The clay dirt around the shop is such an annoyance. It looks like I'll be working on it weekly over the winter. We are in the beginning of our rainy season here in Mississippi and the days between the rain just don't allow enough time for the gumbo to dry out completely. I need to keep doing what I can with it and slowly make the situation better. If I could get to a point where standing water areas are eliminated, we would be in great shape.
Previously, we trenched and ran water pipe from the road all the way to the slab of the shop. In this video, I make the final connection between the existing PVC run to the shop. I also installed another yard hydrant with its own shut-off valve.
As I type this, I'm four videos behind. We are already living in the shop with the camper but getting electricity from our generator. The chaos of moving was on pause for the past seven or so months as we started working on the land. The chaos is back in full swing right now as I'm scrambling to establish systems for this new life on the land. Also, I don't have internet at the property, so I'm commuting to relatives to bum internet to upload.
the honeymoon night of the shot being
done has passed so now we got to get to
work on some normal stuff I've got to
finish up the water where is it the
water in that trench over there that's
all pretty easy straightforward stuff
everything's laid out ready to go my
wife is gathering a few things back at
the camper and back at the shed behind
the camper and back in the
conx and uh we have stuff scattered all
over the place I'm starting to go
through the process of cleaning out my
truck oh
yes to start putting stuff into the shop
now of course we're just going to move
one pile of unorganized mess into
another pile of unorganized mess but it
it'll slowly start to get better you
know what I'm saying speaking of slowly
start to get better I'm going to jump on
the tractor and slowly start to make all
of this craziness better so that my wife
can get us close as possible with her
car to the to the uh rollup door and
make her life a little bit easier and of
course it has to get done anyway I'm
going to be on the tractor for the next
little while until she gets here
[Music]
[Music]
[Applause]
[Music]
[Music]
he
[Music]
[Music]
[Applause]
[Music]
[Music]
oh
[Music]
[Applause]
[Music]
[Applause]
[Music]
oh
[Music]
[Music]
[Music]
oh
[Applause]
[Music]
[Music]
oh
[Music]
[Applause]
[Music]
oh
[Music]
oh
[Music]
[Applause]
[Music]
[Applause]
[Music]
[Applause]
[Music]
[Applause]
w a
[Music]
[Applause]
[Music]
[Music]
[Music]
[Music]
[Music]
[Applause]
[Music]
I tell you what raising your heart rate
during uh work so that you're starting
to sweat and your body's really loosened
up and you you're just just just
constantly moving gosh that makes you
feel good makes me makes me feel good
anyway uh let me spin you around and
show you uh the method of my madness
water supply coming this way and it tees
off into the shop and then over there to
the uh yard hydrant uh brass fitting
stainless steel crimps I still like to
just wrap it in a trash bag just to you
know keep water off that uh that
Junction as much as I can and then um
sewer coming out now that's glued
together schedule 40 PVC crimped
together uh pecs I don't see any issues
with cross-contamination this is I'm not
subject to any rules and regulations as
far as this this setup right here goes
uh putting portable water and sewer this
close together I don't see any issues
with cross contamination just logically
thinking about this anyway because the
the PEX is under pressure so if anything
the water is just going to leak out I
don't see any way possible for sewer to
get into the pressurized supply line it
just doesn't make any sense to me so I'm
okay with this being super close
together uh PEX goes slightly or well
just goes right on top of the um
schedule 40 and goes that way to the
yard hydrant uh this looks it may or may
not look look shallow here uh but where
I live here in Mississippi the frost
line is only 8 in deep that's a 08 for
all you Northern
folks 8 in deep and um also uh where is
it there's the slab level so I want I'm
going to build this up quite a bit to
get to that anyway I'll have to elevate
that pad just slightly that's the air
raater for the septic uh so this is all
going to be elevated quite a bit
probably up to about here here and that
is a good foot higher than that so we're
good we're good this goes that way into
this box right here which has who
slipping around has the shut off
valve oh come on I don't want to disturb
this box too
much H let me use both hands real fast
all right so in here is the valve to
turn this on or off I put a bed of
gravel below it and also Al elevated up
the gravel on the sides where this uh
straddles the pipe that way gravel
should stop dirt from infiltrating that
way you know it's going to come in there
a little bit just from water seepage and
whatnot but that'll be a good
nice um way to keep that nice and clean
down inside there not going to put that
down there just yet now this is what
I've started doing for all the yard
hydrants here and I think it's working
out quite well uh so this is a two foot
Berry yard hydrant and I went with twoot
berry to only Berry at 1ot so that this
is a little bit higher up 1ot Berry is
plenty deep enough where I live
um the grade over here is going to be a
little bit lower than this bucket which
is what I want I want this to stay
elevated uh just just to keep this nice
and clean no dirt to get inside here and
of course this is going to have like
also a u a a big wide bed of rock to
stop the splashing from the roof above
uh anyway I put about a bucket and a
half of gravel down below so that the
water can trickle out on the bottom this
is a frost proof hydrant when you shut
the valve off at the top or turn the
handle off the water comes or it seeps
down and drains the whole stem of the
system stem of the hydrant to stop it
from freezing so I've got about a bucket
and a half of gravel at the bottom and
