I just wanted to create a support structure for the sleeves.
However I realized that the sleeves of the cycling sweaters are quite heavy, obviously,
and I need something to keep the structure in place so that it doesn't get pressed down
by the weight.
Back then sleeve crinolines were either tied to the underwear with ribbons or held in place
with elastic bands on the arm.
Currently I don't have suitable undergarments to tie the sleeves to and I believe the sleeves
are simply too heavy for an attachment with an elastic band.
So I decided to additionally sew a corset cover to which I can attach the sleeve crinolines.
This way I have essentially had two flies with one swat.
I think this saying is different in English.
Anyway, this way I will add another important garment to my Victorian Edwardian wardrobe
and I hopefully will also wear the sweaters more often.
I delved into my collection of old patterns and stumbled upon a gem from 1907.
I'm really happy how this mock-up turned out.
I am now really pleased with the fit.
Only the sleeves are a little bit wonky still.
This side because I haven't changed the shoulder it's a little bit too wide and this side because
I tried to set in some boning to test if it works and well it does.
The thing I was most worried about was if it annoys me if there are the three boning
channels right under the arm but I don't even feel it so that works but since I used this
zip ties and they weren't long enough to go around the sleeve the whole time so I had
to put them together and this creates this massive bulk thingy and that's why they look
extremely wonky and don't want to stay straight or round.
So I can't really see how it would look with proper boning but at least two things I've
tested.
The other thing is that I now know that I actually can run one boning channel up here
so that it had some structure in the height and then two which are going in the width
and I will probably add a fourth one down here and then gathering everything in our
cuff.
So I think the next step is to redraft the pattern, make every adjustment I made on the
mock-up to the pattern too and then I can start with the actual garment which I'm really
really excited to do.
The pattern was written on the executive model on shirting so the shirting refers to probably
fabric that is used for shirts so popeline is one option of that so I used that.
When cutting out I made sure that there are those triangular additions to the seam allowance
where the darts are so that they will fold in later closely and I can sew them into the
hem.
I marked every piece with tailor's chalk for precision later.
I cut off the facing I planned for the detachable sleeves of the paper pattern and then traced
them onto the fabric.
So I did this little poll over on Instagram and the YouTube community tab and asked you
which color I should choose for this corset cover and once I saw the result I definitely
knew which color I wanted to do and it's black so as you saw me just cutting out the
black fabric but most of you were saying I should make it in white so I bought a white
fabric too and I will make it in white but slightly different I won't make the same garment
I will make some adjustments I'm really curious how this goes and how different it would look
I'm still using the same patterns just making it shorter changing sleeves I will make two
garments out of one pattern I think that's the idea right now there we have all the pieces
ones in white and ones in black but the white version will be made in its own video because
I had the idea for something little extra.
Threading my antiques machine just brings me so much joy much more than with my modern
machine which isn't quite logical but anyways.
Once it was all set up I closed all the seams and sewed in the darts this is how the bobbin
spins down there just if you wondered how it looks.
Closing the dart usually you would do them the other way around but I didn't and it worked
fine but in future I think I will do it the right way around.
After I had sewn all the seams I ironed them flat and open and also made sure that they
all face towards the back then I cut the seam allowance all to one length and I tried to
assemble the facing just to discover that I had sewn them together the wrong way so
I disassembled and reassembled them.
Then I could put them together and sew them at the outer edge together so that when I
turn it around the edge where I'd have to sew in the sleeves are still open.
I trimmed all the seam allowance which will be hidden in the hem or between the facing
with a zigzag scissor so that they are less visible later.
Then I sewed the front facing for the buttonholes to the fabric one side which will be on top
was sewn on the front and the other side to the back I just thought it would look better.
While sewing the hem I made sure again that the seam allowance all face towards the back
to have consistency.
I closed the neckline with a small hem too, here I had to make it really narrow in order
to accommodate this rounding and have less wrinkles.
I secured all the seam allowance with a whip stitch by hand which as always took quite
some time.
I was waiting for the boning because I bought some which are flexible in the horizontal
so not just a shoulder.
So this boning is flexible in two dimensions in this one and also in this one which I need
for the pattern of the sleeves since the boning I made there in my test runs first
one runs straight but the second one for example has this curvature and with this I can go
along it.
So that's my plan I hope I can just make it bend enough that it still stays flat but
conforms the sleeves the way I want it.
So that's what I'm going to try now.
In comparison the plastic boning can be bent in this direction absolutely not in this direction
and that's why I bought the metal one so that I hopefully can do what I want to do.
The only disadvantage is that this is heavier than this obviously because that's metal.
