3D Modeling a Sled on iPad | Shapr3D Step-by-Step

Creative 3D objects
9 followers
Hello everybody, and welcome to this tutorial,
how to model a snowsled in Shapr3D.
In this video, I will show you how to use a 3D scan as a dimensional blueprint.
Further, this time, I will focus on modeling
by using all the already created sketches.
As you can see, everything inside this file is named and sorted,
which will make it very easy for you to jump right into it.
This scan was created by using the new LiDAR scanner,
which comes with the new iPad Pros and iPhones,
and using the free app, 3D Scanner App.
What is very nice about this technique,
besides being built in right into the iPad,
is that the LiDAR scanner is instantly and very fast.
The downside is, as you can see, the mesh quality is rather coarse,
but everything is to scale.
And honestly, when all you want is just to quickly digitize a bigger object,
so you have a proportional scale reference,
then this is perfect.
We can export this via STL,
and then place and import it into Shapr3D.
Here you see the file where I just have the scan,
and a reference sketch.
To bring in the scan, we can go to import,
files, and then select your STL object.
We will import it via meters.
And there we have it.
You see here, imported has 227 objects,
and that's way too much.
This also includes all the scan fragments,
but all I want is actually just this object.
So, I can move this one out,
and then this folder we delete.
Now, we have to rotate this one.
I also turned all the snapping off,
so it makes it a little bit easier now to position everything.
So, you can see the top is a little bit rotated.
So, maybe two degrees.
If I look from the front,
the bottom is a little bit off,
so maybe two degrees.
We can use the grid to line everything up.
What about the front or left?
Is this rotated this way or the other way?
And this is basically how you then can reposition your scan.
And to help with the positioning,
that is the reason why I created the sketch.
This one gives me a top and bottom border,
a left and right border,
particularly here on the left.
See, there's a nice line,
and I can make sure that the edges of my mesh
are also parallel to that line.
I also have here these small distance lines,
which I can move around,
and then see on top and bottom,
does this actually line up?
And the more these elements line up,
the more then your scan is perfectly rotated.
So, we'll take a moment to position this correctly,
but then this is a fabulous way to have a 3D scan,
which we can then scan over.
Sorry, I mean model over.
So, with the scan positioned,
we can now take a look at how I created the individual sketches.
So, I could then create the final CAD model.
Before we take a look at the sketches,
let's study our scan object.
From the top,
when we look at it,
what do we see?
Straight lines left and right.
There is an arc,
top and bottom,
and inside there are straight lines.
It's actually very good to keep in mind.
From here, we can see the bottom is rather flat.
The back is flat.
It slightly arcs down,
and then the top or the front goes up a little bit,
is arced,
and this points a tick higher than there.
So, we take a look at our sketches.
What do I have here?
So, from the side,
I have sketches that define the properties.
I just highlight it.
And from the front,
I have here three sketches.
When I select them and lock them,
they create this arced surface on top,
and at the bottom,
this is linear.
So, I will hide this one moment
because I want to go back to here and explain something.
You see here, these corner points I'm highlighting,
they're all lined up.
Just here, they are different.
The way how I modeled this was,
I selected or made one sketch,
and then I made a copy of the sketch,
moved it to where I needed it,
and selected one point and moved it.
It was important that the other points never got changed.
So, here, we love this.
There we are.
Oh, I have this already.
So, let's remove one,
and then we go to here and extrude this one out.
So, I have two surfaces or shapes,
defining the side and defining the top.
How do I find now the resulting shape?
I can simply select both objects and then go to intersect.
And there we are.
Now, from the top or the bottom,
I have what I need,
and also from this side.
Very good.
Let's go to this view.
What is actually very interesting to point out
at this moment is,
you see, I only work in a half object.
Also, all the sketches,
I just only define half of the object.
The design is symmetrical.
So, why should I make the sketches
that describe the left and the right side?
I can later, after I finish half a model,
simply mirror it all.
Easy.
It's just effective working.
Further, what's pretty cool about
shelling in Shapr3D is,
I can select also curved surfaces,
and then shell it.
There.
Wonderful.
But before we do the shelling,
we have to do a lot of more work
and also round edges.
So, we go backwards.
I will start this edge
round this by 50,
and round this by 20.
You can actually click and drag the arrow
for the fillet,
or you with the pencil tap the arrow,
and then it gives you a value.
Okay.
So, I know we can shell it.
So, I will leave it where it is right now.
I'm not going to do anything else.
Let's come back to the sketch.
And you see here,
I have a small profile.
So, this line was actually offset
by three millimeters.
This line too.
So, I create this strip on top.
Why did I do this?
In my scan, you can see that
here, here, and there,
we have a small even lip that goes around it.
And then here we have a bigger one.
I'm going to show you now
how easy it is to create that shape.
So, I turn on the sketches,
select the profile,
and then I extrude this
a little bit more than I need to.
So, from here to here,
we have a distance of two centimeters.
I will explain in a moment
how I made that sketch too.
This here, we will extrude by two centimeters.
So, 20 millimeters.
It was very easy.
This line is also linear.
So, this base,
I only needed to extend by two centimeters.
Now, from the top,
that's maybe a little bit more difficult
because this is curved.
So, this sketch, which you see here,
I created by selecting this edge.
Then I went to More and Project,
and simply tapped on the grid.
That then selects the ground plane
and it projects the edge of my geometry
into a sketch.
And there we have it.
Now, this projected curve
is a little bit too detailed for my taste.
So, I redrew it cleanly.
To draw this more accurately,
what I simply did was
I selected this,
made myself an offset for two centimeters.
Then I had a perfect template
and with a new control spline,
then I redrew the shape
and tried to match it as closely as possible.
