Check Out Our Patreon Account, for Unreleased Repair FAILS, Concise Repair Tips Not Possible In This Long Form Video, And 1 on 1 Repair Assistance with YOUR Project!
Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
Ladies and gentlemen, this is Joe's
Classic Video Games back with another
cool pinball repair video for you this
evening. We have been working on this
Ballet Supersonic forever. We bought it.
Playfield was destroyed. All the game
boards were destroyed. Uh there was a
short on one of the boards that fried
all the other boards. Um and we've been
working through it. So, we've done
several videos on this. It's the whole
series. It might be the longest series
we've ever done on a game. We've been
limping along a little bit more. a
little bit more because it needs so much
work done to it. So, what we've been
doing lately is repainting the
playfield. It had heavy wear right in
the center of the playfield. So,
we did a video where we figured out
where the S's were and the T and put
that back and did the orange. And then
we did a video where we did the red and
we had done some of the cream, I guess,
when we did the orange. Uh, and then we
did a video where we did the burgundy
and some of the lettering that we got
back. And we're up to now we have to do
the yellow, which is kind of the hardest
part.
So, what I have done is everywhere that
the yellow was worn, I went ahead and
put some primer. It was worn down to the
wood in several spots. So, like if you
look at the blue here is literally all
the paint's worn away. It's worn down to
the wood. So, it was like that in
several places.
And uh whenever I did the cream, I did
it on the yellow just so that there
would be a primer because the yellow has
a bad habit of taking 50 coats to cover
just the plain wood. So you can't do
that. You've got to put some kind of
primer on it. Some of the other stuff
you don't have to put primer. The red
covered pretty good. Um the orange
covered pretty good. It's I can't
remember. We might have done primer on
the orange, too, but whatever. You get
the point. Um, so everywhere there's a
little bit of cream on the yellow, we
need to we need to touch up. Now, I
doubt this is going to come out perfect,
but we'll see. We'll see how good we can
get it. The way I do it is I just use
acrylic paint. Um, because you can clean
it up what easy. You can easily mix it.
It's very inexpensive. Uh, we've got,
you know, tons of I don't know. We might
have a hundred different I'm looking at
the boxes.
There might be 200. I might have 200
bottles of of acrylic paint, just
different colors. You can buy it at
Michaels and uh Hobby Lobby
for It used to be 69 cents, but
inflation has hit. I've been told that
it is now on sale for 99 cents. So,
that's cool. It's not too bad. So yellow
is this part,
this part. This is actually yellow.
This part, this part, that part, that
part, that part, and that part. So
there's quite a bit of yellow, actually.
Oh, and the star and this star. This
star is yellow, and it has orange in the
middle. So we're going to have to break
out the old orange again to finish that
one up. Uh, so that's what we're looking
at.
I didn't put primer on the star in the
middle. Knew I was forgetting something.
It's okay. We can still do it. So, let
me get my yellow paint and see if
there's any of them that look like
they're going to be even close
to this yellow enough to fool your eye
where you don't quite notice it. Like
the red and the orange and the burgundy
are slightly fooling your eye where you
don't quite notice it. Of course, I
pointed it out and the lines are kind of
squiggly, so you can kind of tell, but
all in all, it's looking pretty good
compared to where we started. So, I'll
show you where we started. You've
probably already seen it. I'll show you
where we started and then we'll uh I'll
we'll come back and look at the yellow.
So, this is where we started.
So, we've got a lot of it painted in
now. Okay. So, here are all of my
yellows that I have to choose from. One,
two, three, four, five, six. I have
eight different yellows in my bag of
tricks.
So, what I do is I just look at the
bottom of it and see what matches or
comes close to matching. The they fade
different, too. So, it's it's kind of an
imperfect science. So you can't if you
match it to down here, it doesn't
necessarily match up there because
they're they fade different on different
parts of the playfield and they wear
different. If you look really close at
this,
see that? That looks dirty, but it's
really We went too far. We always go too
far. Um it's really little micro
cracks on the playfield that the ball is
caused. We've cleaned that up as best we
could with a magic eraser, but you can't
get rid of all of it. If you keep going,
what happens is you rub through the
paint and start getting into the primer
that's original to it, which is what's
left over here. That's what that little
the white speckling specking is.
