In this video Josh uses the NEW Milwaukee Fuel Rebar Cutter M18 FRBC032-0X. Head to head testing against M18 FSAGSVO125X Angle Grinder (4933493552) and 14" Bolt Cutter (4932464827). Which is best? Which is faster, which cuts cleanest? Is it worth the money? Lets find out!
Key specs of this machine: Powerful rebar cutter with unmatched user protection and productivity Fast & clean cuts in up to 32 mm rebar or threaded rod and flush cuts up to 3.0 mm to the surface Cold and low sparks cuts with specially new developed cermet tipped blade (4932499702) Tool-free blade and guard access, min. 50% faster blade change compared to competition RAPIDSTOP™ for fastest disc brake in less than 1 seconds and best user protection Cut-stop technology, the tool shuts off automatically after the cut for increased user safety ONE-KEY™ tool tracking & security offers a free of charge cloud-based tracking network and inventory management platform for your tools. ONE-KEY™ also features a remote locking functionality Three position anti-vibration side handle for best accessibility Sparks collection bag for a clean working environment Non-lockable safety paddle switch to prevent automatic start-up LED lights up your work area for better visibility Flexible battery system: works with all MILWAUKEE® M18™ batteries #machine#tools#Powertools
So in front of me,
I've got Milwaukee's brand new M18 rebar cutter.
And in this video,
we are going to put it up against a standard angle grinder
and a set of bolt cutters.
Are they safer?
Are they cleaner?
And how much quicker are they to use?
So let's roll the video and find out.
So this tool is designed for the construction trade.
Now it's safe to say these are a real investment.
And hopefully in this video,
we'll find out if they're worth it or not.
Now we have got varying rebar from 25 mil
all the way down to eight mil
to see how this thing really competes
against the other two options.
What a beauty is the M18 FRBC 032.
32 standing for 32 mil cutting capacity.
So this will cut 32 mil rebar.
Right, let's fit the blade on.
So two little knobs on the casing
that then allows the case to open like so.
Allen key is stored on the rear of the handle.
If you then take your Allen key and lock your motor,
undo the little bolt there in the center,
take the little cup out,
and then the blade will actually only go in one way.
So use the white marker there on there,
obviously, because you've only got one direction
of cut rotation on this machine.
Back in with your little collar
and then do up your bolt in the center.
And then obviously put the cap back over
and do up your two knobs.
And it is as simple as that.
It comes with Milwaukee's PowerState motor
delivering up to 2000 RPM.
It's wonky enabled,
so you can link it up for tool tracking,
locking, and other machine benefits.
So you can also change the anti-vibration handle position
to three different points on the machine.
You have a handy LED light fitted to this machine
if you're working in dark environments.
There's a tool tether point
so you can safely work from height.
And like most of the Milwaukee metalworking tools,
it comes with a handy filter screen,
which can be removed and cleaned out.
For increased safety, you have rapid stop,
which stops the blade within one second
of de-triggering the machine.
So you can also fit a spark collection bag,
which aids for a cleaner environment.
We have a cut break function,
which we'll show you later in this video
and how that works.
And Milwaukee have specially designed a blade
called a Cermet blade for this machine,
which produces cold and low sparks.
And this machine will cut
imperial size five rebar in two seconds.
That's 15.875 millimeters in new money.
Right, we've seen the features,
let's do some testing
and let's bring on the contenders.
Now, I'd like to say we got three different corners,
but they are all red tool.
So in the red corner, we have a grinder.
In the other red corner, we have the rebar cutter.
And in the third red corner,
I have my own personal 14 inch Milwaukee bolt cutters.
So we'll start off with the eight mil rebar
and then work our way up to 25 mil,
because I don't think my bolt cutters
are going to take the biggest size.
And if they did, I think I'd have to be like Hulk.
Now we'll see how fast they are,
how safe they are to use,
but also for cleanliness,
we could cut some M10 threaded bar
to see if the nuts will go on after we use each machine.
So let's set up the eight mil and get going.
Right, eight mil rebar with the bolt cutters,
three cuts, let's go.
Let's get in there, get in there,
get in the teeth of it.
There's one bit.
God, he went off with a twang.
There's two.
Three.
That was hard going.
That's probably a limitation to those 14 inch bolt cutters.
Right, so you can see by using the bolt cutters,
obviously it sheared the rebar off.
Certainly not a clean cut.
And it isn't going to be the safest option
because those bits just went flying everywhere.
Right, eight mil with the angle grinder.
And the angle grinder is leaving a little bit of burring.
Obviously it's hot to touch as well.
And there's quite a few sparks coming off of it.
Right, eight mil with the rebar cutter.
There's hardly any burring,
no sparks at all, and it's cold to touch.
