http://www.jayscustomcreations.com In video 091 I made a mini picnic table condiment holder that received a good response from the folks on LumberJocks. So, I decided to take the project a step further and designed a condiment holder sitting bench in SketchUp. This is essentially a scaled down version of my 48" sitting benches but will be able to hold ketchup, mustard, salt, pepper, napkins, plates, knives, forks, and spoons. This is a video covering the build in Google SketchUp.
my last project was a mini picnic table
condiment holder it was a small scale
down picnic table with a ketchup and
mustard bottle uh holder and I got some
pretty good responses from that so I
decided to make something a little bit
bigger and this is not that much bigger
this is I think it's 20 in wide yeah
it's a scal down version of my sitting
benches that are normally 48 in wide um
what this is going to allow me to do is
create a ketchup mustard uh salt and
pepper holder a little container for
some napkins and this area in the back I
can close off and make uh you know
something like you have your paper
plates in the middle and maybe some uh
spoons and forks on one side and knives
on the other uh basically all your
little picnic condiments allinone and it
looks like a little sitting bench so
anyway just stick around and I'll show
you how I whip this together real quick
and sketch up all right I'm going to
start on this bench with the legs so R
for rectangle and I'm going to go up
7.25 in with a width of 1.5 in all of my
pieces on this bench are 1 and 12 in
wide and they all are 05 in thick so I
can use my protractor here to create
whoops create a miter on both top and
bottom that is 50
15° Alpha line connecting to the Dots
here select this one and delete it now
using a window and not a Crossing I'm
going to select just the angled line
here if you use if if you start
selecting stuff from left to right that
is a window anything inside this
rectangle will be selected and from
right here it's just that little
vertical uh little little angled line
these vertical lines will not be
selected because they are not 100%
inside the window now if you go from
right to left that's a Crossing anything
that crosses the area or the perimeter
of this rectangle will be selected which
is basically everything minus this
little line down here so using a window
select it m for move control brings up
your addition sign we want to add
another piece not take the original and
add it down there space bar Crossing
delete that delete that that's our shape
P for pull this direction 0.5 in space
bar triple click G for component enter
so that's the leg we need to rotate the
leg from here
15° so that's what we're going to be
seeing now like I said all my pieces are
1 and a half inches thick so let's start
working on these horizontal pie pieces
I'm sorry one and a half inches wide so
the first horizontal piece is 1.5 in L
for line we're going to start drawing it
this way and we're going to go this
direction of
9.375 and now I need an an adjacent 15
Dee line so I will use my
protractor going over to the red FL red
uh plane if I move my mouse see it it no
longer stays in the red so if I go over
here hold shift it
stays all right so off of vertical I
need to go 15 in or degrees
and use my L command to finish drawing
this particular piece select this delete
delete P for pull this direction 05 in
space bar Tri will click G for component
enter so that's my
piece now I need a symmetrical leg on
this side going down here so the easiest
way for me to do this is just use the uh
rotate command there's several different
things you can do here but let's select
our leg first first then rotate off of
this midpoint because it is symmetrical
starting over here we will control for
an addition rotate this one over to here
now it is inside this leg but that's
fine because we can use M for move and
move it back there now there's both of
our legs top horizontal piece we need to
bring in the bottom horizontal piece so
M for move select this down the blue
axis and press the control button for an
addition so we'll drop it right there
now they're buted up against each other
we need to drop it
another 1.5 in on the blue axis that
gives a spacing of
1.5 now to move this over to here uh
let's just click this M from this point
along the green axis and stoping that
edge now these two pieces are identical
pieces because this is obviously a copy
so whatever I do to this is going to be
modified up here and I don't don't want
that so I want to right click and say
you are unique you are no longer a copy
so now anything I do to this will not be
done up here double click to edit the
part P for pull and as you can see that
is the wrong method if I just pull this
face my bad instead we need to use a
window to select that face that's more
like it um for move and we need to move
this face along this Edge up to this
plane so we just select it and if you
see the green axis is highlighted I can
move this all over the place but I want
to stay on the green axis and if you are
on the green axis as it's highlighted
you can press the shift button hold it
down and you see it highlights
it and that means no matter what you're
going to stay on that axis so I can use
my mouse to reference off of all kinds
of different stuff but I'm still on the
green axis so long as shift is held
so I want to reference off of this plane
and drop it right there so there's my
pieces uh that's the frame of the leg I
should say I also need a back support
over here and it is mitered on bottom so
it's flush with this and it's 15 degrees
backwards over here easiest way for me
to do that is to just copy one of these
legs never draw anything that you can
copy you save so much time that way M
for move control for copy or addition
and I want to copy this one down to here
now I want to move this one from this