Right. So, that was as clean as we could
get it. It was much dirtier when we
started, but if you look up here,
looks pretty good. But if you get close,
you can see that the same thing's going
on. So if you match that, it's going to
stand out down here a little more and
vice versa. So like I said, it's an
imperfect science. We're going to do the
best we can. So I look at the bottom of
the bottle, which is a little lighter
than how it's going to turn out. Um I
may be able to Sometimes there'll be
dried paint on the top and you can kind
of tell. Um, but we're just looking to
see what's close. Hopefully, we can find
one out of the bottle that just kind of
matches and we can just leave it like
that and we don't have to mix it. Okay,
so this is saffron yellow. I always uh I
always think about that Beatles song
this the Savo shuffle this or something
like that. Every time I see that it's
different. The saffron sh the Savoy
shuffle. Okay, it's nothing like it.
It's too orange. So, that's not a thing.
That one's not going to work. It's not
even close. Goodbye. Saffron yellow.
This one is primary yellow. You may not
never know that they had so many
yellows.
Similarly, it's too orange. It just um
which I guess would be, you know, it's a
little more red. It's a little warmer
color. And the yellow on the playfield's
a little cooler. So, it's not going to
match either. It's not even close.
Okay. Okay. Well, here we have what they
call bright yellow. Now, if you look,
see, there's some dried paint. I guess
you can't compare it. See how that looks
lighter? But it's obviously darker. It's
kind of hard to I can't show you both at
the same time, but um so it dries a
little bit darker.
It looks like it might be similar. Let's
see how the dried part looks. And see
the dried part to me looks too orange
again. But maybe might be worth a test.
Might might test that one.
Okay, now we've got this one. Lemon
yellow.
It's more green,
right? So it's it's it's too green.
They've went too far um towards green
away from red. So you know there's a
color wheel. You got red, green, and
blue are the three primary colors on a
color wheel. So red, green, blue. If you
go halfway between red and green, you
get yellow.
Have I got that right?
Am I? Yeah, that's right. Okay. And if
you go halfway between red and yellow,
you get orange. So,
um, maybe I should pull up a color wheel
to make sure I'm not lying to you.
Red, orange, yellow, green. Yeah, that's
right. That's correct. Red and green
make yellow, though. That doesn't sound
right. No, red and yellow make green.
Okay, I got that backwards.
Damn it. We're going to have to check.
Always trust your instincts, people.
You're always right the first time.
Okay, red and yellow. Right. So the
yellow that that um
that one yellow, it's like on this side
of it, right? So here's yellow, but if
you're a little bit too close to the
green, this one doesn't show a ton of
gradients, but you're going to be a
little Let me find a better one. This
one says the emotional color wheel.
That's what we want. Okay, so red. We're
over here in yellow. So, if we're right
in the middle in yellow, it's very
yellow, but it can be a little more
orange if it's closer to red. That's
kind of what some of ours are. Or it can
be a little more green if we're closer
to green. So, it just depends on where
you are, like how much red paint's in
it, how much green's in it. And then to
move from
I don't this again,
whatever. But to move from here to here,
if you add more of this color to this,
it will dull it out.
All right. So, this is a little better
representation of what we're actually
doing. So, on the on the um in the
spectrum of light, if you add all the
colors together, you get white. So, the
center is actually white. If you're
talking about light, right?
Light, right? But if you are talking
about paint, as you get towards the
center, it gets darker actually and you
end up with black in the center or dark
gray or brown.
Right? So to get this from vivid to
this, you don't add black, you add the
opposite color. So like if I put a
little bit of purple in this, it's going
to
kind of make it look a little more
dingy.
That's just how it works. Same thing
with this. To make red look less vivid,
you put a little bit of green in it and
it'll just it brings the brings it back
towards
closer to the middle of the color wheel.
Right? And again, it's not exact. It's
all you're mixing stuff together and
you're not measuring anything.
All that to say, this isn't a pure
yellow. It's a little more green. If you
can see it, you can see it. If you can't
see it, you you you know, after a while,
you still kind of start noticing it.
That's not It's not more red than that.
It's more green than that. And if you
think about it like that, you can kind
of see the green in it. And once you
start seeing it like that, it makes it a
little easier to mix the colors.
All right. Next up, we have cadmium.
Cadmium yellow. I actually use this on a
lot of ballet games. Um, a lot of the
stuff like uh Lost World and stuff uses
this color, but again,
if you look at it compared to the
playfield, I don't know how well that's
showing up on camera.
Maybe you can see it there.
Right?
It's not a match. It's a little too
orange because it's a little bit more to
the red side on the spectrum. So, we
want it right here. Wherever this is,
this might not be right in the middle,
but this, however, wherever this lands
on the wheel, this is slightly towards
the red side of it. It still might be
fine. It might dry out and look better,
right? Another thing, too, is if you're
going to uh touch it up and you're not
going to you don't have a perfect match,
you want it slightly darker
than it appears to the naked eye. So,
this would stand out like a sore thumb
because it's so light. You just see it
and you be, "Oh, good lord. Somebody
poured green paint on the playfield."
