Milwaukee M12 SubCompact Brushless Drill & Impact Driver Combo Review [3494-22]

Gadgets Tools
5 followers
Milwaukee released their new M12 Subcompact drill driver and impact driver combo which is the smallest yet. Both the drill driver and the impact drivers include brushless motors, but they're not a part of the FUEL family. You can get this kit with both the impact driver and drill driver for just $149. The kit also includes 2x 2.0 Ah M12 batteries and an M12 charger.
#machine #tools #powertools
Milwaukee's combo number 3494-22, that's their two-piece combo on this M12 subcompact brushless
combo kit. So you get the drill driver as well as the impact driver in this kit. Now the idea here
is basically the smallest impact driver and drill that Milwaukee has made and it's a brushless
motor. Now don't confuse it, even though it's a brushless motor, with the M12 fuel platform. This
is not the fuel. So the fuel always lets you know that designation that you're getting the latest in
their technology as far as their battery management system, their intelligent technology that talks to
the battery and the brushless motor and the charger and the battery and all those different
things. I forget the RedLink technology. However, they do say the RedLink technology is built into
this tool. But again, it doesn't have the fuel designation. So not quite as powerful of a motor.
It does come with two of their CP 2.0 batteries. So you get two of the M12 2.0s. So you have two
amp hour batteries. And just to confirm, that's going to be, should be 24 watt hours. Yes. So 24
watt hour lithium ion battery. And you get that awesome carrying case and the M12 charger.
So obviously, they're stating the smallest being the subcompact. But what kind of power are we going
to get out of this? Well, that's what we're here to talk about. We're also here to talk about the
size too, because that does mean something. First, let's talk about the units we're getting. So in
the combo kit, we're getting the drill driver, which is the model number 3401-20. And this is
their drill driver. It's not a hammer drill driver, and it's not a half inch chuck. You do get a metal
chuck. So all metal chuck, but it's just a three eights as far as the diameter of the opening for
the chuck. You get an LED light here, right here below the chuck. And then we get two speeds as
well as the fuel gauge right there on top of the unit. As well as a clutch with, looks like 13 or
14 different settings. Lock it out in drill mode or use the 12 position clutch or maybe 13, 13
position clutch as well. 14 with the drill mode. And then for the drill or for the impact driver,
quarter inch hex impact driver, pretty typical. And the model number on this is a 3450-20. Again,
brushless motors in both of these. And if you'll see, you'll see how small the diameter of the
bodies of these things are. The handle of the M12 stuff is, is pretty typical across their drill
drivers, impact drivers, the stubby things like that. Is that kind of same pronounced little
pregnant shape that has to be there for that M12 battery to fit up in there. But it's just a grip
that you're used to if you have any of the M12 fastening or drilling type of units. You get that
same look and feel with the rubber over, over molding and everything else. Still get a variable
speed trigger in both of these. And as I mentioned, two speeds on the drill. Now when it comes to the
impact driver, we don't have multiple speeds on this one. It is a one speed fits all, if you will.
Now talking about power on the power side of the drill, I believe they're claiming 350 inch pounds
on the power side of the impact driver. I believe they're saying 1100 or 1150 inch pounds. So that's
nearly a hundred foot pounds, 1200 inch pounds would equal 100 foot pounds. So just take inch
pounds, divide by 12, that gives you foot pounds. So the amount of torque is right out, right at a
hundred foot pounds again, but with no speeds other than the trigger pull on this, which is,
I believe 3000 RPM on maximum. So you can take that as slow as you want to with the trigger and
all the way up to the maximum of 3000 RPM and 4100 impacts per minute. And on the drill, we get a
maximum of 1550 RPM. Obviously that's going to be on speed two. So we go slow as we want. And then
again, that variable speed trigger. Now I believe in speed one, it's like 450 RPM on that. Now let's
look at size on these. If you're looking front to back or tip to tail, if you will. So the front of
the impact driver to the back is 4.3 inches. And for the drill, it's 5.36 or right at 5.4 inches.