of course this is a 5 gallon bucket
right here and you can see it's full to
the top so plenty enough gravel for
letting it um drain down I like using
these buckets I started doing this on
this property um because that stops the
dirt from infiltrating into all this
gravel keeping this gravel nice and
clean with gaps in between to allow the
system to work and drain and whatnot um
that's a huge hole that the guy thought
this was going to go into and I I kind
of initially wanted it over there a
little bit anyway so I got to start back
filling all this uh this is pretty darn
secure because I did put a tpost in
there as well uh quick little velcro
temporary connection to hold these two
together I'm going to get some copper
wire or some type of fence uh fence wire
and and really get these tied together
but this is a very stable connection and
it'll prevent you know putting the hose
on there and then dragging the hose 100
ft accidentally yanking it and pulling
on this quite a bit uh it'll really
increase stability over time especially
when all this gets filled up with dirt
and and rock and whatnot
so the only thing left to do is this te
goes into the shop like I said I've got
to put a shut off valve inside there
right as it comes out of the ground give
myself 6 in or show or so I'll put a
ball valve inside that way I can turn
every ball valve off and slowly open up
the valves here and there to get water
out of here once water is out of here it
airs out of the line then I can uh check
for four leaks no leaks then I'll cover
this up but I got to get this done
because um the next let's see today is
Sunday when I'm recording this and I
believe this week we're good but the
following Monday our low at night on the
10day forecast is
22° which for Mississippi that's pretty
darn cold not looking forward to that
night and it's not even like the coldest
month yet our coldest weather is the end
of January and we're in the end of
November
so it might be a cold winter and I'm not
looking forward to that water comes in
through here obviously and I only got
the bare minimum number of connections
so I just going to shut this off to
pressurize the line that's fine this
will come up just slightly to a T and
the T will come off this way with
another ball valve uh this ball valve
I'll have this right
here so that way uh when the time comes
for us to no longer be in this space and
it's just part of the shop and I don't
need to pressurize these lines ese
especially over the winter I can shut
this back off open up that valve and
drain the whole system everything Above
This Will drain out and that will leave
just this that I can insulate quite a
bit and not have any worry about
freezing here in the shop when we're
living in the house down the
road all the way from the road supply
line comes all the way to here I've yet
to super super fill in the trench just
kind of letting nature do its thing
letting all that settle before I start
piling more stuff in I did in some areas
but not all the way through so I'll work
on that at at my convenience later
coming to this Junction this valve is
for this hydrant this valve is for the
shop there's another Buried one here for
a future expansion that way but this one
just pulled the cap off H you can't even
see the valve it's down there deep
enough my wrench is just
PVC 2in p you see uh which way is the
thing okay this
way valves are shut off at the shop and
from
here it is
open did that go all the way let's see
not quite all the way I may have two
hands for this
there you go she's
open she's open and all of
the valves are still shut I'm going open
them one by one over here this thing
leaves tomorrow which I'm kind of
excited about it leaving because once it
leaves I can start grading this material
this way so all the water slopes and
puddles over there which is where I want
it to not puddle but I'll have a sale
there already is one but I'm going to
keep the water going that
way not until that leaves though back to
the task at hand let's get make sure
this water isn't leaking
anywhere let's see turn the water onto
this
hydrant we still don't have any open
valves just yet so this is probably
still air in the line I've got a garden
hose 100 ft that way because I'm so
tired of mud right here anyway see what
happens here comes the water oh I can
hear the water coming to that line
now all
right an uneventful
process is what I want I can hear some
some bubbles coming
out oh I see the water fountain over
there so we have
water that's pretty good pressure 3/4 in
hose 3/4 in line that's what 180 ft into
a 1in line which goes another 80 ft
going into 2in line which goes like uh
close to
was 1,50 ft something like that 1,300
feet
total turn it off and I can hear it
draining right
here good good good good good we are
good now I can start uh closing all this
stuff
down everything's connected inside
we have the supply coming in to a ball
valve to shut it off going into a te to
another ball valve which will eventually
be used to drain the whole system so in
the winter time when uh no one's using
this space and we're in the house down
the road uh I can shut off the supply of
course this bottom could be nice and
insulated just fine and then everything
that's in the system can be drained out
of this ball valve and well be drained
out um but I have this stem coming up
that is capped for future expansion
which is uh when we get in this in this
space I can hook up the camper to this
and this will is a drain but it's also
allowing us to fill up currently fill up
the mop bucket so that way we can mop
all the mud out of this space which is
what she's doing right now so we have
water access in the shop right now that
we can use mop it all and then dump it
out that door because that side is is
okay for water I don't want to dump it
out anywhere over here that's the lean
to I want to keep it nice and dry and of
course that way is the the ooey gooey
gumbo that I'm trying to dry out too
so good little working system onward to
the next thing
[Music]