Let's Talk About Bow String Silencers!

LEARN ARCHERY
7 followers
1 Video View·Jul 4, 2025
Hi, today we're going to talk about string silencers.
We're going to cover the different types that are available to archers and then talk
or actually show you how to install them here.
So string silencers, their job is to absorb vibration, plain and simple.
Whether the energy that your bow limbs are creating is not getting into your arrow,
your arrow's too light or whatever causes the leftover energy in the bow,
it needs to go somewhere.
And it's either going to be as noise or if you can get silencers on there or have your arrow,
you can get that noise down.
A few different styles to it.
There's fur, wool or other materials like that, slide on and wrap around.
And we're going to show you how to install them.
So incredibly popular is fur.
One, it looks great.
It's got a lot of mass to it but also very lightweight so not to slow down your string too much.
And how these work, where I normally install them,
the biggest thing to remember is there's no set formula of it needs to be this far down
from the string loop.
Play around.
That's one of the nicest things with these that slide over the string is you can move them
to really tune it into the bow of what your bow needs.
But I'm going to show you how we've installed these for all these.
Let's get right into it.
So beaver fur, great stuff.
It has natural water repellency to it.
Like I said, it's lightweight but also has some good mass.
I normally install my string silencers about 9 to 10 inches down from the string loop.
I know my fingers extended out is about 9 inches there so we're going to go right here.
What I did is I just, if you have a friend it's way easier,
but I just have my bow clamped down and I have a rubber band here
to kind of hold the string in place, make it easier.
Still have some give to it.
And what I do is you're basically pinching each end through the string
and then you slide the silencer through.
Not much, just a little bit.
And as you shoot it in place, it'll stay in place.
Pull a little hair just so it stays.
Nice thing with that is that holds that.
And then it's just literally wrapping around.
Now if you're uncomfortable with this or you don't have the time
or you just want it done and don't want to do it,
if you buy a bow from us here at Three Rivers Archery, we offer a bow setup service
and we will set everything of your bow up.
If you buy string silencers, your arrow rests, anything and everything with it.
So it makes it very nice and easy on you that you get your bow and it's ready to go.
Now for wrapping this, feel free to cut it short.
If you want it, you know, tight or, you know, it's too much for you there.
Again, you're putting this on there so it has something to be absorbed into.
So you don't want to go too small.
But if you have a particular look you're looking for, feel free to do it.
Cut it short.
Otherwise, I have it wrapped and when you rub on that there,
you should be able to feel that it's tight against each other.
You want that just so that it holds together best.
And then when you get to the other end, it's the same as up there.
Just a little harder because you're shorter hand.
But I'm going to let go of it for a second to split.
There's even tools we have for it, which you think I'd have one out,
but that's okay.
We're doing it the old-fashioned way.
Open the hole and flip the bow around.
Do the other side for it and then to shoot in a string silencer.
String it up and either leave it hung overnight at least.
Don't rest it on the bed or on, I'm sorry, on a tip.
You'd want to hang it up like this.
Just that keeps constant tension on there.
Or go shoot your bow, you know.
Hour or two of shooting with it strung up in there will help settle that string silencer
so it stays in place.
So when you do unstring it, it's not going to fall out.
It comes down to the wax content of your string of how well it's going to stay.
But even when I travel to hunt and I have to break it all down and wrap my string up,
I don't really have any problems with it coming out.
Sometimes I will do some clamps and just kind of clip it
to make sure that it stays in place if I'm feeling paranoid, I guess.
But once it's shot in, it should stay just fine.
All right, let's pull that out and we'll do the next one.
Comes off easy enough.
That way if you ever have to change out strings,
the string silencers can wear out.
But if the string wears out before the silencer, feel free to peel it off.
Go to the next one.
Or take it to your next string.
A little bit further there, but it's okay.
All right, our Navajo wool ones here.
They come with great instructions on how to do it.
They have them tied in the middle.
So it's just finding that.
Same thing.
Find the spot where you want it.
Separate the strands.
Nice and wide there.
And the main thing, I guess, for placement is to be
fair enough below on this Flemish twist string,
below where those thread back in.
So you're not dealing with any of that.
That's why 9 to 10 inches is about kind of standard.
But you should be below where it tapers out of the threads.
Now this one, if you feel like it's too loose,
if you don't like how much space it has,
you can take some serving material or any other string
and you can tie it on either side to tie it in.
I honestly wouldn't worry about it.
But up to you.
You know, how many twists are in your string
will be a big importance to that one.
But this one's a nice, well twisted string.
So I know it's going to be fine.
That's it.
That's how easy that one is.
Now let's pull her out.
We have these that slide on over the string.
Now these can be a little harder
in the sense that you need to
take the string off the bow.
You know what?
We'll just do it the other side.
Off the bow.
And since they slide on,
the biggest issue is getting over that hoop.
Now you can use a few different things.
I have here a red paper clip that I pulled apart and made that.
I've seen it do out of the ladies hairpins and that.
Anything you got that's small,
that you use that to get over the strands as so.
And then because this is hopefully small
and some silencers will come with an installation tool,
which is really nice.
Slide that over it.
Or now I can start to see the other end there.
And using a pair of pliers.
This one's a lot easier with friends.
I'll tell you that.
They are nice because once they're on the string,
you can slide them around a bit.
They hold their position well,
but you can slide them around a bit.
And I try not to use the paper clip too much,
just to really just that little bit there.
And then something that's not putting immediate pressure on that loop.
Like that.
You can install both on this side and slide it down
if you didn't have string knock, I should say, to it.
But just do that to both sides.
Slide it where you want it to go.
Depending on the material they're made out,
like I said, they should hold their position very well,
but you can play with it wherever you want.
Come off a lot easier than they go on.
All right.
And last but not least, we have cat whiskers.
Now cat whiskers, I find to be probably the hardest to install.
But they are, I mean, they've been around forever.
I've used these on bows since I was a kid.
So what I do, I guess I should walk through the steps here.
I fold them in half and cut them.
And I'm definitely rusty on installing these,
so please bear with me there.
We got our bow set up, strung clamp down there.
You go down about the same distance as it was before,
maybe a little further.
Again, wherever you'd like to be.
And you wrap it around there.
I have them folded together, so it's doubled up.
This is what helps give it a nice round look to it.
We'll keep the place best we can.
And then using, what we use here at the shop are
some of these clips on each end to make it easy.
And then I have a piece of serving string
and two aluminum arrow cutoffs.
What you do is, it's pretty simple.
Find the middle for it.
Cross over and wrap one, two, three times.
Put it down to place.
And then having this, having a lot of tension
is what really, really helps.
So we got our three wraps there
and then we're just going to pull it nice and tight.
Okay.
Now with that done, take your scissors, cut these.
Now use a lighter just to seal that down there
so it seals in place.
You can also use, if you want, glue or anything else there.
Just be very careful you don't burn your cat whiskers.
Okay, didn't move too much where we want to be.
Now this, you can do a few different things.
You can pull them and cut or you can just pull them apart.
You can shoot it in at this point.
There.
A little bit more than pull apart.
And with it, you can trim it too.
Trim it shorter.
That's a little bit bigger but that'll do the job for us.
And that's it.
That's how to install the cat whiskers for them.
Again, string silencers are great.
They absorb any vibration that's left over in the bowl
to help kill noise.
You know, the goal is to tune to where you don't need a lot of it
but they also add a lot of style and good look to a bow.
If you have any questions about string silencers,
please comment below.
If you like the video, please hit that thumbs up.
If you really like the video,
please hit that share button to share with your friends and family.
I'm Johnathan Karch with 3Rivers Archery.
Thanks for watching.