And then as far as height goes, not that that really matters, but about seven and a half inches
on the impact driver and about eight inches on the drill driver. Now we start looking at the
diameter of these, of the body of these, being able to kind of fit in those tight spots. Less
than two inches. So 1.96 inches probably on both of these. Yeah, a little over two inches there.
So depending on where you're measuring this, probably about the same here. So it looks like
the impact driver is just a hair smaller, but right at two inches as far as diameter across
the main body or the main motor of the drill driver and the impact driver. Now, where does
this relate to say an M12 fuel platform? Well, number one, let's talk about the pricing of these
guys. This whole kit right here, you're looking at 150 bucks right now. Now I think regular pricing
on this is $199 or $200. But right now I've seen it for 150 for quite a while. Who knows, will that
go off? Maybe. But 150 bucks for a complete combo kit. Again, you're not getting a hammer drill
driver. You're not getting a half inch chuck. But if you're needing to do small projects, this is a
great kit for being under $200. And again, you're still getting that efficiency of a brushless
motor. No, you're not going to get a ton of runtime out of a 2.0 battery. But if you're drilling
eighth inch holes, it's probably going to last you all day. You know, if you're driving one inch
screws, again, it's probably going to last you all day long. And if not, you've got your charger to
quickly charge those things. So again, if you're on that light user spectrum, either as a pro or
even a DIY or we're talking 150 bucks, there's not many combo kits you can buy at just, you know,
in between that $100 and $200 range. Now let's take a look at how it compares to say this. Now
this is the full blown M12 fuel and kind of the baddest of the bad when it comes to the 12 volt
side of things, especially for Milwaukee. And that is the hammer drill driver and the impact driver
in the M12 fuel dress out. So this is giving you max power, right? So if you're looking at 350
inch pounds right here, you're looking at 400 inch pounds there. So not a huge chasm in between those
two. As far as RPM goes, 1550 RPM. Same thing as this one. Two speeds, two speeds. Hammer drill mode,
not hammer drill mode. And we get a half inch chuck on the M12 fuel version. So if you're
needing to step up to those larger bits with that half inch shank, then by all means it's going to
be on the M12 fuel platform for you. Otherwise, you may be fine stepping down to this one. Again,
you can get a longer runtime if you're buying a kit. By the way, you can get this kit. I believe
this kit here with the M12 fuel impact driver and the hammer drill driver with a 4.0 battery,
which is going to be the XC style battery and a 2.0 battery. And I believe that kits $229. So say
230. So 150 to 230, you may say, well, that's only 80 bucks. Well, that's really more than 50%
of the actual cost of the smaller kit. So that is a substantial jump in price. But again,
if you're needing it, and then let's talk about the power of the impact driver, we're looking at,
you know, 1100 inch pounds of torque on the subcompact unit and on the full blown M12 fuel,
we're looking at 1500 inch pounds of torque. So that is quite a bit of a jump, you know,
300 and something inch pounds more for this one. And then RPM is going to be 3600. So 600
RPM more, and you get multiple modes on this as well. So you can see you've got three different
speed modes and an auto mode for driving screws as well. Now we get the three LEDs here on the
front of the M12 fuel tool and on the subcompact, you get the light here below it. So those are
things that may sway you to the larger, more powerful kit. At the same time, if you're somebody
that's wanting that maximum efficiency, you can see here when you compare these two, it is a bit
smaller. Now as far as tip to tail, that's not a huge gain. You know what I mean? You're probably
knocking off a quarter inch, maybe a half inch. When it comes to the body of these,
you know, we're looking at two inches on the subcompact and just over two inches here.
So again, you're not really slimming down that much. Now, obviously with the 2.0 battery on there,
which let's just kind of compare this again, height kind of equals out right there. So
really, I think the real standout feature here is probably on the value or the cost side.
