Is Hyper Tough Legit? New Brushless 12v Tools Tested

Gadgets Tools
5 followers
Hyper Tough recently refreshed a few of their offerings with NEW more powerful Brushless Models - so It's time to ask if they are worth looking at, or if you should once again ignore them?
#machine #tools #Powertools
Hey YouTube, welcome back to Tinker Tools.
Tonight we're going to be talking about a budget brand
that seems to be making a big push
towards a more performing tool.
So let's go ahead and get into that on Tinker with Tools.
Now I'll be the first to admit that oftentimes
the tools that I'm using for the job
are probably a little bit overkill
for the work that I'm doing.
And I could likely get by
with a more budget-friendly option,
but I'll never fault someone for using the tools
that they enjoy using.
And so if you enjoy using more expensive tools,
that's up to you.
But if you do want to save a buck,
I do think that it is important to recognize
what budget-friendly options are out there.
Well, one of the stores
that I've never really taken a look at is Walmart.
And over the years,
I just don't think that their tool options
were all that great,
but they do seem to be making an effort
to kind of legitimize their tool selection a little bit,
seeing a big push recently from the brand Hyperchuff.
And lately they've been releasing
new brushless models of their tools,
including some of the 12-volt tools
that I have in front of me today.
So what I want to do is go through what these new tools are,
kind of talk about how they differ
from the previous brush models,
and then we're going to do some testing
and even comparing them against a more professional brand
to see how they stack up.
But first, let's talk about the tools
that we actually do have on the table today.
Now I picked up three new kits this week,
but the first one I'm going to talk about
is going to be the 3 1⁄8 inch drill driver.
Now I did actually own the previous brush drill driver
that they had in 12-volt.
It was a single speed at just 700 RPMs
and only had like 120 inch pounds of torque.
But overall, kind of some of the things
that really stood out about it
was it had a plastic non-ratcheting chuck
that just made it feel almost difficult
to get it to tighten down on the bit at times.
Even though it was only $30,
it felt like something you'd use more in a pinch
versus a tool you'd buy for actually dedicated use.
Now, right out of the gate,
this new two-speed model feels a bit different.
Gone is the plasticky non-ratcheting chuck
replaced by this ratcheting all-metal chuck.
Then you also do have two speeds on here
with top speed getting all the way up to 1600 RPMs,
which is a definite improvement.
Additionally, this one now has a claimed output
of 370 inch pounds of torque.
But the best part of all of this is right now,
the price on this thing is $3,288.
And for $32, I can think of a lot worse ways
to spend that money than what you're getting,
at least on paper.
The second tool kit that we did purchase
is going to be the impact driver kit.
And I should have mentioned this with the drill.
Both of these tools came standard
with a 1.5 amp hour battery and a charger and then the tool.
I don't have a frame of reference for the impact driver
because I haven't actually owned the brush model,
but that one was down at 2,400 RPMs
and only 880 inch pounds of torque.
So now with this one, they're actually claiming 3,000 RPMs,
which is a nice step up from that old one.
And then also 1,380 inch pounds of torque.
So pretty substantial gain on the torque figure
of that tool as well.
Now this kit is a little bit more money right now.
It's about $38 when it's on sale and it's about $49
when it's not on sale.
Now, the one kit that I actually purchased
that we're not going to be testing today
and has actually already started the return on is this.
This is going to be what I thought was a brushless tool,
but in fact, this is one of their older brush tools.
This is what they're calling their three-in-one
cordless drill.
And as you can kind of see on the box,
or I'll get you a closeup of it,
it actually does have a couple of different chucks
or attachments that can go on it.
So right off the bat, this caught my eye
as kind of an installation drill driver competitor.
And definitely at the price I paid for it in the $30 range,
if you could get something competent there,
it definitely would be a little bit better.
But this tool is definitely one of their older tools.
Now I thought initially this was actually some sort
of kind of quick release collet or something,
almost like it's on the impact driver,
but this is actually just a piece of rubber
covering the regular kind of little attachment point
for the other drill attachments.
After I realized my error and not realizing
that this was not one of the newer brushless models,
I made the decision to send this back.
So just be kind of careful when you're buying tools
on their website.
They do still offer their older brush models
and in store as well.
And so just make sure if you're buying,
you're getting the ones that you want.
And I may steer clear of some of the older brush tools
based on previous experience.
All right, so now let's go on to the testing.
Well, I've decided we're going to be doing a handful of tests
and we're going to be testing both on the included kit
battery for the drill and impact driver.
But then I also picked up
one of their $25 four amp hour batteries
because I've heard not the best things
about the included batteries performance.
And so I want to see if these tools kind of come alive
up on the four amp hour battery a little bit more.
