hey folks hope you're all having a great
day today this is part three of the new
shop series specifically focusing on the
layout of the tools the workflow here in
the shop and that's something that I'm
really excited to talk about because in
my last shop it was a twenty by twenty
shop garage and I rearranged it dozens
of times as you guys know with the goal
every single time to increase workflow
efficiency and for the most part that
was true up until the later stages of
that shop where I was just trying to be
able to work in there because I cram so
many tools in there so there's some
stuff that I didn't like about the last
shop a lot of stuff that I learned that
I really like about the last shop and in
this video I'm going to walk you through
up to I think I had ten different shop
arrangements on the computer on Sketchup
before we even moved into this place so
hopefully I've done all of the
rearranging on the computer and I should
be able to just set up and get working
here in this shop for the most part
anyway I'm going to switch over to
Sketchup and I'll walk you through what
I've learned over the past several years
of setting up my shop over and over
before I get into the Sketchup model I
want to show you what in my opinion is
the best workflow that I've ever had in
any of my shops and it was this
particular layout now if it was the best
why didn't I continue with it well
that's because I got more tools and I
simply didn't have enough space so I had
to move stuff around sacrificed a little
bit of workflow efficiency for increased
amount of tools that I could actually
use so what we have here is a 4 foot by
8 foot assembly table right in the
middle doesn't have to be 4 foot by 8
foot but this is what I was working with
and probably what I'm gonna go back to
as a matter of fact I am gonna go back
to this this is the center hub of the
workflow wheel I guess you could say so
this is the center area and there's a
spoke going out to the table saw spoke
going out to the jointer a spoke going
out to the planer to the bandsaw on my
left or on the left side of the screen
right here is the workbench and behind
the camera is the miter saw station so a
lot of people say that the table saw is
the heart of the shop because everything
you make for the most part ghosts
through the table saw and in my opinion
that doesn't make at the heart of the
shop it just makes it the most
frequently used tool the heart of the
shop should be the work table the work
surface some horizontal surface that
you're working off of because you never
go from the the jointer right to the
planer right to the bandsaw from the
table saw to the joint you never go from
machine to machine to machine especially
if you have five six seven parts to cut
or mill you always go from a a task area
so that a ripping area where the table
saw to a horizontal surface to hold your
parts to another work surface back to
horizontal surface back and forth you
can't hold fifteen parts at once you
know so this in my opinion should be the
center hub of the work flow wheel if
that makes sense so let's switch to the
Sketchup model here this is the old
Sketchup model of the I should say the
newest Sketchup model of my last shop so
I didn't update this after I got a few
more tools
I got a CNC machine a bigger bandsaw
drum sander and I swapped out the planer
and joined her for a jointer planer
combo but I'm showing you this because
it lets you know that I had a running
model of my shop for the longest time
and it's very handy to have because you
can save a lot of time in the shop by
simply rearranging stuff and Sketchup
now a lot of people have asked me how
long did it take me to model everything
in here this looks crazy that you took
that much time well most of it I didn't
model I just brought it in from the
Sketchup 3d warehouse you can download
these items and scale them to your needs
for example this bandsaw I don't think
it was originally this size i instead
scaled it to the size of my exact
bandsaw so you can download any single
table any table saw you won't really
press s for scale and scale it to the
size you need it doesn't have to be a
100% accurate representation it just
needs to be the exact size so you know
how much space it's going to take up so
that's what I did for all this and of
course the work benches and miter saw
station this cart over here those are
stuff those are items and this air
cleaner cart that I've already
previously modeled in Sketchup because I
saw
for those things so having something
that you can actually see on the
computer really helps you to optimize
space before you ever actually move
stuff around and of course I went too
far and edited the garage door to what I
did for the new shop is I took all of
this and I imported it into the new shop
and let's go back to the left side over
here and this is where I started so the
new shop as you can see is quite large
it's three times the amount of space as
the old shop so something that I wanted
to actually take advantage of here is
the extra space I wanted to have a
little bit of elbow room to move around
the tools that's something that I really
haven't had for a long long time but
here this was my start this is version
number one what I did is I basically
just plopped everything in place the
same exact dust collection miter saw
layout and this was where I had the CNC
machine this is a future router table
move some stuff around did a little bit
of light layout or added a four foot by
foot assembly table and put my entire
office in here as well and I called this
good for the first iteration this
basically just had all of the items in
the shop and some extra stuff that I may
or may not ever get I do have the welder
and carton yeah I like this because it
did give me a tremendous amount of space