But if it's slightly darker,
it blends in a little bit and you don't
quite notice it as much because it looks
it just naturally looks like wear. And
this thing has wear all over it. Like
right here in this shooter lane, you're
not going to look at that and go, "Oh
god." Right? It whenever you see it, it
just looks like naturally old wear
because the thing's old.
That's my story and I'm sticking to it.
Okay, this is golden yellow.
That has a lot of promise to my naked
eye. That looks very similar.
So, I like golden yellow. Okay. Then we
have yellow light, but it's almost
empty. I don't know that I could even
use this.
It looks pretty good, but again, it's a
little too green.
that. But I can't even use it because
it's basically empty. I think it dried
up. I need to go get some more yellow
light. And if you put it next to the
lemon yellow, you can see the green.
You can see the green compared to the
ones that are too orange. Just a little
bit green.
And then we have bright yellow, which
might actually be
This says bright yellow as well. This is
Anita's and this is Americana. So, it's
going to be a different shade because
they and they do look different.
Um,
that looks pretty close, but it's again
the bottle's almost empty. Okay. So,
what I'm going to do is I'm not going to
do anything right here because whatever
I do, you'll notice. And we've got this
issue where we don't want to put a bunch
of coats on it because you can see all
the brush strokes.
So, what I'm going to do is we're going
to go up there and mess with it. So,
this little
shot up here, all this is supposed to be
yellow. And so, I can test my color up
here. And, uh, if we get something
that's a pretty good match,
uh, then we'll transfer it down here.
Like I said, they fade a little bit
differently, but
it's better than testing it all right
here, right above the flipper, where
everybody's going to be looking
constantly. So, I'll test I'll put a
little test yellow down and we'll see
how it looks. Okay. So, I've been doing
the yellow.
Um,
again, yellow is the absolute hardest
color. You will never find a harder
color than yellow.
The ones up here, I just did the smear
technique if you didn't see me talking
about that on the last video. Basically,
you just smear a little paint on if
there's cracks in the paint. And then if
you wipe the paint off, the paint will
stay in the cracks. So it kind of just
fills it in. So those two aren't that
big of a deal. They just need the black
touched up and they'll look pretty good.
I did the same thing on the red up here.
So if you think that looks all right,
then this will look all right. Uh same
thing here. And again, needs the black
touched up and it needs a little bit of
the orange touched up, but there's also
a post that goes over it and it's going
to be fine. This one,
all kinds of text is missing. So what I
do whenever I do that is the parts
between like here, here, here, here,
here. I paint thick and then I just take
the yellow, which is, you know, it needs
several coats usually. And I just paint
over the text, but thin enough that you
can still read the text because it'll
make it easier for me to to uh trace it.
I'm not per I'm not great at the
lettering, as you can see here. It's not
that awesome. That's from a previous one
that I did. Um,
okay. Over here, I did the smear
technique and was able to fill that in
pretty good. I think that part's going
to look great.
The 345 again once I put the black
lining on it
up here. This was a big mess if you saw
the earlier videos.
Real mess. Now, of course, again, have
to put black lining on it. And there's a
plastic that rides this whole right
side.
And there's a spinner here. So whenever
you look at this, you're going to be
looking at the spinner and the plastic.
You're not going to be looking at that
this is one color and this is a
different color. So hopefully it blends
in pretty good. So what I did was I took
golden yellow, it was too yellow. I took
saffron yellow, it was too orange. So I
had to mix. So I took quite a bit of
golden yellow. And then I just put a
couple drops of this in there. and it
oranged it up just a little bit. Can you
tell?
I don't know how well the camera is
going to show it, but this is much more
orange than that
because it has this in it.
And so if you're trying to do that on
that color wheel, you don't want to mix
like straight up orange in it. It's
easier to just use like a yellow that's
more orange. So you're kind of just
pushing it that way, you know, and
you're still going to get all of the
yellow in it and blah blah blah. So
anyway, so that's what I did. So I used
a little bit more orange yellow and it
orangeed it up a little bit. We'll see.
