Determination of Charge to the Mass Ratio of Electron by J J Thomson Method - Structure of Atom
Hello friends, in the previous topic we have discussed about the properties of the cathode
rays as well as we have also discussed about the factors depending upon the deviation of
the cathode rays.
So, in that case we have got to know that is the cathode rays has a constant charge
to the mass ratio.
So, what is this charge to the mass ratio?
So, this is what we are going to talk about.
Let us understand this topic very clearly.
So, friends in this topic let us understand how JJ Thomason have determined the charge
to the mass ratio.
So, let us understand this topic.
We also know that is the cathode ray particles or any charged particles they have an influence
of the electric as well as the magnetic field and that's the reason because of which the
deviation happens.
Not only that but obviously depending upon the mass of the charged particle and this
all were the factors that is what we have discussed in the previous topic.
So, based on those factors let us understand the particular experiment so that we could
get to know that is how JJ Thomason have determined the value of E by Me ratio.
So, let us do this one.
So, friends this is a representation of a small setup from which JJ Thomason have determined
the value of E by Me.
So, here basically you can see that is there is a cathode that is been present over here
that is anode which is basically powered supply with high voltage and that is how basically
there are two fields that is these are the two plates that is positive and negative plate
which obviously they are helpful for the electric field induction and this is nothing but the
magnet which will produce that is magnetic field.
Suppose if the external forces that is the electric field and the magnetic field the
both are not present and in the absence of that obviously the cathode rays we understand
about the property of it that is it travels in a straight path from cathode to anode.
So, that is how basically the cathode ray it will be passed in a straight direction
and it will hit the tube and that is how basically this tube is made up of that is ZNS screen
and that is the reason this part that is the point Y it will try to go.
So, this happens when the cathode rays travel in absence of external field and that is how
basically here that is at point Y we will get the glow.
But what happens if we turn on the electric field and we will switch off the magnetic field.
So, in that case basically we understand that is the cathode that is the cathode rays are
nothing but the electrons and obviously whenever they will pass through this tube whenever
the electrons will come over here obviously there will that is they will try to attract
with the positive charge plate and that is how basically the cathode rays in spite of
traveling in a straight direction they will deviate a bit and it will hit the point X
and this point X it will glow.
So, this also shows the factors that are depending on the deviation of the cathode rays.
So, this is one of the point that is what we have discussed that is the electrical field.
So, this is how basically we will get a glow at point X.
Suppose in the another study we turn off this electric field and we turn on this magnetic
field.
So, in that case whenever the cathode ray is basically passed through this tube we could
find that is the cathode ray that is the electrons it will deviate and it will hit the point
Z and here basically there will be glow.
So, therefore we could get three glows at three different experiments or three different
study that is in absence of the electric and magnetic field we could find the glow on the
Y point in presence of the electric field we could get the point on X point and in presence
of the magnetic field we could get the glow on this Z point.
But we also understand that is this deviation it depends upon the mass of the particle also.
So, based on all these factors J.J.
Thompson what he did is he tried to compensate in such a manner that is in presence of an
electric field as well as in presence of an magnetic field.
So, that the deviation should not happen and by controlling this electric field and magnetic
field he made that is the deviation should not be there and that is the reason the cathode
ray should hit the point Y in presence of electric field as well as the magnetic field
and from which he have calculated the E by M ratio of which is also known as charge to
the mass ratio which was found to be 1.75 into 10 raise to 11 Coulomb per kg.
So, this is how basically J.J.
Thompson have determined the value of charge to the mass ratio and that's it.
Thank you friends for watching this video.
I hope you have understood this video very clearly and I hope I will see you next time.
Till then don't forget to subscribe E-Kida channel.
Thank you so much.