point all the way to the
back so there you go now I just need my
distance which is I think it was 12 and
a half inches so like I said we need to
right click and make this one
unique let's make a line from right here
on top of this piece and we're going to
go a distance of what I say
12.5 that sounds right so we're way up
here
now we will double click to enter this
piece and window to select this face M
for move let's move it all the way up to
the top of this
line get out of that select our line and
delete it so it's no longer
there now this piece is not mitered on
this end it's just a straight cut so
double click to get back into the enter
alha line and that is a perpendicular
line so P for pole Push Pull I should
say and remove that little bit so there
we go now that's one leg assembly
done I need to make another leg
assembly so let's go for T tape measure
and this is a distance of what was
that I've already done this and wrote
down the dimensions so this is 17
inch there we go now select all of this
with a Crossing M for move control for
addition or copy whatever you want to
call it drop it off on that line now
it's it's in the right spot but it's in
the wrong orientation we need to right
click and flip every bit of this along
the red axis there you go the red
Direction and we can move it from this
point where it needs to be on that
line select that and now this inside
face is 17 in away from this inside face
so what we can
do is we need to make a slat that goes
across a little brace that is flush with
this face here so I'm just going to make
a little line going up this piece 1.5 in
L for line and I'll just uh Connect the
Dots here sometimes when you're working
with angled faces like this your uh
rectangle command acts a little bit
funny so the thickness of this piece
is05 in and we're going to go all the
way over
to this face let's delete this little
line over here triple click G for
component enter so now we've got the
legs
connected now let's work on a slat and
arpha rectangle from this point all the
way over here my Dimensions say that is
19 in wide and I need to be one and a
half thick or 19 inches long and I need
to be one and a half inches wide so 19
comma 1.5 enter P for pole thickness of
this slot is 0.5 in and I want an
overhang .5 in from that
side and5 Ines that side space bar
triple click G for component
enter now I want to move this all the
way to the back I always start from this
vertex and move forward and up when I'm
building these so M for
move and I will start come here now
right there
and I will go right
there so that's the first slap I need to
add four more to that to come out to the
front and and if you're building an
actual bench that you're going to sit on
you typically want some Gap in between
the slats so that water can run off uh
this is going to be smaller I don't want
the Gap and I'm also going to put a
piece of plywood on the bottom to kind
of hold everything together so just
going to but everything together and M
for move control brings up your plus
sign from this point to there and my
last command I can just hit
X4 enter and that multiplied my copy
times four in the same direction so very
handy little feature there now I want to
add a little plywood panel on bottom
like I said so R for rectangle I'm going
to go from this point over to here is 17
in what looks good uh let's just go 7
comma
6.5 P for pull yeah that looks good .25
quarter inch panel triple click G for
component
enter now I need to copy these this
direction so easiest way to do that use
a
Crossing rotate from this
point and press control brings up the
plus sign
and I need to go 105° as you can see in
the bottom right
corner now it is not touching the back
so we need to move
everything M for move from this face in
the green Direction hold shift that way
we focus on the green Direction but I
want to stop
on intersector
plane and that looks good up there so
there you go this is the little mini
bench that we just built and uh now you
can start cutting stuff out and adding
whatever you need to
add all right so I took a little break
to grav a bite to eat but now I'm ready
to add the condiment holders and just
for the sake of making things a little
easy I'm just going to hide this plywood
panel uh it will be there in the final
design but uh it makes the sketch up
just a little bit easier now I need to
add a ketchup bottle mustard bottle salt
and pepper some napkins and some stuff
on the back so I'm going to start on
this particular plane this top plane
considering that uh that's where the
bottles are going to be and I'll just
use this point as reference and I'm
going to draw a half of the figure and
then revolve it and I'll show you what
I'm doing real quick L for line I will
go over 1.125 because my diameter is 2
and A2 or 2.25 rather I will come up on
the blue axis 6
in and just to make this look like a
ketchup and mustard
bottle and see how it snapping to my
bottom point right there that's what I
want so something like that not an exact
science here but that's the half of the
profile of the ketchup and mustard
bottle so I will go see for
Circle and just make a little circle
down here at the
bottom delete it and I will use my
follow me command this is my PA whoops
this is my path follow that path what do
I want to follow I want this to follow
that
path there you go triple click G for
component enter so I will move this one
back
here and something like that I We'll add
another one
something like that that looks good next
one is my salt and pepper and they are
only 1 and a 12 Ines in diameter so 3/4
inch for radius P for pole and let's go
3.5
in that is my Salt and Pepper G for
component M for move
control something like that
yeah I'll select this one and I'll move
it like
so on the green
axis like so now let's make this just a
little bit more realistic
so
let's select
everything minus so we'll hold shift