I spent the last couple of hours thinking about how to make the sleeves and one thing
that bothers me is that I wanted to make them detachable so that it can wear this top just
like a top without the crinolines and the sleeves but I made a simulation of that and
I just don't like how it turns out it's way too bulky it just doesn't look good.
The idea was to add buttons to this and then put it underneath like so and then here in
the fabric there would be buttonholes so that I can attach it like so and the sleeves would
be sewn in here but yeah as I said it looks bulky it looks not right.
I think the fabric is also too thin to make this really work and look good.
So I think I just will sew in the sleeves.
The other part that bothers me is the boning of the sleeve and there I made some changes
too in order to make it hopefully work better.
Okay I have this mock-up where I have set in the zip ties like this and I think that
works quite well but I first thought I will make some strips of fabric and sew them on
as boning casings but since there are curves in that I figure they will wrinkle and I don't
want that.
So I thought it might be smarter if I just make the sleeve double layered so that I just
treat this like one sleeve make the seam them together where the bonings will run through
and then I have a slightly more structured sleeve and I don't have the problem with the
wrinkles.
I just have to figure out how to end the areas where the bonings will end like so what I
do here in order to not let it break through.
Yeah so that is the change so I have to recut two pieces for the sleeves but I think that's
the best solution I hope at least it is we will see.
I transferred the lines of the boning to the paper pattern making sure that the curves
are smooth and symmetric.
Then I cut along the line so I can mark it to the fabric.
Once these were marked I sewed along the lines and luckily my sewing foot is exactly as wide
as the boning channels need to be so I just could set another line right next to it and
I had my boning channels.
In order to get the boning into the channels I secured the metal cap on the top and then
pushed it into the channel.
This was quite fiddly because the channels are really tight which I wanted but also the
cap sometimes got loose and I had to fill it back in but in the end it worked.
The other side I had already sewn shut with one single seam line so that when I get there
I can put tension onto the boning and make it all really flat so that I know exactly
how long the boning has to be and can cut it off.
My pincers weren't strong enough so I had to move the boning until it breaks.
For future projects I would buy a better pincer I guess.
Before sewing the sleeve together I made two lines of very wide stitches as the sleeve
cap and at the hemline of the sleeves in order to gather it later.
Once the boning channels were set in I was thinking about the fact that they might break
through the fabric because of the tension and what is done with corsets is adding some
flossing at the ends so I did that too.
It was a really simple flossing just crossing six threads at the ends and I think that makes
it way more stable.
And once that was done I sewed the sleeve together by hand since it was so difficult
to do that with the machine with all the boning and I was just way more precise to do it by
hand.
Once that was done I could turn the sleeve around and it looks quite good.
Once the sleeve was sewn together I gathered the top and sewed the sleeves into the armhole
making sure not to hit the boning which was actually quite simple since I had planned
for that.
Then I sewed a strip of fabric to the bottom of the sleeve in order to form a cuff.
This one I sewed on one side by the machine and then felt the other side by hand to close
it around the raw edge.
And once the sleeves were completely finished there was only one thing left and that is
marking the placing of the buttons.
I chose a bunch of tiny black buttons which are maybe too much but I just liked how it
looks.
I marked the placing with pins and then sewed the buttonholes with my modern machine which
just goes way faster than by hand.
And then I sewed on the buttons.
And that's it.
The sleeve crinoline is done.
Here is a tiny little detail I made at the sleeves.
It's just a tiny flossing right at the middle of the sleeves because the others you will
never see.
This one neither but I just wanted to make it.
Let me tell you I couldn't help but chuckle at those sleeves.
They look absolutely ridiculous and I hope in the best way possible.
Let's see if it actually fits well and works.
I think it just looks ridiculous but let's see how it works underneath the cycling sweater.
Putting it on is quite difficult.
I get now why they made the sleeves detachable.
I think it is easier to put them into the sleeves and then putting the whole garment
in one step on rather than pulling the sleeves over the support.
But anyways it works.
You just hope my next project.
Since honestly I can't work on a modern coat anymore.
I need room for those sleeves.
So either I'm going out like this and that's too cold right now or I'm going to make a
coat.
But this will take a while so maybe I will plan that for next winter.
But anyways I'm pretty happy with how this turned out and it's so much more comfy than
I expected it to be.
I basically can't feel the boning, the structure.
Maybe this one is a little bit not wide enough but this one definitely helps and I think
it's just looking so cool.
Maybe.
I don't know.
They are just really exaggerated.
That's so crazy.
But anyways.
Mission accomplished.
I guess.
Thanks for joining me on this journey and let me know if you think it's too much of
a sleeve.
