In this series, we are in Machida, Japan where we are participating in a new Japanese house build. The house design is based on a very traditional Japanese building style. The architect, chose a more classic design with his client and utilized a lot of natural land features to help increase the comfortability of the house itself. The positioning of the house along side a hill provides cool air during the summer months and a protection from too much loss of heat during the winter months. It is difficult to juggle the somewhat extreme climate fluctuations in Japan. The hot and humid summer months and cold and dry winter months are equally as long and difficult to comfortably adjust to.
The house has a two stories with the common living area situated on the first floor. The 1st floor has a large 12.5 tatami great room and a dining, kitchen, and tea area are adjacent to the large great room. Also downstairs is a full bathroom with the toilet room separated. There is an outdoor terrace space that faces the hillside which will provide cool and shade during the summer months. The second floor is available space for rooms or storage. This house is designed for communal family living where all members of the family will reside in the same room.
In Part 3 of the House No. 2 build, we are continuing the raising of the timber frame from the second floor to the roof. We also break away and take a short tour of the house showing some of the unique features in the design. This house incorporates features found in a rural thatched farmhouse and also a Machiya (町屋) or townhouse commonly found in Kyoto.
This is day three on the Murakami house and as you can see behind me they're
almost all finished with the framing. They are doing the the roof rafters and
these rafters are so beefy. From what I understand they're actually not very
traditional this style of roofing because it's normally a lot thicker but
these beams are probably about 90 millimeters by 90 millimeters and they
have a special joint to join them together. Because they're working so high
up they can't have the joints come in horizontally. They have to do it
vertically and so this joint is particularly easy for that because all
it is is you put it in place and you can stack the next one right next to it and
just keep working down the line and that joint is called the Okake Daisen Sugi.
So it's it's actually kind of a cool joint to look at. What I'm amazed about
today is this is day three of the build and they're pretty much done with the
entire framing of this house. So we're gonna walk through the site and I'm
gonna point out a couple things about this this build. So one thing about this
build everything is set on a stone which is very traditional in Japan. There's
nothing protecting the bottom of it but this slab is quite high so you're not
gonna have any water coming in. These beams are about 135 millimeters by 135
millimeters. It's quite thick. This part right here is called the Ashigatame
which is the I guess it's the footing beams for the baseboards. But these
are 180 by 120. I mean these are rock solid. It's incredible how much wood is
going into this place. This right here is called the Tori Niwa which is actually a
almost like a breezeway where you're gonna get cold air coming in and the
reason why there's such cold air coming in is because we're along the
mountainside and the air will come off the mountain down through the house. So
during the summer it's gonna stay relatively cool in the home which is a
nice feature. So the architect really thought about the geography of the area
and also the natural flow of wind into the space which is very typical of
Japanese style construction. So if we go down the Tori Niwa you're gonna be able
to see the rest of the house. Over there is the kitchen or this is the bathroom
the Ofuro. Walking this way this is gonna be a very large tatami room.
These posts right here are just temporary supports. They're gonna go away
eventually and then they're gonna have tatami mats all over the floor. So you
can see how big this space is. It's massive. You have another really large
space right here and it's I don't know how many tatami mats there's gonna be in
this room but these two rooms are connected. So this right here behind me
this big opening which is quite big compared to a Japanese house this is a
front door entrance. You can see how tall it is and the owner of this house
actually wanted to design it kind of like with a little bit of a Kyoto aspect
and this floor is opened up right here. There's no concrete below my feet but
this is where they're gonna put some stone flooring. The architect didn't
really recommend it because the stones get kind of cold during the winter but
this is what the homeowner wanted. So you're gonna walk into the space this
way. Right when you walk in you're gonna see your kitchen. You're gonna see the
great room or the living room. You're also gonna see this beautiful pillar as
you walk in. This is kind of a showpiece. I mean this pillar has got to be what
maybe six meters seven meters tall. It's about a half meter in diameter and if
you keep walking into the space and if you look up you're gonna see all these
maruta which is the circular beams in a Japanese house and you can see all the
They used a chona to make that pattern on the wood and it's a very traditional
style detail in a Japanese house. Another detail of this house is the stairs. This
is gonna be kind of like a spiral staircase that's gonna go up to the
second floor where you can get into separate bedrooms upstairs. These are
called nuki in Japanese. Basically it's a horizontal supporting beam within the
walls kind of like a stud but a horizontal stud and these are a bit
bigger. These ones are actually about 150 millimeters which is not common in a
Japanese house. So the architect actually specified a bigger nuki for earthquake
prevention or earthquake protection and one thing that should be noted in a
Japanese house traditional style Japanese house is these nukis they are a
mated pair so they are butted up against each other so this one is pushed
up and this one is pushed down and you have a space here and a space here and
traditionally they use what's called a kusabi which is a wedge and they'll
smash a wedge into there and they'll smash a wedge into here and it gets it
really tight against here and supposedly as an earthquake happens and this house
starts to shake those kusabi or those wedges actually get tighter and tighter
into that space preventing the structure from falling apart. So these are called
kusabi which is just basically wedges. One side is 90 degrees and the other
side's on an angle and depending on the nuki size and this whole spacing they'll
change this angle to whatever it is. I'm gonna show you a demonstration of the
kusabi. I'm not gonna hammer it in because they don't want me to do it just
yet. They still have to square the house. They brought the plumb bob here today so
they actually have these beams right here that are kind of preventing the
house from going swaying back and forth. It's actually not swaying it's pretty
sturdy but what they'll do is they'll actually hammer it and they'll push it
whatever direction you need to push it to get it level and then they put
these horizontal beams or these diagonal beams here to lock it in place and then
they'll do the kusabi and then they'll take these diagonal beams off but the
way the kusabi works is you put it from one side and it doesn't matter which
side is up or what side is the lower one or the upper one so that 90 degrees is
up again is up this way so that's the only thing you got to note and then you
just push it in and dun dun dun dun dun dun and you try to keep it even right
so you try to get it so it's looking like that. Another thing in a Japanese
house that's always the same in a traditional Japanese house is this joint
right here on the floor so this is a koshikake ari. It's a common joint
found in the floorboards of a house and they have a gauge that actually allows
you to measure this joint or draw the lines for it and they normally use a
they can use a machine that will cut this style joint out using a specific
four bladed saw or they can do it with a circular saw make fine cuts and then
they use a chisel to cut the profile out. This connection is called a yatoi hozo.
It's a joint that actually goes through a pillar or a main beam to actually bind
the floorboards from two separate sides through a big pillar such as this. You'll
use a separate piece of wood that goes right through the middle and then they
use wooden pegs, these komisen, to actually lock it in place and bind the
whole system together so you're combining three different unique pieces
using this one yatoi hozo. So this joint is called the okake daisen sugi and the
way it works, how Yuji there is installing it, it's a vertical install so it's real
simple to do when you're working at height. Yuji's laughing and I don't know why.
These beams are 90 by 90 millimeters so they're pretty heavy-duty. There's these
komisen that are sticking out of the roof all along the way. It's going to be used for positioning the roof beams and it slides over the
komisen.