button minus this minus this this and
this so we're selecting the
bench what in the world's going going on
selecting the bench
and let's just go with that color yeah
there's a pine
bench now I want to select the mustard
make it
yellow I want to make what in the world
want to make my
ketchup and salt will
stay let's try this side see if my
computer likes that salt will say pepper
will be pepper that's pretty
obvious now how do we cut the holes in
SketchUp to line up absolutely perfect
with that so let's select all of these
real quick and it does clear over here
but I want it a little bit more room so
let's move it all along the red axis
something like that that's fine maybe a
t
more now I want to just plunge it right
in the surface
[Music]
and
maybe I guess one and a half inches will
be
fine now to get these marked out nice
and perfect there's a NE neat little
feature in SketchUp but first these are
all copies so select all these and make
every one of them unique from the next
to verify I can click on one of these
and actually I may have to do it to
everyone
yeah Mak all right so I need to transfer
these marks to cut the
hole what I can do is open up this piece
and I can go right click and
intersecting faces intersect faces with
the model this is part of the model so
if I intersect faces it's going to draw
my little
lines go to the next one inter faces
with model go to the next one intersect
faces with model go to the next one
intersect faces with model now if I
select my
condiments hide them I've got some
holes open up this one p for
pull let's get rid of all of that let's
get rid of all
that got a little sliver right here
there's bad aligning on my behalf but we
can and go ahead and remove
them move this down to this point move
this face down to that
point going to the next one remove P for
pull we're going
to pull all of this material
down and now we have some perfect
holes so edit unhide
all they are sitting in perfect holes
and I still need to hide this
Plywood And to support them let's just
do this let's make a
rectangle that
is something like that so we'll go 0.5
by 6
six it looks good pull it down
1.5 minus the thickness of the slats so
was only one inch that's
right and let's M for actually triple
click G for component M for move make
another
one along the red axis if I can find it
there you
go and let's just go along the red
axis just go six and a half 6.5
enter r a
rectangle now we have a little tray and
this will just be P for pull a25 in
piece of quarter inch
plywood triple clicks G for ENT
component there we
go now we have a little
tray oh let's see this is also
yellow there we
go now over here we've got some napkins
and they
were I'll just use this face as a
reference they were
6.5 by
6.5 there we go well if I could just get
there we go M for move let's move this
up yeah that looks all right for
napkins move it up
over and we have a thickness of let's go
with 4 in of
napkins Tri click and for move move it
back a little bit make sure I'm not
hitting anything
else and we can do the same thing for
the napkins except I have mine going
front to back so I need to do it on this
face
6.5 by .5 enter P for pull down to
this
whoops space bar triple click G for
component M for move copy this one into
the back make sure it's not interfering
with
anything and I can make another one on
the bottom that plywood panel pull down
0.25 Enter space bar triple click G for
component
enter uh that may seem a little
confusing uh I should have said that
earlier but you get used to just mashing
the commands
quickly
so back into my
color and that's part of the bench my
napkins the napkins that I am using are
bright red
so there we go we need also need to make
these intersecting faces
with
model intersect faces with model
intersect
faces so now I can hide
this and this is where the plywood panel
that I have previously hidden comes in
handy because once I cut this off and
this off then this little piece right
here would be floating so the polywood
panel will hold it all in place but for
this demonstration it is obviously not
involved
remove back up I don't know what
happened
there there we
go all right so
now edit
unhide all
there a little condiment holders now I'm
probably going to make this one flip the
other direction 90 de so you have the
same reveal as you would uh right
there but also in the back I am just
going to take these little guys
and make a little half lap I guess let's
go with5 for the thickness
and 1.5 here so
I can make my two
lines and remove that material should
have done it on the next one see it it
updated this one over here because they
are
copies now I
can make my little piece
in like I said earlier if you're on some
angled faces your rectangle command man
wants to act up occasionally so let's
just go ahead
and draw this in
place come on what is going
on L for line let's see if I can get
this this
time there we
go something like that
and maybe
Also let's
see I'll use my line command to
make another little
slat that is half inches
thick component and I will move it right
down
[Music]
down this line something like that that
way we have a little basket I guess you
could put your stuff in the back your
paper plates and
some uh you know spoons and forks on one
side knives and the other whatever you
need uh up front we've
got a block of napkins salt and pepper
ketchup and mustard um you know it's
probably going to look a little bit
better than this I just took some rough
measurements and I'll probably find T
tune uh all my condiment sizes and maybe
do a little bit better concealing down
here but the bench itself is the exact
size of what we're going to be working
with and like I said I'll be making this
in probably two weeks I've got some
other stuff to do but I wanted to go
ahead and knock out the design uh if you
like what you see like And subscribe and
thanks for watching