Helmets: The Sallet Pt. 1

Shield of Antiquity
8 followers
5 Video Views·Jun 2, 2025
Part 1 of our look at one of the most popular medieval helmets of all time: The Sallet. In the first part we'll look at the sallet's origin, it's spread through Europe, some regional variations and a look at some later innovations.
Comments are disabled for this video.
Hi guys, welcome back. I'm Ian LaSpina and today we're going to talk about the sallet.
Hey guys, welcome back. We've got a lot to cover today with sallets. We're going to talk about
their origin, early history, some regional variations, some late 15th, 16th century
innovations with the sallet. We'll take a step back, look at some of the rougher sallets that
are out there and of course no discussion of sallets is complete without a discussion of
bevers. And then finally we're going to take a look at this beautiful reproduction of a sallet
made in the late 15th century German style. Let's get started. So the exact origin of the sallet is
a little bit difficult to pinpoint but most of the evidence points to late 14th century, early
15th century Italy. The first time that we actually see written reference to this style of helmet
comes in an armory inventory belonging to the Gonzaga family of Italy dated 1407 in which it
refers to two specific styles of helmets that we hadn't seen named before, specifically the
celata and the barbuta. While this inventory is dated to 1407 there is evidence, artistic evidence
prior to this that the design of the celata and the barbuta was already underway in Italy.
If we step back to the 1380s and look at some Italian artwork here we see an example from the
silver altarpiece in Pistoia. When we look at it we see some helmets that are typical of what we
would expect to see in the late 14th century. You've got a kettle hat kind of in the background
there and then you've got a bassinet with attached male aventail. Except when we start to look around
those typical helmets we see helmets that kind of depart from the standard design a little bit
and elsewhere on the altarpiece we see other helmets that display some of these interesting
characteristics. They may share some elements of design with the late 14th century bassinet but in
other ways they're very different. For example we don't see any indication that they are worn with
a male aventail or that they could even be worn with a male aventail. They don't have the hardware
required to attach one. We see that the cheek plates are drawn down a lot further than we are
used to seeing on a bassinet and that they typically cover a little bit more of the face.
Some of them include a little bit of a scooped tail in the back. Others have a little bit of
kind of a widow's peak that comes down over the central part of the facial opening protecting
more of the face than a bassinet would do. It's believed that what we're seeing here are kind of
the early developments of the barbuta and the celata. Beyond just the Pistoia altarpiece in
the Fiore manuscripts we also get to see kind of hints at some of these other peculiar helmet
designs. In this plate here from the Getty version of the manuscript in the sword and armor section
we see what looks like kind of a typical characteristics of a bassinet on the left
but when we look at the helmet being worn on the right again we see that kind of widow's peak design
and more drawn out cheek plates that kind of come down and swell and protect a little bit more of
the back of the neck and the sides there. Then we would start to see this early celata design kind
of spread out of Italy and start to become recognized and used in other portions of Western
Europe. By 1419 it seems that France was kind of the early adopters of the new style of helmet and
in 1419 we have an armor receipt from the Duke d'Orléans in which he receives a in the French
word for sallet is salade. So the the word that we're in English, sallet, is an English word
that's why it's pronounced sallet not sallet. It's not a French word. Salade is the French word for the
same helmet. But he receives a sallet with visor and bever. Then by 1425-1426 we start to see
the receipt of these helmets in German-speaking lands. One of the archives from Innsbruck, which
is in modern-day Austria, refers to drei scheladen which is the early German word for this style of
helmet. It's believed to just basically be a corruption of the Italian celata. They were
hearing celata. They basically wrote it down in German. It wouldn't be until the development of
German style and we start to see them refer to what you might be more familiar with as the schaller.
By 1431 we have accounts of the new style of helmet in England. In an indenture from the Earl
of Salisbury in 1431 we see written, at which time he shall have for himself and each of his men at
arms a bassinet or a helmet of steel large and of the new shape. By about the 1430s we start to see
this new shape show up in manuscript illuminations. Specifically French sources in the 1430s show us
what we would recognize as the early sallet. Some of the characteristics of the early sallet when
we look at it differ from the later designs. When you look at it you can recognize it as a sallet
but you'll notice that the skull itself is drawn down a lot lower than what we're used to seeing
on later designs. When we look at later sallets especially like the example you see here you'll
notice that the visor the lower edge of the visor is even with the lower edge of the skull.
