In this video, we are doing another Tatemae, however, this time it is for a Japanese - American family. This house is an interesting build due to its size. The rooms are a little bigger than normal to accommodate a large Japanese-American family. You will see some interesting joinery throughout day 1 of this house raising. We learn about certain joints that are more suitable due to their strength and design for certain areas of the house.
The foundation of this house is made from Japanese Cypress - Hinoki and the majority of the timber framing above that is Japanese Cedar - Sugi. All the wood in this house is naturally dried which is unusual for modern times. Naturally drying wood has a lot of benefits which most come in the way of the strength of the cellular structure within the wood. Rapidly drying wood in a kiln can create fractures that are hidden which can compromise a structure, however, when you naturally dry wood you allow the wood to develop its own cracks and also maintain its own natural strength.
This house was built with longevity in mind. With the added design aspects of larger joinery and bigger beam selection it would be great to see this house 100 to 200 years from now.
We hope you enjoy this video.
Hi everyone, we're at another site. We're doing another Tatemaya today. This is day one.
You can see behind me, we're going to be doing a two-story house with a loft.
It's a pretty big property, so it's going to be a lot of work.
There's a lot of intertwining joinery, so we've got to be careful of what we put in first
to make sure that everything lines up.
We also have a lot of queijo, which is the beams that are going to be seen by the client at the end of the project.
We have to be very careful, particularly on the first floor, because everything is going to be seen.
We have to make sure that we wear gloves because the oils from our hands will stain the wood.
We're also going to be taking care of what's called a patio.
This is going to be the first time we're going to be doing this kind of construction.
It's going to be a little bit interesting because it's an extension of the house.
Stay tuned for that part.
All right, that's good.
All right, all right.
Let go.
That's good.
It's almost there.
That's good.
That's a good size.
That's good.
There's a lot of people, but I think it's just right for a patio.
Considering the strength.
It's going to rain a little bit today, and it's going to be sunny, so I think it's going to be really hot.
I think it's going to be really hot, so the thing we have to be most careful about is injuries and heat stroke.
I want everyone to pay attention to this part.
Anyway, if you get heat stroke, you'll have more work to do in the workshop.
If you stumble on top of it, you'll fall and die.
That's the only thing that's going to happen.
I'm going to die.
But if you think it's bad, you don't have to do it.
You can take a break.
If you look down here, you'll see that this is a little too big.
I want to put this together before I build it.
And when I put it together, I want to put this pillar together, frame it, and build it.
And just like this, there's an underlayer on this side, so I'm going to put it in this pillar, put it in the pillar, frame it, and build it.
Let's do our best on the first day of building.
This is the part that I was talking about that we're assembling.
That's going to be the outdoor patio or wood deck.
They have to piece this together as an assembly and then set it on top of these threaded rods that are right here.
I'm standing next to the hashira that's going to be the front porch area of this house.
And if you notice here, they pre-installed the packing or the offset for the bottoms of these pillars.
And they drilled this hole because there's a threaded rod that's going to sit inside of this.
And they used stainless steel nails to keep this packing on.
So it's all pre-done.
Check it again.
I'm going to lower it.
Okay, slowly.
Make sure it doesn't break here.
A little more.
Okay, stop.
Wait, wait, wait, wait.
Huh?
This is loosened, right?
It's loosened.
The distance is quite different.
It's loosened.
A little more.
No, I just dropped it.
No, it's not coming off at all.
One, two, three.
It's stuck.
Okay.
Okay, stop.
A little more.
It might be better to hit this one, too.
Okay.
Who's going to do it?
Who's going to do the strategy?
One.
The strategy is on top of the pillar.
A little more.
This is three.
Four and five.
I see.
How about this one?
No, I still want to hit this one.
No, not that one.
That one.
That's pretty good.
Oh, I was surprised.
It's like this.
And if I exaggerate, it's two.
I want to hit this one.
And a little more.
I'll hit it lightly.
A little more.
Lightly.
Breathe.
I think I can do it.
One, two, three.
Check the front.
Stop.
Okay.
The last one.
There's a shadow behind you.
Okay.
Don't get stuck.
Should I go from the corner?
You can go down.
Okay, I'm okay.
You can go down.
You can't go down.
I'll go down to the water.
Okay.
I'm going in.
I'll go down slowly.
I'm in.
Slowly, slowly.
I'm in.
It's about 5 minutes deep.
About 5 minutes?
About 5 minutes.
I just need to check the width.
Wait a minute.
I need to check that properly.
The bone is 90.
135.
134.
The back of the thigh.
135 from the bottom.
Okay.
Ban-chan, can you stand a little closer?
Did you check?
I did.
Are you okay?
I think it's pretty good.
Basically,
It's good.
You can't make it too hard.
Okay.
But you can't make it too soft either.
Okay.
Is it going up?
I think it's good.
It's good.
Okay.
I'm going to tighten it.
Listen carefully.
This is outside.
If you hit it from the outside,
the inside will be damaged.
So the inside will be like this.
There's a possibility that it will crack.
Do you understand?
I want to tell my apprentice.
So,
Hit it from the inside.
From the inside of the room.
From inside.
And,
I want you to stop right before you get out of here.