If you're needing the power, then by all means, spend the money. If you're not needing the power,
then as far as size goes, you know, you're definitely going to be cheaper on the money
and a little bit smaller when you go to the subcompact unit. But at the same time, you're not
gaining a whole lot of efficiency space when it comes to stepping down, if you will, to the
subcompact unit. So I really do think this is a price game on this one. Usually I think there's
a lot of value built into, you know, the differences in tools. When it comes to this
combo kit here, that's really hard to say. Warranty on this five-year and two-year. So
five-year on the power tool, two-year on the battery, same thing with the fuel platform as
well. So if you're trying to make a decision on these two units, it's do you need that extra power
and how much money do you want to spend? And that's what I would look at. If you're already
in the M12 platform where you already have lots of batteries, things like that,
again, I don't know, you know, with the subcompact kit, you're getting two of the
2.0 batteries and with the M12 fuel kit, you're getting an XC 4.0 battery and a 2.0 battery.
So that may make more sense just to upgrade in the power or in the capacity of the batteries itself.
I still think this is a great platform that they're offering now, but again, you're getting
at that $150 range. I think that's brilliant to be under that $200, but who knows? We may
see that creep back up to that $200 range as well. And these may creep up to $300 again,
but here recently, I believe I've seen, not only do you get this for $229, the M12 fuels,
but you also get a free tool option as well. When you go to checkout, you can actually choose a
free tool. Now, I know you're going to ask, so we'll just go ahead and take the two impact drivers
and let's make sure that we've got equal batteries in here. Both of these are down,
so let's swap these out. So full battery on this M12 2.0, M12 CP 2.0, and full battery there as
well. Use the same Milwaukee bit, one handed input on both of these. Oh no. Okay. So here on the
chuck, it does require you to pull that out on the Milwaukee. You do not. So you don't have to
pull that ring out to insert it on the M12 fuel. On the subcompact, you can't just push it in. You
actually have to pull that lock ring out. So if that matters, then there you go. There's another
feature. Okay. So we're going to have the M12 fuel on the left-hand side, the subcompact on
the right-hand side. And I will do my best, have it in mode three here, and this one don't have a
mode, just pull the trigger and go. I'm going to do my best to make this as even as possible. One,
two, three. Reset this. All right. Take four. So I will say there's definitely a feel
in power difference there in the subcompact versus the M12 fuel.
And we'll run that once again, just to see this. So yeah, a little bit of speed and power difference
between the fuel and the subcompact, but still able to do the job. And I don't think you're
buying this to drive three inch deck screws. If you are, I would not recommend it. I would
recommend getting an M18 impact driver. Okay. Now we've got the three-eighths. All right,
let's try out the drill. We've got it locked out in the clutch, locked out in drill mode.
We're going to try it in speed two. We've got a one inch auger bit here, self-feeding auger bit.
We'll see if it'll get through there and how fast it will. And then we'll go down to speed
one if it won't do it. All right, here we go. Okay. We'll shift to one. Okay. Not exactly
liking that. So if you're needing to drill one inch holes with self-feeding auger bits,
you'd probably be absolutely fine with a paddle bit. But with one of these self-feeding augers,
it's going to twist you up pretty good without having that auxiliary handle. We're going to go
in speed two on the M12 fuel. Well, I just found out why we're having an issue. Looks like we got
finished nails in there. So yeah, several of them. So let's just try on our three quarter inch boards
right here. Speed two. Now that we've dulled our bit with our finished nails and lock that out.
Speed two. Still not liking that. So again, kind of power shining through on the M12 fuel if you're
needing to hog out holes like a one inch drill. Could you get through it? You need to make a,
you know, drill a hole through a two by four once in a while, then absolutely great. If that's a
thing, probably really neither one of these is the go-to for that because an M18 and an 18 volt
would have no trouble with a self-feed one inch auger bit drilling that through. But just kind
of giving you an idea of the power and the difference between those two.
