J. J. THOMSON EXPERIMENT (Charge to Mass Ratio for Electron) || for Class 11 ⧸ 12 in HINDI
Today we are going to talk about an experiment
in which J. J. Thomson
found out the ratio of charge and mass of an electron.
So the charge of an electron is e and its mass is m.
He found out the ratio of these two.
This is 1.75882 into 10 to the power 11 coulomb per kilogram.
So let's see what this experiment was.
And how did he calculate this value?
So this setup here is like a glass tube.
It is a glass container.
Gas has been kept at a very low pressure here.
The gas has been removed from the vacuum pump.
Its pressure has been reduced.
Here you will see two plates.
One plate is this one.
And the other plate is this one.
There is a hole in the middle here.
Why? You will understand later.
These two plates were connected to a high voltage power source.
So by connecting them to a high voltage power source,
a lot of positive charge came here.
This went into a lot of positive potential.
And this went into negative potential.
So as this voltage increased,
when the voltage increased a lot,
it was seen that the discharge of the electron started from here.
So the electron came out of the cathode.
And it moved forward while being attracted to the anode.
This anode is positively charged.
And this cathode is negatively charged.
If you look at its path,
the electron that comes out straight like this,
will come out of this hole.
A lot of electrons will be absorbed here.
And some electrons will come out of this hole.
And while coming out,
this surface here,
which is a fluorescent screen,
will collide here.
To understand where it is colliding,
you will see some glue here.
If an electron collides with a fluorescent screen,
then it glues something.
So from here you will understand
where the electron is colliding.
So its path was like this.
It came from here
and came out straight.
We will talk about the rest later.
So it is colliding here.
Now see,
this plate and this plate,
both of them are connected to the battery.
An electric field was created here too.
How was it connected to the battery?
It was connected to the positive terminal.
And this plate was connected to the negative terminal.
How was it connected?
It was connected like this.
The wire was taken out from here.
And from here,
this positive terminal and this negative terminal
were connected to the battery like this.
So the obvious thing is that
the electron, which is a negatively charged particle,
whose path is this,
will now be deflected.
So this is positive and this is negative.
How will the electric field form?
From the positive side to the negative side.
And we know that the electron is a negatively charged body,
so its deflection will be upwards.
So its deflection will be something like this.
And from here,
it will come out straight like this
and hit the screen.
Where is it hitting?
You can easily understand this.
It will hit where there is glow.
So with this glow,
we understood where the electron hit.
Now where it hit,
if we backtrack from there,
it is very easy to see how much its deflection was.
From here,
the path that it is changing,
how much it deviated,
can be calculated very easily.
So this distance,
if we call it y,
it is measurable.
And since the electric field is also provided by the experimenter,
the magnitude of the electric field will also be known.
So the magnitude of this electric field will be known.
Now what has been done?
Now a magnetic field has been introduced here.
A magnet has been introduced here.
This is the North Pole
and this is the South Pole of the magnet.
See, there is a mistake in NCRT here.
The South Pole is written here,
and the North Pole is written here.
The kind of deflection that should be there,
has been told to be the opposite.
So that is a mistake.
Let's move ahead.
Now a magnetic field has been introduced
through an electromagnet.
So first,
if the strength of the magnetic field is less,
then see,
by Fleming's left-hand rule,
we can say that
if there is an electron here,
on which a force was being applied upwards,
which was due to the electric field,
which will be the charge of the electron,
if it is E,
and if the magnitude of the electric field is capital E,
then this force was being applied upwards.
Let's just consider the magnitude.
E into E.
This force was being applied upwards.
Now a magnetic field has been introduced here.
Let's look at the magnetic field once.
From the North Pole to the South Pole,
we will see magnetic field lines like this.
I mean,
such magnetic field lines will be formed.
So because of this,
the force that will be applied,
from Fleming's left-hand rule,
we can easily find out
that this electron is a negatively charged body,
so the force will be applied downwards.
This will reduce the deflection a little.
So now the deflection that we saw,
will appear to be a little less deflection.
Now if the strength of the magnetic field is increased,
the deflection will be reduced even more.
The deflection will be something like this.
The strength of the magnetic field has been increased
until the propagation of this electron
becomes something like this,
that it hits this fluorescent screen directly.
So now it has hit here.
So the magnetic field that has been set now,
because this is being set experimentally,
so the strength of the magnetic field
has also become known.
Its magnitude is also known.
What is the situation now?
Now the electron came out of here,
crossed the hole,
and is hitting this screen by propagating directly.
There is no deviation at all.
What does this mean?
This means that the electron here,
on which so much force is being applied
and because of the magnetic field,
force is being applied downwards.
Because of the electric field,
the force on the upper side
and because of the magnetic field,
the force on the lower side,
the magnitude of these two will be equal.
That is why there is no deflection.
The two forces will cancel each other.