On a lot of the earliest examples the skull is drawn down a lot further to protect the back of
the neck and the sides a little bit more but the visor only comes down about halfway. This allows
it to be worn with the bever which will protect the rest of the face and throat. Here's another
French example where you can see that kind of typical early style sallet being worn with a bever
but with that longer drawn down skull plate. By about the mid 15th century 1450 is when we see
the first signs of the emergence of what would be the normal kind of typical shape of the Italian
export style sallet. Now we're going to talk about some regional variations and it's important to
keep in mind that while there may be some typical characteristics of a Milanese versus a German
sallet of course there are going to be counter examples to the information that I'm going to
give you but in general these are some of the things that you might expect to see. So this is
a really good image because it shows both the older style and the newer style of sallet in
one one illumination. If we look at the mounted riders or the there's kind of a lone helmet on
the ground here on the right side of the the lower right of the image you'll see that typical
early style sallet with the longer drawn down skull and then the visor that comes down about
halfway. If we go across the image here to the lower left you'll see another lone sallet kind
of laying on the ground underneath the white horse's tail and then another one being worn on
the guy who's like face down in the dirt here in the very lower left corner and you'll see now that
instead of that longer skull you have that more characteristic visor meeting the lower edge of
the skull forming one kind of straight line all the way back but the tail is pretty short and
that's typical of a Milanese style sallet. So here's an example of an actual extant piece that
used to belong to the Kerberg Armory that I believe is now housed at the Royal Armories in
Leeds and this is very characteristic of the Milanese export style. It has a short tail the
visor the lower edge of the visor is even with the lower edge of the skull and it has a full
visor. Now when I say full visor that's in opposition to a half visor. If you look at the
example here this is a half visor you'll notice that the actual visor portion is only the lower
half of the sight. The upper edge of the sight is formed by the lower edge of the skull whereas
on the example in the photograph here the entirety of the sight is formed by the visor structure so
when you raise and lower the visor that entire assembly goes up and down. This is similar to
what we see in some armets where in earlier armets we do see some full visored armets but more
typically we'd later see half visored armets. Now it's not really until the late 1450s 1460s
when the helmet really starts to take off in popularity in Germany and at this the same time
we'd start to see the emergence of a distinctly German style. Where the German style came from
some people think that it might be taking the sallet and then combining it with the influence
of the kind of fully developed style of German kettle hat that was being worn around the same
time. This is an example of what that would look like. It's basically a very low brimmed kettle hat
with sights cut into it so that the kettle hat can protect a lot more of the face than a regular
brimmed kettle hat that leaves the face opening. But the result is this which is a more distinctly
German style sallet and you're going to notice compared to the Italian style the tail extends
a lot further is a lot more pointed than what we see in the Italian style. It tends to slope
downwards and protect the cervical spine and upper thoracic spine a little bit more
and it also includes a half visor as opposed to a full visor. It's also possible in German styles
to see typically no visor at all. So in this example here we have that characteristically
down sloping and extended tail like we saw on the previous example but there's no pivots no visor.
Instead the skull comes down in one piece very much like that German style kettle hat we saw
and then the sights are put directly into that. Going back to the example with the half visor we
also see another German innovation and that is a visor spring pin. At the very bottom on the right
side of the visor and there's an also an example here on the reproduction you have a hole in the
visor which is set up to receive a pin and there's a piece of steel on the inside that wants to spring
that pin right through that hole so that when the visor is in the down position it locks it down
and then you can press that catch and it will release the visor so that you can
raise and lower it as you would like. Another very German innovation in sallet design is the
articulated tail or what a lot of people modernly refer to as a lobster tail sallet.
So when we look at this one you'll see that it still has that extended downward sloping tail
but now it can be even more exaggerated because the tail is created from individual lames that
are articulated together on rivets. What that allows you to do is get a little bit more mobility
out of that style of tail because you can imagine if the tail is incredibly long and it's going down
the back as you raise your head that tail is inevitably going to come into contact with your
back plate if you're wearing one or just your back in general which is going to limit that
upward head movement. When the tail is articulated on rivets as you move it allows that tail to kind
of collapse a little bit so you kind of get a little bit of the best of both worlds. You get
that extended protection of the cervical and thoracic spine while at the same time allowing
a little bit more mobility out of that upward head tilt. So what you'll notice is so far all
of the sallets that we've looked at the facial protection comes in the form of the visor which
only protects to about you know just about the level of the nose. It doesn't protect the lower
portion of the face, the mouth, the chin, the throat. That's why the beaver the sallet was
typically paired with the beaver. By the end of the 15th century we start to see some innovations that
either eliminated the need for the beaver entirely to allow it to be worn in different configurations
or integrated the beaver directly into the helmet and we'll take a look at those now. So this is
one example of a fully visored sallet. This would be referred to modernly as a bellows faced sallet
but you can see now the visor itself protects much lower around the chin kind of underneath
the chin to give you more complete protection. Here's another stylistic example that retains
the articulated tail and includes a full face visor. Here's one that literally has a face
embossed on it and then here's a very kind of strange looking example to my eye anyway
a rather unique fully enclosed face design for a sallet. And then the other way that they got
around this was by integrating the beaver into the sallet itself. So this is a famous example
of a sallet made by Lorenz Helmschmid from Augsburg, Germany in the late 15th century
for the emperor Maximilian I. When you look at it in profile like this it doesn't look
too much different than a sallet with beaver but you're going to notice there's a little extra
plate in there just underneath the the pivots of the visor and now with the visor raised you can
see that that that plate kind of tucks into a groove in the side of the skull and comes down
and attaches to the beaver. And very much like late I'm sorry like early 16th century and later
16th century clothes helmet design the beaver is now articulated directly to the helmet. So what
you're going to see here this is a reproduction of that helmet in the same view as you just saw
in the last photograph and what that allows you to do is articulate the beaver away from
the lower portion of the skull to get your head in then you can bring the beaver down into place
and now the visor is able to move independently of that without having to wear a separate beaver
at all. So everything that we've looked at so far is basically the high-end sallets the stuff that
you would expect to see on on the knightly class and the gentlemanly man-at-arms but one of the
things that made the sallet so