I'm going to put a cotton swab here anyway.
There's no point in jumping out.
And,
If you hit it from the inside,
the inside will be damaged.
Most of the time,
stupid people take it off like this,
and damage the inside.
So hit it with something like this.
And a smaller one.
Like this.
And even if you hit it with a chisel,
it won't go in.
So if you don't have a chisel,
hit it with a bat.
Hit it with a bat.
That's good.
Hit it like this.
And look over here.
Here.
Everyone.
It's attached, right?
Look.
Yes.
Do you want me to lift your butt?
No.
It's okay.
I'm going.
Push it.
I'm going.
Yes.
Push it.
I'm going.
One, two, three.
Do you want me to hit it from the other side?
Yes.
You can still do it with your hands.
Hit it.
Do you want to hit it with your hands?
Be careful.
The lower part is going to hit.
Is the lower part of the oil okay?
The lower part of the oil.
Here.
Here?
It's not in yet.
It's not that small.
Can I hit it harder?
Shut up.
It's dead.
I'm going to pull it a little more.
Yes.
Here.
Yes.
You can act.
It's a break.
Okay.
Finally.
Okay.
Are you going to lift it?
Huh?
It's a break.
Okay.
Let's go.
Yes.
One, two, three.
Be conscious of the camera.
One, two, three.
Be conscious of the camera.
Where?
I'm going to pull it a little more.
One, two, three.
Okay.
Let's make it ring.
Hey.
One, two, three.
You're still good.
Aren't you good?
We'll stop at our nostrils.
You can keep the nose stronger.
I haven't bent the nostrils.
four, five, six, eight.
And then...
You'll be able to raise them a lot.
True.
We can still use them after connecting.
We can use it again?
We can use them again.
We can use them again after connecting.
You can raise them a little more.
The long-striped is stronger than the short-striped.
Oh, really?
Because the short-striped can be pulled out this much.
The short-striped can be pulled out this much and you can shoot a nosebleed.
The same strength, but this one is stronger for pulling out.
No, not yet.
If you shoot a short-striped here, there's only this much meat.
With the strength of this meat, you can pull it out.
If you shoot a nosebleed, all this white meat.
It's already bleeding.
The meat is already cold.
It's cold.
Let's assemble it first.
Then, let's shoot as it is.
The lower part is still attached, so it's over.
When it blows, it's like this.
If you raise it a little and hit it up, it'll break.
So, just the bottom is attached.
That's right.
Hold it down.
It's attached to this pillar and you can pull it out.
If you angle this and hit it more and more, it'll pull out.
It's a nosebleed mechanism.
The most important thing in a nosebleed is this distance.
If this distance is short, the seeds will break.
I'll make it at least 5 inches.
But in the old architecture, it was about 3 inches.
It's already broken and pulled out.
The tip of the nosebleed.
You don't have to look at it from here.
You have to raise it at the same angle as this pillar.
I see.
Mr. Koda, what do you think?
It's pretty heavy.
Will it hit?
It won't hit.
If possible, I'd like to swing it a little more to this side.
This way.
Push it this way.
Push it towards me.
One, two, three.
That's right.
That's good.
Towards me.
Stand here.
Put your feet down.
If you raise it, it's fine.
Wait a minute.
Put your feet here.
Okay, it's changed.
You can raise it.
That's good.
You have to hold it while hanging.
A little more.
Stop.
Are you okay?
I'll bring it little by little.
A little more.
Stop.
I'd like to pull it to the left.
It's facing this way.
How is it?
Is this okay?
I think it's a little loose.
I'll lower it a little more.
A little more.
Let's hit it.
Stop.
It's going down.
Stop.
I'll loosen it a little.
A little more.
Please hit it a little more.
Two more.
It's falling.
One more.
Stop.
I'll pull it a little.
I'll drop it.
I'll drop it if I hit it.
Please.
Eight more.
It's okay.
It's going down.
You can lower the ladder.
Okay.
It's changed.
It's okay.
Ready?
Will it squirt?
No it won't!
It will cut around the top!
Play!
So they're trying to make everything go down and nice and even.
There's like varying heights of gaps everywhere, so they're kind of wandering around the site
You don't want one side going in faster than the other side, otherwise you'll break a joint.
For example, this side right here, it's a bit higher.
This is seated, but this part right here is sticking up, and you can see right here, this
part is sticking up.
What you can see behind me is the progress that we've completed so far.
We got a lot going on.
We got pretty much the first floor completely done, except for the cross beams.
And you'll notice in this house, it's very unique.
There's a lot of different types of joinery in this house, which you'll see in this video.
You'll also see larger rooms in this particular house.
This house is being built for an American family, half Japanese, half American family,
so the rooms are a little bit bigger.
Particularly on the downstairs, it's a little bit taller, and it's a lot wider.
Because the rooms are wider, the beams are a lot taller.
You'll see in this house 300mm tall beams, 207mm tall beams, 240mm tall beams, varying
heights.
And it's all because a lot of the rooms in this house are a lot bigger than a normal
Japanese house.
Look at this.
A lot of people ask about this.
It's like little ninja boots.
And it's steel-toed.
It might not be steel, but it's like some kind of hard plastic.