Here the force that is created
in the magnetic field,
the force applied on the moving charge,
because the motion of the charge
is perpendicular to the magnetic field,
so we can easily say
that this force will be
the charge that is moving
multiplied by the velocity
multiplied by the magnetic field strength.
So now what happened?
These two are exactly equal to each other.
So E is equal to EVB.
So from here you can say
that E is equal to VB.
So for V,
to find the magnitude of its velocity,
V is equal to E divided by B.
This is an important relation
that we are going to use later on.
Now from here,
if you track the path of this electron,
what is this?
This is the upper plate
and this is the lower plate.
If you track the motion of this electron
from here,
like the deflection
due to the existence of the electric field,
if you track it from here,
you will find that its path was something like this.
We have found the velocity of the electron.
We have found the velocity of the electron here.
Now in the previous case,
when there was no magnetic field,
in that case the path of the electron
that we traced,
the path was something like this.
We also talked about the distance
from here to here.
We can find this distance.
We have named this distance as Y.
And the length of this plate
is named as X.
That means it will look like this here.
We have found the velocity of the electron.
We have found the velocity of the electron
when it is entering the plate.
Its velocity will be V,
which we have found here.
Now from here,
the direction of the velocity of this electron
when it is entering the plate,
its initial velocity is along the X axis.
That means it does not have any Y component yet.
You will see this situation in projectile motion.
If you are an 11th grade student,
then you may be studying projectile motion.
And if you have studied projectile motion,
then it will be very easy for you to understand.
I will put a link to a basic video in the description.
You can get a basic idea about projectile motion
by watching this video.
There is only one component here,
which is along the X axis.
If it takes time to reach from here to here,
then we can say that
this X will be equal to Vt.
Because X is the distance from here to here.
Its velocity in the X component is V.
So in the time T,
it will travel this much distance
with the magnitude of V
which will be equal to X.
Now look,
its Y component is 0.
But what happens in the time T?
In the time T,
this Y distance travels upwards.
Why?
Because a force is being applied towards the top,
which is ee.
This force is being applied towards the top.
This is the force,
which is equal to ee.
Because of this force,
an acceleration is being created towards the top.
The acceleration,
whose magnitude will be equal to
the magnitude of the force
divided by the mass of the particle.
So this will be equal to
ee divided by m.
What is this?
This is the acceleration towards the top.
Because initially,
there was no speed towards the top.
It was 0.
So from here,
we can make an equation.
The Y,
which is the distance travelled
in the direction of the Y axis,
will be equal to
half into
the acceleration created towards the top,
which is ee
into T squared.
The initial velocity was not included here
because the initial velocity is 0.
If it was not 0,
then the initial velocity,
which is 0 here,
in the direction of the Y axis
into T.
So we include this
if the initial velocity is along the Y axis.
But it is not.
Whatever the velocity is,
it is along the X axis initially.
So now,
from here,
you can see
that the value of Y is known.
Here,
the value of A,
which is this,
is substituted here.
So from here,
we can say
Y is equal to
half into
instead of A,
ee
divided by m.
See, ee divided by m.
We got a ratio.
Into T squared.
Now,
you will get the value of T from here.
You will get the value of T from here.
T is equal to
X divided by V.
Now,
this value,
X divided by V,
if you substitute instead of T,
what will you get?
So from here,
we will say
that Y,
which is a known term,
X is also a known term.
What is X?
Its thickness
or length
is known.
So,
Y is equal to
half
into
ee
divided by m
into
capital E,
the magnitude of the electric field.
This is also known.
Only these two are unknown.
Into T squared.
Now,
instead of T,
we will write X divided by V.
So,
instead of T squared,
X squared
divided by V squared.
Here,
X is also known.
And V is also known.
Why?
Because
the value of V is this.
E is known.
B is known.
So,
all are known terms.
Only this is unknown.
So,
it is obvious.
We can find this out.
So,
from here,
what will we get?
So,
ee
divided by m
is equal to
For this value,
we will multiply
2 with Y
and V squared
and divide
ee
into
X squared.
This term
will go to the denominator.
Y divided by
will become.
So,
this will become
Y
into
2V squared
divided by
ee
X squared.
Here,
all the terms
are known.
Instead of V,
we have to put
So,
as soon as we
put that value
instead of V,
what will we get?
Let's write 2 first.
2 into Y
instead of V squared
ee squared
divided by
V squared.
So,
this will become
this V squared
and
in the denominator
ee X squared.
So,
ee
X squared.
From here,
the denominator
ee
will cancel
the numerator
ee.
And,
as a final expression,
we will have
ee
divided by
m is equal to
2
Y
ee
divided by
X squared
V squared.
All the terms
are known.
All the terms
are known.
All the values
here
are substituted
and
Thompson got
that
ee
divided by
m
is equal to
this.
So,
I hope
this video
was helpful
for you.
In the next
videos,
we will talk
about
many other
topics.
See you
in the next
video.
Until then,
goodbye.