that's open here in the middle this open
space is actually more than my last shop
altogether so it was cool to have open
space to unload a trailer or whatever
but it kind of defeats the purpose of
having this space if you're in here
working bumping your elbows all over
everything because you don't have a lot
of space to move around so I didn't like
that I didn't like the fact that the
assembly table is not in the middle of
the workflow wheel I guess I'm going to
continue to call it and I didn't like
the fact that there's some type of
vertical object these this dust
collection drop as well as the bandsaw I
didn't like the fact that these two are
near the miter saw station some of you
may recall that I did have a drop dust
collection drop in my shop and it wasn't
long before I changed it so right when I
got the big cyclone dust collector I did
have a drop for the bandsaw and I think
the planer and I got rid of that so
quick
moving really long boards onto the miter
saw station is really annoying if
there's some big vertical item near it
so I don't like that aspect of this
layout I do like the fact that my office
is all in here and nothing nothing to
major about this layout so let's go to
the next one skip a few versions and
were up to version six again I still
have enough room to park a trailer in
here if needed it'll be really close but
I can if needed that again just doesn't
really make much sense because that is
going to happen so infrequently to get
to to justify having this much space
open for the trailer so that's that's
kind of silly I do like the fact that
there is no vertical item between the
materials to the miter saw station and
to the table saw but once again I never
go right from here to the saws I always
go to an assembly table so I got to go
back and forth this is again not the
center of the workflow wheel there's not
much improvement over here I added a
dust collection closet because one of my
biggest concerns was moving in and
annoying the neighbors who are already
established and living into this
community so I modeled up a closet that
will be soundproof to put the dust
collector and designating some area for
a large air compressor in the future
that sounds all fine and dandy but then
I got to thinking well I'll hold off on
the closet until I asked the neighbors
and figure out if this is even an issue
at all or if the noise bothers me at all
if it doesn't then I'm leaning towards
not actually making this closet but it's
it's if the space is allocated if needed
then I got to thinking well I don't
remember the last time I needed a lot of
compressed air at all like I've got a
little quiet small air compressor that
handles all of my needs so why am I even
designating this much space to an air
compressor that I'll likely never get so
that's a little a little pointless I
don't like the fact that there's only
like six feet of room in between the
the blade and the the miter saw station
over here for the bandsaw
but that's on a mobile base I can move
it over here if needed which again
sounds pointless why do I have to move a
tool if I've got all of this space to
actually set it up properly to begin
with so a little bit better but not
quite where I want it to be as far as
the layout goes and again my CNC machine
I also want to access all four sides of
this relatively easily for maintenance
purposes version six better but not
great version eight we start to get a
little bit better the assembly table
comes in between all of the the work
workstations but it's there's a little
bit of a distance in between here and
here if I'm cutting a bunch of pieces on
the miter saw station there's about six
feet of distance I'd like that to be
well you see these dotted lines that's
something that I'm modeled into the
assembly table itself that's 32 inches
which in my opinion is perfect if the
miter saw stations right here it allows
me to make a cut turn around and use the
table for stacking and sorting and
whatnot turn around and I'm right back
at the station so I think 32 inches is a
really good number to be at as far as
the distance from the assembly table so
a little bit a little bit far I get a
little bit more in feed for the bandsaw
still don't have a little bit better
still don't have easy access to all four
sides of the bandsaw the table saw is on
its own dedicated outfeed table all this
stuff I'd I lose my access a lot of my
access to the what is it the router
table that I put in the wing over here
and then going from the plywood cart all
the way to the table saw that's quite a
bit of a distance as well as you know
well yeah I don't know where it's going
with that so better but not great and
then also the dust collection ran the
dust collection run is much longer so
there's an increased cost there it could
be better we skip ahead to version 9 and
the assembly table gets closer
I still don't solve the issue with the
CNC machine still have a lot of space
allocated to the dust collector in this
closet which
into really necessary better but not
quite there and then finally I get to
version 10 I've got a lot of stuff going
on here so let me turn off the actually
just go to version 10 really quick my
scene I already have all right so let me
turn off the loft and the trusses and
that's hi to these two items because
they're floating in space so what I have
here is a smaller closet if I end up
going with a closet for the dust
collector just enough for the dust
collector I have the assembly table
pretty close to all the stations all the
way around it which is nice I have the
largest table saw I could imagine in
this space being modeled here I don't
plan on getting a sliding table saw but
this gives me a a representation of
anything of the possibilities of the
future right so I've got enough space
for a sliding saw the plywood cart down
