In this video, I'll show you step by step an easy way to construct a low tunnel. Low tunnels are fantastic greenhouses for low growing crops. They are great season extension, affordable and easy to set up and take down. A great choice for something that doesn't become an eyesore!
All right, everybody, this is Ross.
In today's video, we are actually going to be building
a low tunnel today.
I'm gonna show you guys step-by-step
what we're gonna be doing, how it's all working,
really, really simply how to put these up
and how to take them down.
This is a great method, low tunnels,
of extending your season,
whether in the spring or in the fall.
You could also beef these up
and have them act as some sort of winter protection.
But in today's video, I wanna talk to you guys
about how this is so simple.
So what I've done prior to starting the video
is that I've got myself some 1⁄2 inch
by one foot long rebar.
We drove that rebar into the ground,
almost an entire foot,
and then I slid over 1⁄2 inch PVC
over top of the 1⁄2 inch rebar.
It's a really snug fit and it goes in really nicely
and it creates these hoops.
I've spaced the hoops about five feet apart.
You can go closer and make this a bit stronger
if you wanted to, in terms of the water and snow
that you guys might be seeing.
Then over top, we laid our plastic
and we've anchored it down on both ends.
We've weighed it down, we've stretched it out.
The next final step is really where all this comes together.
It makes everything kind of make some sense
and makes this thing a lot more sturdy than what it is.
So I've got myself a couple of lines here
and we're gonna make, out of this paracord here,
we're gonna be making some slip knots.
And it's pretty simple for those of you guys
never done a slip knot.
I suggest that you guys look it up
because it's such a incredible knot to know.
And we're gonna make two slip knots out of this very,
I don't know, about a foot long rope, foot long paracord.
And then we're going to basically attach this slip knot
to the bottom here of the PVC.
And the reason, the way that I'm gonna do that
is I actually have myself a drill.
I have two different drill bits here.
We're gonna drill into the PVC and then insert this bolt.
It's a half inch bolt.
You can also, if you wanted to, go even longer
and have yourself a nut on the other end.
And this bolt's gonna go in here.
We're gonna attach our slip knot around the bolt.
And then we're gonna have a longer rope
that's gonna go across this side,
go through the other end,
which also has a slip knot and a bolt.
And then we're gonna bring it back
and tie this up with another slip knot.
And this is gonna be depressed.
This is gonna really weigh this down
so that if any of the air comes up from underneath,
this paracord is keeping everything down.
All right, guys, so we're coming in here and drilling.
We're pre-drilling a hole.
And actually, we're gonna use two different bits.
And then we're gonna finally insert our bolt.
So.
So, second bit, nice and easy, no cracking in the PVC.
And then we're gonna take our bolt
and we're going to spin this around
and get it in there nice and snug.
And then I'm gonna take my slip knot
and I'm going to put this around the bolt.
Can tighten this if I want just a little bit,
because what we need to do
is actually get our longer piece of string.
We're gonna throw this on the other end.
And then we're gonna put this through the slip knot,
in between the slip knot and the bolt,
give ourselves some extra room here.
And then we're gonna come in and tighten this slip knot.
And then we're gonna basically
bring this around the other side,
do the same thing on the other side
with the slip knot and the bolt,
bring this line back around,
and I'm gonna do another slip knot on this end.
And that's gonna create the tension that we want.
All right, so I'm doing my last slip knot here.
This thing nice and tight.
Slide this over the bolt, get ourselves our other end.
This goes again, right through the slip knot.
Over to the other side, we can tighten this up.
And then we're gonna tighten our slip knot
as tight as we can get it.
All right, guys, so the last thing left to do
is actually to do a slip knot.
And the reason why I like these slip knots
is that, I'll show you in a minute,
we can really easily tighten this or loosen this at our will
making this structure really easy to deal with.
So you can see here,
all I have to do is either tighten this or loosen it
just by pulling this up and down.
We can change the amount of tension that we want
on either side.
And the last thing to do is just to put this plastic down.
So let's do that now.
So it really is this simple as just coming in here
and putting the plastic down on the ends.
And this slides over real nice and snug.
You can see there's a nice depression here,
which is making this thing real nice and tight
and not gonna blow anywhere.
And if you're really not convinced at this point
that it's gonna blow away
or maybe you wanna make this more airtight,
not a problem.
All we have to do is get ourselves maybe something heavy
like a cinder block, sandbag,
and we can also make this a bit tighter
and just a better structure overall.
So yeah, I wanna thank you guys here for watching this one.
Again, super simple, right?
Do the same thing, the whole process of taking this down,
making this very easy to set up, very easy to take down.
The benefits are incredible
and it's really not all that expensive.
So I wanna thank you guys before this helicopter comes in
and ruins my ending.
But I wanna thank you guys here for watching this one.
Check us out on Fig Boss, Facebook and Instagram.
Subscribe and we'll see you guys for tomorrow's video.
Take care.