Um that might come back and bite me, but
we'll see. Uh the star in the middle I
put primer under and then painted the
little
block over here, the 3X, I uh painted
it, the back of it yellow. the star
here. We had primer on it already. I
painted it yellow. Okay. So, the the
toughest part
is what was going on down here. I think
I've got a good solution for it, but
it's not a perfect solution for it. If
you didn't see the previous videos,
there is a spot, a wear spot down to the
wood right here and right here. And it's
just fugly. It's like that but much
bigger. I can't mess with this one
because they put this myar protector
over it. I could have peeled it off, but
I usually don't mess with them. I just
leave them with a little bit of wear
under there. I'm not too concerned about
it. Um,
so, uh, you can just paint that little
spot back in the wear spot, but then
you're just going to see it all the time
and it, you know, it draws your eye to
it. Uh, another option is you can paint
the whole yellow piece, but then the
whole thing looks like a coloring book.
like the middle already does, you know,
everything's not sharp or anything, you
know. So, I decided to just
paint the corner and just break it right
here. Now, you can see the brake. If you
got the color dead on,
you could probably hide the brake pretty
good, but you've got to you've got
compounding problems here because of the
way the wear is. So, that's not one
color.
So, you've got to match that and the
wear.
You know, if I painted the wear line
back in, it would probably actually look
a little better, but I I can't bring
myself to do that. Um, another thing is
if you look at this,
it looks more orange than what ended up
on the playfield. Now, part of that is
because what's on the playfield is
thinner
than what's in that cup.
But I've noticed too that whenever you
put clear on it, a lot of times if
you've got something like that going on,
like there's a color missing there. Like
that doesn't look as orange as this. A
lot of times when you clear it, it'll
come out. So that might end up being too
orange.
This and this.
It's close, but you know, it ain't
perfect. Another thing you could do, you
could try to get tricky with it and
paint over some of the wear, but then
you run the risk that you'll you'll see
that too and it's kind of annoying. So,
I just did what I did. Um,
I always try to put if you're doing that
where you're trying to break something
and this is the most unfortunate place
to have it. Luckily, you know, whenever
whenever you're playing, you're kind of
looking right there waiting on the ball.
So, it's kind of it's the worst possible
spot. But, we do have all this going on.
So they it might draw their eye up here
where they're looking at this and not
really paying attention to that. But
we'll see. Um so whenever I do that, I
try to make it where
the lines are never straight because
you'll never get them perfectly straight
and then you can tell that they're not
perfectly straight. So trying to do this
and even with a ruler, if you're trying
to do this, um but you get it just
slightly off, everybody's going to
notice it, right? If it's horizontal,
it's a hard break and your eye will just
catch it because you're looking this way
on the playfield. That's just how you're
that's how the thing's laid out and
that's how you're looking at it. So, I
put lines going that way, but I slanted
them to kind of I mean, it's not the
same angle obviously, but to kind of,
you know, all of this is a fan and this
is angled and this is angled and the
flippers are angled and so I'm trying to
just angle it a little bit. So hopefully
it'll blend in a little bit. We'll see
whenever it's done.
Personally though, I think the playfield
looks a heck of a lot better than it
used to.
All right. So, uh, what I'm going to do
is I'm actually going to clear this part
real quick to lock it in. And then I'm
going to do some of the black ink over
the top of it and hopefully get it to
look even better. So, um,
someone mentioned, uh, there was
something I was gonna Oh, the rollovers.
Somebody asked, "How do you tape off the
rollovers whenever you spray clear on
it?" I don't tape off the rollovers. I
don't tape off anything. One, it's
clear, so if it gets on something, it's
not that big of a deal. But, two, it's
really actually thin. If you if you
spray on a clear coat out of a rattle
can like we'd usually do on this like
we're doing on this one, you're not
putting down much at all. It's really
really thin. So, it's not going to cause
a problem with these. So, what usually
happens is they get stuck and you can
just press them a couple times and
they'll push back down. Yeah. So, see,
I've painted over this like twice and
they still work fine.
I have had those before though where
they're they're stuck.
It's usually the wax that actually does
it. These come out from the bottom. You
can just pop them out and then run
something like a toothpick or something
through the uh through the little insert
and clean all of those out and then
it'll work again. And you can buy these
little star plastic pieces brand new.
They reproduce those. They're like 50
cents or something.
All right. So, um, yeah, let me spray a
little clear over the yellow areas.
Um, and then we can start trying to put
some of the lettering back in. There's
not a ton actually, but a lot of the
edges and lines and stuff are just going
to look better after it gets some black
on it.
Okay,
so I cleared it.
I think we're looking pretty good down
by the flippers. New flippers, new
flipper rubbers. The plastic's on and
everything. That's going to look pretty
decent. Here's my 3X. Came out pretty
decent. The star is looking pretty good.
There's still a little text I got to put
on it. Uh, I got this. I still have to
finish the special, which is in orange,
of course. Think it's looking decent.
Um,
this I, you know, put the ring around
the hole again, wrote advanced bonus
back on her. All that was completely
missing basically. Um, put the black
circles around the lights.