here it's on casters now so it can be
moved in front of each one of these
doors doesn't really matter or moved
right there
that's a mobile item not that big of a
deal and I've got some tool clusters
going on with the table saw and the drum
sander or air cleaner cart and then this
tool island which has the jointer planer
combo future router table CNC machine
with excess all the way around very
easily and the bandsaw the bandsaw has
got a lot of infeed and outfeed the
miter saw station is is in a good
orientation in relation to the assembly
table as well as the lumber the tool the
hand tools over here that's fine nothing
there's nothing in the way there and
I've got all this extra space over here
because Plan C alright so I've got plan
a B and C as far as this final layout
plan a was to keep the that's me running
all those other stuff back keep the
office downstairs my computer and these
cabinet stations plan a was to keep them
downstairs Plan B was to put them in the
loft getting confusing myself Plan B was
to put them in the loft
and wall off this area insulate it
really good have a separate mini split
up here and a mini split down here so
that I have this extra space to work in
that ran into some problems as far as
the rest of the attic space being vented
so if this is walled off insulated all
that good stuff then I have to vent this
attic space which I have to regardless
had to regardless and that means the
only scenario because the high side of
the loft of the attic space is opposite
of the loft I have to have the exhaust
on the front of the building and have
one or two intake vents on the back side
to vent the attic I it sounds kind of
crazy or silly but I did not want to do
this specifically because it would look
ugly on the front of the shop the front
of the shop looks really clean looks
really good really good curb appeal but
I put this big ugly vent in the middle
in my opinion it just really really
wouldn't look good so it wasn't it you
know it wasn't the end of the world to
keep the office stuff down here and then
just use this this Loftus attic storage
so I went from plan a to plan B back to
plan a of keeping these down on the
ground level well you know the Internet
is a it's a it's a good thing and can't
be a bad thing it at the same time so
most often you get a lot of you should
do this you should do that you should do
this you should do that a lot of
opinions and suggestions that you don't
ask for which sometimes is annoying but
in this case it was really beneficial
because something I didn't think of that
a lot of you did which makes a lot of
sense is to take down all of the ceiling
panels completely spray-foam the roof
rafter rafters and the gable ends and
leave this with one open floor space
with exposed trusses one open volume of
airspace I should say with with exposed
trusses that way the roof is insulated
all of this air can blend with a fan
here there whatever and I could put a
three zone mini-split system one up here
two on the bottom
and have both environments heated and
cooled I don't need to build any extra
walls these are all like two-by-four
studded walls right now so you can't
fall off but I don't need to build any
extra insulated areas and I can work up
here in the loft and look down onto the
shop as I'm working which actually
sounds pretty cool to do so that's the
route I'm gonna go I am going to spray
foam the roof dresses I am going to pull
down the ceiling tiles completely and
I'll have a triple zone mini split so I
guess this is Plan C back and forth and
back and forth and back and forth so
it's cool to get all of this layout
design all of this you know done on the
computer before I even get into the shop
and it gives me a lot better perspective
on changing stuff around so that's the
plan oh also I could take this even
further because a lot of people said let
me hide these doors a lot of people said
that these stairs the run is way too
long for the amount of rise that I have
here this has taken up too much space
and there's the landing down here is
just stupid small and I would agree with
that so I think what I'm gonna do a lot
of people said just shorten this up and
you let you'll gain more wall space in
corner space but I can take that a step
further I think I can get all the heavy
items up to the office up here and at
that point once the office is set I
doubt any heavy items will need to come
up or down at all if ever so what I can
do I'm contemplating this idea still is
to just completely remove the stairs
altogether and then put a spiral
staircase somewhere in the back so
instead of having all those stairs
taking up the space I literally only
have about as much space as a you know a
flagpole or a fire pole or or bandsaw
really in the back to get up to the
office and what that leaves me with is
a lot I can get rid of these real quick
a lot of extra floor space altogether
now I don't want to designate anything
for this extra floor space right now
that's not really necessary and it's
just flexible options going forward so
if I go if I do everything that I just
mentioned and I do the layout as I have
it here there's still so much space to
work in here I can I can do all kinds of
extra stuff and I don't have any issues
with elbow room bumping into other tools
and I have a really good workflow so all
of that to say that's the plan it's
always open for interpretation but
that's where I'm going to start and I
don't see any need for any changes to
get all the work done on the computer
before I even moved anything in that's
it for this video it's a little bit
long-winded in the next video I will
cover the studying and insulation and
paneling on the lower walls and then
moving all the stuff into place so you
guys take care have a great day and I'll
talk to you in the next video