I added some lines left and right at the center,
so I could then create a profile.
Extrude, and when it intersects, it trims it.
Very nice.
Let's throw this away.
And there you see, we have now
here and here,
there and there,
and even the front.
We need more.
Maybe, let's say, 8.
8, I mean.
That looks too much.
50, 40, this is good.
And we can fillet this corner.
Same here.
And I try to match this not too big,
not too small.
So, it looks pretty good and parallel.
This arc and this arc,
if you like offsets.
Selecting both objects, we join them.
Very nice.
Here's another pretty cool thing to show.
I select both, go to shell,
3mm, and it shells it.
This shelling, however, can be a very complicated task.
I mean, shelling is mathematically very complicated.
So, the cleaner the input geometry,
the better.
Here, you can see that the result creates an interesting face.
To prevent this, I simply shell this by 3.1.
So now, here to here, this has 3mm,
and then there to there, this is 3.1mm.
For the injection molding,
this is not really a big problem.
Very nice.
So, that looks actually pretty good.
However, this is also the process
how you always go forward and backwards.
When we go back,
and you can't see this in the scan,
but the real object has actually these tracks.
So, that's a little bit of a tricky problem
to put back in when we cut actually this opening.
Then we have to go back and undo this.
It's also good when you model to always,
maybe sometimes make a copy of your design
and move it away.
So, shall something go wrong,
we always have a backup file.
Let's take a look at how we can create the track.
I created a construction plane,
just from here,
and moved it a little bit backwards,
right to where I need to have this track.
And you see then there,
I redrew also the lines from my side profile.
But instead of being perfectly parallel,
this curve goes in a little bit at the end.
So, here, and also there.
And then at the center of my sketch from here,
I drew a circle.
Because what I can do now,
is the following.
I simply select this circle,
then I select these three elements,
and say sweep.
Very good.
Let's take a look at what we have there.
From here, this is not very good to see.
So, there the surface goes back into the sled,
and also here it goes back.
And here you see,
that's actually getting very, very close.
So, it took a little bit of figuring out
how to draw this profile,
which I have highlighted here right now.
At least, when I'm talking about this,
where to position this point.
Because the goal was to make an extrusion
where the end stays inside the sled.
Okay, good.
This is the center part.
I will make a copy and move this one up.
Then, a double tap,
go to mirror,
across the sketch or the plane,
make a mirror copy.
So, we can take a look at this.
And inside the sketches.
So, this one, we need at this point now
to make a mirror too.
And we can join all the objects.
And now, I can show it.
Look at that, it even shows the track.
How awesome is that?
For stability reason,
this lip, which we created,
we want to fold down here a little bit.
Also there.
So, the whole construction will be a tick more stable.
Also there, I developed a neat trick
to create this sweep surface
and still end up with very clean surfaces.
Here, I have a sketch
that actually defines that surface I need.
And then I have another surface or profile,
which I will sweep too.
So, let's go ahead and we will select this.
Notice that here, you see,
the profile top left corner lines up with this edge.
So, we'll do whole profile
and say sweep.
Now, you might ask yourself,
why is this at an angle?
Why is this not horizontal?
The main reason is if this would be horizontal like this,
I will turn on my cut section view now,
and go to there.
It might actually penetrate there just a little bit.
So, there you see where this point is.
Now, I have to stop tapping so quickly on the screen.
Sorry for this.
So, let's go back.
So, if this would be horizontal,
then there would be the edge,
which then would be above the surface just a little bit.
The other problem now we see
is when we zoom in,
there's a little bit of an overlap.
This is all okay.
That is the reason why I created this other rectangle.
So, these two objects, I will join.
Very nice.
And let's go back to the sketch here.
I will select this.
This is not my clean up profile.
And sweep this around.
Okay, while you only select the correct edges.
Very good.
And then from this, I would like the surface to be subtracted.
So, think about this as a knife
that kind of like cleans up the outside or a piece of sandpaper.
There we are.
Look at that.
Nice and clean.
As I like to say, very good.
So, a little bit of filleting now.
That's the last thing to finish most of these tasks.
Two millimeters.
This looks good.
So, two millimeters plus three millimeters thickness
means that this should be five millimeters.
Here, here, here.
Those we could all set to two millimeters.
Five.
We can make this bigger if we want to.
So, then five plus three would be eight on the opposite side.
So, here, there, there, and there.
Eight millimeters.
The reason why I'm calculating inside and outside radius is,
now you need to keep in mind when this is the outside radius
plus the material thickness, which is three,
or in this case, outside radius minus material thickness
will result into the inner radius.
So, that's the reason why I did this calculation.
Cool.
The last object that is left is this opening for my hands.
And I just made one sketch, positioned it somewhere,
so it doesn't confuse me.
It's easy to move around.
Then I rotate this, so it will be more or less perpendicular on the surface.
Also here, to work symmetrical.
We do here, and then from this, we subtract those two objects.
It takes a moment to calculate.
This is also a little tip now.
So, you see that the calculation takes a little bit.
The main reason for that is all the fillets I added.
So, ideally, what I should have done first is maybe add a fillet,
like all those I added here.
But when I'm not really done yet, I should have removed them.
So, when I then go ahead and do these calculations,
it's faster for the software to calculate.
Not simply because the fillets add more surfaces,
makes everything more computational intensive.
I will select those four edges here.
The material thickness is three millimeters.
We want to fillet it at least 1.5 millimeters.
See if this works.
This would make a nice and round fillet.
Could also go 1.2.
So, it's a rounded edge with a small flat strip in the inside.
And there we have it.
A very nice CAD model of a very fast snow sled.