That one I was already done. I just uh
cleared it. Same up there. Put the black
ink back on. Those look perfectly fine.
So, I think all I've got left I'm going
to go ahead and put the This says like a
hundred on it or something. The way I'm
telling what to put on them, I'm uh
looking on the um internet pinball
database. IPD ipdb.org.
internet pinball database.org.
Um, then there's pictures of about every
pinball machine ever on there. And
they've got a whole bunch of pictures of
Supersonic, so you can check it out and
tell how the stuff's supposed to look.
It's very passable right now. I'm going
to go ahead and finish the blue, though.
That will, you know, be basically
everything on it has been repainted. Um,
and uh, of course we still have to put
all the plastics and everything back on
it. We have to wax it. We have to put
all of the um, um, we have to replace
all the bulbs, all of that jazz. So, uh,
next up though, let me I need to ink in
this circle, too. So, I need to ink in
that circle and I need to write a 100
points on there. I don't know if it said
100 or 100 points. Probably 100 points
when lit or something. I'll look on
internet pinball database and then uh
we'll go for for there. I'll save the
special till next time because I got to
make orange again. There was something
else that needed orange.
What was it? Maybe that's it.
Oh, the jetream up there needs a little
bit. I inked the S and the T back in,
but they're the wrong color as you can
see.
Um, but we're getting there.
All right. 100 1,000 when lit is what it
says according to the pictures on the
internet pinball database. And then this
one, this little star here needs some
orange in it. So that was the other
thing that I need orange for. So I need
orange for that. Uh orange for the
special, a little bit of orange for the
jetream.
Um and then I think we'll be done with
that. So this is where we're at and it's
late again.
So I'm going to the house. Before I
leave though, I'm going to put final
clear coat over the black that I've
touched up on all of the yellow. So,
I've got to clear coat this, this, this,
this, this, this, this, and this. It's
all got black. Um, and then I won't have
to worry about if I spill paint. Like
when I'm doing the blue, if I get some
on top of all of the other stuff, it
won't matter because it's got a clear
coat. And since it's acrylic paint, you
can just wipe it right off. You could
literally spill paint on this part of
the playfield right now and just wipe it
off because I've cleared it.
So, I'll show you the before and the
after.
This is the before. We'll go back in
time to how it looked worn again and
then we'll come back with the clear.
Okay. So, with the clear, it's all
blended in. It's starting to get a
little bit of a sheen on it. H, you
know, I think we're to the point now
where it's all starting to come back.
Look how that kind of the clear kind of
brought that together.
I mean, I've literally painted just the
right side, not the left side. And you
can't really tell that well because of
the clear. It just it makes the sheen
the same, and it plays a little trick on
your eye, and you see the light shining
across all of it. So you don't notice
that maybe that was different. You do
see the brush strokes though. So I'm
good. Maybe I'll show it from a
different angle,
but the clear really helps. That's, you
know, once you do that, it starts coming
together. So I think,
you know, considering what we started
with,
I think it looks really good. Um, I'm
aiming for a seven. Trying to get to
seven. I don't know if I'm going to get
there. Um but hopefully we can get to a
seven. So that's what we're looking for.
So I've still got to paint the blue in.
Got a little bit of orange to put on. Um
is that it? I got to put everything back
on. Yeah, I guess that's it. I got to do
the blue and a little bit of orange. And
the blue doesn't have any
text on it. Although it does have the
lines around the edges. There was
something else that I just noticed and I
was thinking about.
Um,
yeah, that's it. Okay, so blue and a
little bit of touch-up on the orange and
then a little bit more black and then we
have to put everything back on it. It's
laying over there on our fun house.
Um, I've got to clean on that freaking
apron. They put a big old sticker on it.
H, what are they thinking? Uh, but
I'm pretty freaking happy with how it's
turning out. I think it looks pretty
good all things considered. It's not
perfect. Has plenty of flaws. Once you
get the glass on it and it's set up for
people to play, I I as as crazy as it
sounds with the text messed up and the
obvious where I repainted this. Nine out
of 10 people that come in our store will
not know that that was repainted.
Now, if you're a collector, soon as you
walk up to it, you're going to see that
it's repainted. But most people just
aren't going to tell. Um, and so once
you realize that, it makes you a lot
more brave with doing stuff like this.
Even though, yeah, it's got flaws and
there's parts that are crooked and all
of that, the average person doesn't even
notice it. So, there you go, folks. I
hope you enjoyed it. We will see you on
the next video. If you want to see us
paint on another one, I'm sure you just
can't wait.
I'll put up a video here of one of our
other escapades.