Now, just as a point of comparison,
I am going to be running these
against the latest generation of Milwaukee fuels.
And I get that this is not necessarily a fair fight.
The Milwaukees are substantially more money,
but I do just want to provide a point of comparison
to show how close or far away
these tools are getting in their testing.
let's go over some of the good and the bad results
that I did notice with these tools.
First off, I want to talk about the impact driver.
Right out of the gate,
it picked up a very surprising win for me,
beating the Milwaukee impact driver
when it was on that two amp hour battery.
I don't honestly often run that impact driver
on a two amp hour.
I at least go with that 2.5 high output,
but because it wasn't included in the kit,
I decided to go with the standard two amp hour battery.
The HyperTough actually though,
although it did see some improvement
when I moved up to that four amp hour battery,
which you saw in the 1.5 was honestly not that bad.
Now, as soon as we put the Milwaukee
on the larger capacity battery,
you obviously saw that impact driver
come alive a little bit.
And that's where it's important to remember
that this is a $38 kit right now.
And that Milwaukee, even on its promotional pricing
with that two amp hour battery is still going to be $100.
But the impact driver is certainly a case
where I was expecting the performance gap
to be much greater than what it was.
And certainly down on that smaller battery,
I did not think that the HyperTough
was going to be able to kind of show
the performance that it did.
Now, I wish I could say that the performance on the drill.
So first on the driving test,
the two amp hour was only able to do
the smallest fastener on speed two.
Everything else had to kick down to speed one.
That's where the Milwaukee drill,
even down on the smaller battery,
still delivered some absolutely incredible performance.
And it was only when you moved up to the four amp hour
battery where you're actually able to best that,
but not by that much.
Moral of the story here is the drill,
although it did improve on the four amp hour battery,
there is a bigger gap between the drill from HyperTough
and the drill from Milwaukee.
And even down on that standard battery,
that Milwaukee definitely showed that gap.
Now it obviously does get better performance
on the four amp hour battery,
but it's not like it was necessarily able to put
that much of a gap on the two amp hour Milwaukee drill.
Now that's the performance testing.
And I think if that was all that you care about,
then you can make your conclusion
about whether these tools are for you.
But I think it's worth pointing out a few other things
that I think might help you make a decision on these tools.
The most glaring point where these tools
show their price point, in my opinion,
this little tiny thing that fits in the palm of my hand
is the entire charging solution for it.
And so even on the 1.5 amp hour battery,
I noticed charging times in excess of one
to one and a half hours,
just to be able to top off how they came from the factory.
So the speed at which you're charging on these tools
is just not going to be that great.
And so I think even though you're getting a single battery
included at the kit price,
to be able to get any amount of serious work done,
you are going to have several batteries
already charged up before you start the job,
because if they don't last very long,
you are not going to be getting back up to speed very fast
with this included charger.
The other one is going to be on the trigger
and this exists for both of these tools.
Now the trigger has normal travel, I would say,
from what you're used to,
but until you hit about the halfway point in depressing it,
nothing happens until you hit that point.
There's just a lot of dead trigger before you get it.
If all you ever do is mash the trigger on full,
you're probably going to be fine.
But if you want to have any touch on that trigger,
this is definitely not the tool for you.
Now, I think it's fair to point out
that with all of those criticisms,
you have to remember the context
of the pricing that they're in.
If you can get by with just the 1.5 amp hour battery
and all you need this is for real light duty stuff,
you are probably going to be fine.
And they are going to be decent quality tools
that are definitely improved from where they were before.
But if you want true value in the 12 volt lineup,
I'm not sure that this is there quite yet
in terms of matching value with performance,
at least not for the drill.
The impact driver is kind of there,
but I think if you start looking at a competitor
like Skill, for example,
that we haven't really talked a lot about tonight,
you can get a 2 amp hour battery kit
for both the impact driver and the drill with Skill
for $50 and the fit and finish of those tools
and the performance of those tools is superior
to what you're going to be getting from these hyper tests.
They are definitely an improvement
and going in the right direction for where they are.
And if you think about it, other than Skill,
there just aren't a whole lot of budget 12 volt options
that are out there that I think are worth recommending.
So there you have it,
that 12 volt brushless tools
that we're checking out right now,
the impact driver and the drill.
If you have any questions,
go ahead and leave them in the comments down below.
Love to get those answered.
If you want to see these compared to anything,
go ahead and leave those suggestions down below
and we'll see what we can make happen.
As always, if you liked the video,
go ahead and hit that like button.
If you haven't already, please consider subscribing,
make sure to turn on notifications
so you get notified when I put out new content.
And as always, thank you for all the support.
Until next time, I will catch you on Tinker With Tools.
