hey folks are you guys doing hope you're
all having a great day today this is
gonna be part 2 in the shop series this
new shop series and focusing on getting
all the tools to this location and I
think it's kind of interesting because
number one I did not hire a moving
company there was just no tractor
trailer access to both locations really
and number two I did not use a box truck
with a lift gate to move all this stuff
that's what I was trying to trying to
find but there was not a rentable
situation within a reasonable driving
distance so we had to get a little bit
of ingenuity going with the 7 by 8 7 by
16 trailer that I have from my truck so
I also contemplated not record or not
documenting this process at all because
I simply wanted to be moved but so many
of you out there expressed interest so I
compromised and instead of recording I
just took a bunch of pictures there's
absolutely no way with the heat with the
humidity and with the sporadic rain that
I was just going to keep moving a camera
around and recording the process so
instead I hope I hope that you accept my
compromise here and I'll just walk you
through a bunch of pictures that I took
with my cell phones throughout the
entire process so that's what the rest
of this video is it's a narration of
moving all of the old shop to this shop
to move everything the plan was to use
my 7 by 16 trailer and to rent a 20 foot
u-haul box truck we were pleasantly
surprised that both the trailer gate and
the box truck loading ramp were able to
rest on our front porch and that just
made loading all the house stuff
including all of my office extremely
easy no steps to deal with all the house
stuff got moved before anything in the
shop and this means the first items to
get into the empty shop was all of my
office that night I temporarily set up
the office on one wall with multiple
trips back and forth we moved the entire
house on a Friday got the new house
completely set up over the weekend and
the following Monday I went back to the
old shop to start pulling items this was
the final state of the shop before the
move and it's crazy cluttered because I
had all kinds of stuff piled
everywhere due to selling my materials
shed a few weeks prior it ended up
taking me a couple weeks to get all of
these Shop items moved due to the
limited days without rain and also
working on getting the old house ready
to sell the first load of shop stuff was
the work benches air cleaner car the
lathe plywood cart and basically
anything else that I could fit around
the sides of the trail there lots of
materials went on the first load and as
you will see in some of the pictures my
friend Jeremy helped a lot with this
move there's there's no way I could have
done all of this on my own
back at the new shop unloading was much
much easier it was in the shade and on a
smooth concrete floor where everything
slides just well so much easier and at
this point I didn't have much of a plan
for organizing before setting up so I
just tried to kind of pile everything in
the middle after a day or two of
actually thinking about moving all the
small items in the shop I decided on
using old 55-gallon barrels instead of
boxes or totes you know to pack
everything in now the advantage of using
this or these is that they can hold a
lot more weight without say you know
breaking or crushing boxes and they can
all be moved very easily with a two
wheeled dolly which is a lot easier on
my back than say picking up a lot of
boxes here and there and I know you can
stack boxes but with a lot of weight you
can't stack them that high plus these
used barrels are a lot less expensive
and last longer than cardboard boxes
each of these are $5 from Rackley oil
company
if anyone's local in Starkville and was
I guess curious now I did have to cut
all the tops off and before cutting into
any used barrel it's always best to fill
them up with water and that's to remove
any flammable gases that might be on the
inside now I tried to use my
reciprocating saw to cut the tops off
because if the blade I had on it really
chews through metal with ease but the
blade was too wide to make the turn
around the barrel so after one I
switched to the jig saw which worked way
better and here you can see the
difference between the rag and a
reciprocating saw cut and the clean
jigsaw cut after cutting the lids all of
the barrels still had
water on the inside from rinsing and I
had other stuff done that day so I set
them out in the Sun to bake off any
moisture remaining on the inside you
know the last thing I wanted to do was
put a bunch of metal tools and whatnot
into a barrel that's holding water and
that day I left the trailer at the old
house and I only took what I could in
the back of my truck now now this is
really cool having all of my tools in
the shop when it's all said and done and
still being able to back into my shop
and unload out of the Sun or the rain
this is something that I'm really
looking forward to in the new shop the
next day I went back to the house and
rain was expected so I moved all the
barrels inside and I ended up working on
the house the entire time and I didn't
bring anything back for this particular
trip because it stormed shortly after
taking this picture the next rain free
day after that we started moving all the
heavy items starting with the jointer
planer machine and this was the heaviest
of the machines that I have and it
weighs 880 pounds but it was also one of
the easiest to load due to its shape it
fit perfectly between the feet of an
engine crane and I actually bought this
engine crane specifically to unload this
machine when I got it to get the
machines onto the trailer we needed to
remove the rear gate lift the machine
back the trailer under it and lower the
machine onto the trailer the table saw
was a little bit more difficult due to
me wanting to lift it without removing
anything at all and basically we just
had to mess with it and find the right
balance point and push a little bit here
there to clear the feet of the lifting
crane but in the end we were able to