Now we can already see how much quicker this machine
is over the other two processors.
But just one thing to mention as well,
you've got this guide plate down here
which you can actually adjust in
to make the machine sort of safer to use as well.
So you can open it up to obviously
your 32 millimeter measurement
and you can bring it in really close
for smaller rebar as well.
So I think we can all safely say
these 14 inch bolt cutters have found their limitations.
Okay for smaller rebar,
but getting into the bigger stuff
certainly going to be a waste of time.
So we're going to put those down.
I mean, you might have bigger pairs
that would obviously cope with the bigger sizes
we got here today, but those,
let's put those away and we'll move on
to now some 10 mil rebar
and put these machines through their paces.
Angle grinder on 10 mil rebar.
Now the Milwaukee rebar cutter on 10 mil rebar.
Boom!
That rebar cutter is mightily impressive.
Right, 16 mil rebar now.
Lovely.
There is literally no heat coming off that metal
from cutting it with a rebar cutter
and look how clean a cut is given.
So I suppose when you get up to this sort of size,
25 mil and above, this is the sort of stuff
you use in construction trades
for sort of metal pilings to support concrete
because there is a lot of material and meat in this rod.
And yeah, we're going to use the angle grinder first again
and then we'll move on to rebar cutter.
Look how smooth and clean that cut is.
That is so cool.
Compared to using an angle grinder,
it's like chalk and cheese.
And I couldn't even complete me third cut
on me 25 mil rebar with this one
because me angle grinding disc,
I got that low that it wouldn't physically
cut all the way through.
So there's a real positive
with going for something like this
because that blade will just last for,
well, ages I suppose, ages and ages.
Cause it's not a blade that wears away like this
cause you've obviously got a tipped blade.
I really like that.
That is a cool bit of kit.
Now I can see, you know,
why it would have the price tag that it's got
because obviously it is designed for those specialist trades.
It's not designed for someone to, you know,
pick up and do DIY at home to cut an odd bolt.
But yeah, that is seriously, seriously impressive.
Now I mentioned at the beginning of the video
about how clean a cut it all gives.
So we're going to now cut some M10 threaded bar
and see if we can thread a nut on the end of these
to yeah, see which one's best really.
So we've just got some mild steel
and hopefully we can cut it with the bolt cutters
cause obviously it's slightly softer
so just to show you that obviously
the nut does go on the end of the thread.
There you go.
Right, so bolt cutters first
and then angle grinder and then the rebar cutter.
It's going to go.
There she goes.
Will the nut go on?
No.
It's the simple answer.
Completely buggered up the thread.
And now with me tiny little angle grinder disc,
will the nut go on?
No.
Now I'm hoping the rebar cutter will do it.
Looks a damn sight cleaner.
Look at that.
So I think those tests have certainly proved
that this machine is an absolute game changer
compared to what you probably use to cut rebar now.
I picked up the nuggets and that is still warm.
I cut that about five minutes ago with the angle grinder.
Whereas this one here, which I cut what?
A couple of minutes ago, it is cold.
I can hold that in my hand.
No problem at all.
That machine certainly cuts faster.
It is certainly cleaner and it is certainly safer.
So if you are in the construction trade,
that is certainly a machine you want to check out.
And before we finish the video,
let's check out that last feature,
that cut break system control
and actually see how close we can get to the surface
while doing a cut.
So the cut break system on this tool works like this.
As soon as the blade finishes its cut,
it then senses it and it will stop the blade straight away
without having to release your fingers off of the trigger.
So just trying to cut break system on
is as simple as pressing that button there.
So it stopped without me releasing the trigger.
Good safety feature.
Right, let's see how close it can cut to the surface.
So as you can see, it will cut three mil
to the surface of the material we're trying to cut,
which is pretty good.
It's going to be better than an angle grinder,
which you'd have to go in at an angle
and certainly better than bolt croppers.
Now, when it comes to this machine,
we're probably all on the same page.
It is a sound investment for the right trade,
but for your general DIYer or someone at home,
this is not going to be a machine for you.
These two are going to be better options
for cutting the sort of smaller stuff
or obviously larger stuff, the angle grinder,
but efficiency-wise, time-saving, longevity,
that blade over this one, completely different.
Second to none, this machine.
So that is the new Milwaukee M18 FRBC032 Rebar Cutter.
I think it's an awesome bit of kit.
I think Milwaukee have done a great job with it.
We're Machinery Nation and we bring you product videos
every week, all about tools and machinery.
If you like this video, please subscribe,
ding the notification bell,
and let us know in the comments below
if you've got any specialist tools, any brand,
it'd be good to know what you've got.
Anyway, we'll hopefully see you in the next one.
Cheerio.