lift it all in one piece without
removing anything then out of nowhere a
small cloud started dropping rain on us
and I had both the jointer planer as
well as the table saw exposed now I
chose this day to move the tools
specifically because there was no rain
forecasted but of course it had to rain
on us
it's Mississippi who went up so we
quickly tarped both machines while I
dried off the cast-iron surfaces the
best I could and then cover them with
whatever
that I had on hand I don't remember what
all I used luckily there was no damage
to the machines at all and in the last
rain picture here you can see the
majority of the sky is clear just just
one cloud decided to drop some rain and
spike our blood pressure after that we
loaded the bandsaw and CNC machine with
relative ease now they were you know air
quotes they're on relative ease they
were each light enough that we could
push them up the ramp on their mobile
base but still heavy enough to struggle
a bit but again a lot less stressful
than the first two machines and of
course unloading them was a lot easier
that the table saw CNC machine and
bandsaw they all rolled down the ramp
with no problems and we only used the
engine crane for the jointer and planer
or jointer planer combo my original goal
was to move everything in and get back
to work as quickly as possible
but sometime around here I finally made
the decision to do some renovation work
to the shop before setting it up I
realized the the cooling efficiency of
the AC unit that was in place just
wasn't as good as I hoped for ironically
enough the AC died on me a few days
after that I didn't want to put any more
money into it I think the compressor
shorted out so my plan was just all
along to switch to a mini-split system
but that plan basically just got bumped
up a little bit on the priority list
back at the old shop this was the
starting point for the second-to-last
day of shop moving stuff scattered
everywhere and the miter saw station
still assembled luckily the majority of
all of this work all this packing can be
done with the door shut and the AC
running all of my hand tools or the only
items that were completely off-limits
for the metal barrels so I filled up the
hand tool tote that I made I guess I
made this in the beginning of 2016 and
the rest of the hand tool items they all
got wrapped in paper and packed neatly
into a cardboard box the game plan for
the barrels was to cram in anything and
everything that could fit making sure of
course to put the the more rigid items
on the bottom and I'd say the idea of
using these barrels it was a huge
success as I could get so much stuff
packed into each one I
get many more pictures that day as I
mainly tried to get as much as I could
packed loaded and unloaded before once
again Maureen the final day of moving
was a pretty long day actually we
started with breaking down the miter saw
station all of the drawers were loaded
onto the trailer and then the cabinets
they could be unscrewed from each other
now this station was the topic of a lot
of comments and questions about this
move was they're going to take it with
me or wasn't gonna build a new one how
difficult would it be to move if I
decided to move this one of course as
you can see I decided to move this one
and it's just a bunch of basic cabinets
that are screwed together so it's more
time-consuming than it is difficult now
one thing I did lose by doing this is
the measuring tape on the stop block
fence it will need to be replaced
because I did have screws located
underneath it later that day my friend
Brandon from Maddox what working came by
to help with taking down the LED lights
and the dust collector while Brandon and
Jeremy worked on the lights I removed
all these small tool holders on the hand
tool wall and removed it from the actual
wall of the shop and I'm not 100% sure
if I'll put this back up in the next
shop a hand tool wall is it's really
convenient as far as like grabbing
ghost-type stuff in it and it looks
really good on camera but I think I can
reduce the amount of surface rust
buildup on my hand tools by keeping them
in a cabinet or toolbox of some kind I'm
still undecided on this finally the
three of us tackled the dust collector
and piping now not all of this system
will be used in the new shop in fact the
only items that I'm actually keeping
from this dust collection setup are the
motor the impeller and the electrical
box everything else including the piping
blasts gates and all that stuff it's all
going to Brandon to use in his shop I'll
be repurposing these parts in one of
clear views new ef5 metal cyclones with
metal ducting in the new shop this is
where we called it quits for the day I
was hoping to get it all but we not only
ran out of gas
physically ourselves but we also ran out
of room on the trailer that was a really
really
long day to start the second final day
of moving I pulled our refrigerator from
the kitchen now the new homeowners they
did not negotiate this in the sale of
the house so it will be the first
welcomed tool addition to the new shop
the end of the two-car garage shop was
this pile of trash to sweep up as I'm
writing and reading this narration it's
a little bit bittersweet leaving this
space but I'm really excited about the
future someone on instagram said that
there's a lot of history on that
concrete and I could not agree more
I can remember so much just from looking
at the floor also a lot of people
thought that I got rid of my condo at
lumber rack when I installed the dust
collector in here and actually I didn't
I just moved some of it behind the miter
saw station and barely anybody noticed
so those were up there for a very long
time I put some of the conduit pieces
back in place for the next owner to use
as a shelf and of course the high wall
storage shelves were left in place on
the back wall and above the garage door
so that's that's that's it for the
two-car garage shop chapter of my life
which sounds kind of weird to say and
next we will continue the start of the
30 by 40 shop series so stay tuned and
I'll talk to you in the next video