Leather shield armour - Part 2

Shield of Antiquity
8 followers
6 Video Views·Nov 18, 2025
Firstly - apologies. It appears I am a liar!
I made a 14th/15thC proper planked poplar heater shield and covered it with an original recipe leather/iron/glass armour system and then promised I would come back and shoot it next time. I thought of a few more things, wanted to change it and so had to come back for a second time with no shooting; hence I am a liar. However I did add a section of covering without the iron/glass layer for comparison and I did make a section of 'black gambeson' (maybe), for further tests.
Next time there will be shooting - I promise.
Comments are disabled for this video.
I said iron pot, I'll come back to that later. I never did. It's going to do something and that's
why it's really intriguing but what is that something going to be? Hi it's Todd from Todd's
Workshop and Todd Cutler here and today I'm back with my shield, the one that we put this coat of
leather on. I promised the next film I was going to shoot it, well it's turned out I've lied.
So there will be no action in this film, I'm sorry, but there will be, quite a lot of talking,
but there's a couple of points that I wanted to bring up that your comments have changed how I'm
going to approach the test, so I'm altering it and something else that I forgot to mention that I
think actually opens the gateway to something else really interesting. So we're going to do a recap
here. We have a poplar shield made in a 15th century way, so it's planked, it's glued together,
it's not plywood. Then I came across one of the comments highlighted that there's a recipe in the
Ashmolean Museum for a doublet of defence. I think it's 14th century. Now doublet of course means
coat, but in the recipe itself it specifically mentions nailing it to your shield. It says
nailing it to your shield. Now maybe that's part of the whole process of manufacturing it. It could
be a doublet because, you know, of course they made sheet steel and sheet iron into armour, so you
can, if you like, tailor garments which are stiff, so it could be that or it could be a shield covering.
Don't know, but the point is what you've got are two layers of half tan leather. Now half tan leather
is leather which is rawhide. It's put in the tannin vats and it's taken out part way through
the process. So from the outside what you've got is the soft leather, then you've got a rawhide core
and then you've got leather again. Now you stick two sheets of that together and in the case of
the recipe with ground glass and iron filings glued between the two as well and you have an
extraordinary composite armour there that you have multiple layers with different properties attached
to, well either your coat, but in this case the front of your shield. It's going to do something
and that's why it's really intriguing, but what is that something going to be? And then actually a
lot of the comments mentioned casein glue and there are Spanish recipes for gluing shields
together specifically with casein glue. Now this is not casein glue, this is a hide glue, jelly in
this case, but the casein glue you don't really apply hot in this way and it doesn't seem to
impregnate, it just doesn't seem like the glue for me. Now that recipe, great I get it, brilliant, but I don't
think it's applicable in this case. So this is a hide glue, but people said well why don't you
glue leather on here? So I've actually got two more strips of the leather and I'm going to glue
them on, the half tan leather, I'm going to glue them on without the iron filings and glass
here and then the bottom of the shield I'm going to leave bare. So we'll then cover it canvas but
what it means is wherever the arrow strikes we can compare, we can see different things, but
there's something else very important that I mentioned in the film that is actually tangential
to this, so there is a reason for this, so bear with me. When I was talking about the glue in the pot I
said iron pot, I'll come back to that later, I never did. Hi I've just interrupted today's film for
another Todd Cutler related interesting fact and today we have a broken back long sax. Now the thing
is these didn't just end at the end of the Viking age at sort of like 1066 or thereabouts, you can
still find pictures of knights using these all the way through to the end of the 12th century,
so you'll find this and loads of other similar things on toddcutler.com, but now back to the film.
Now the thing is when you tan leather what you do is you take lovely dog excrement, pure in medieval
terms, there really was a job called pure collector, so you take dog excrement and you take oak bark
and put it in a tanning pit with water and your skins and what it does is it's an enzyme reaction
that it changes the rawhide into leather right, it is actually a process, but what happens then
is that part of that is the oak bark it introduces tannin, tannic acid into it. Now that tannic acid
as any oak worker knows reacts with iron because if you have a lovely nice brand new oak table and
you leave your chisel on the top you will get a big deep black mark right across it and that is
the iron. Now you can speed that reaction up by adding vinegar to it, so actually what I've done
is I've swept the floor of my forge, mixed in some vinegar in this cup here, did it a couple of hours
ago, but the thing is what then happens is you put it on your leather and it comes out, at the moment
it's grey, I'll show you that in a couple of minutes if I remember and it will be black. So
if you're part of any of the Viking societies in the UK who ban black leather, remember easiest
cheapest thing. Now the thing is we now have black leather but that actual reaction happens between
the leather which is in the glue pot and the iron pot itself, so naturally the glue becomes black
and thick over time, it looks almost like engine oil, it really does like black treacle and that
now becomes really interesting because this one it was fresh that's why it hasn't really
discoloured that particularly, but that black glue because that's the colour it will go if you do it
in a black pot with leather, maybe just maybe that has something to do with gambeson armour as well.
Now there's an intriguing thing about gambesons, they are multiple in the case of this 30 layers
of shirt linen and it's just faced with a hemp canvas, but the intriguing thing about them is
there was a 15th century descriptor that said black gambesons. Now why would they want a black one?
Well it was more defensive, everybody knew black gambesons were more defensive in the 15th century,
brilliant, 600 years later we have no idea what they're talking about, that's history for you,
but something about black gambesons, so what were they? Were they steeped in something like pitch?
Well possibly, but that would be vile to wear, but they might have done and the thing is what
happens if you can get the pitch hot enough and they can impregnate all the layers and I doubt
you could, but if you could it begins to act a bit like fiberglass, that the linen itself is not
stiff, you back it up with something even something brittle like pitch or hide glue and suddenly just
like fiberglass you go from flexible fibers and brittle glue, put the two together, you end up
with something incredibly tough. Now there is a line of thorax which is an old ancient greek type
of armour which I believe was made in layers of linen and glue, so there is precedent, maybe that's
they did, I don't know. Now I've touched on this in lockdown longbow tests three years ago, two years
ago, but actually what I didn't do was really soak it and then I didn't press it because I think that
actually getting it really tight and really hard is going to be part of that secret, so that's what
we're going to do now, we're going to soak half of this piece and then we're going to press that half
and we're going to do our comparative error tests again. Is it going to be the answer to black
I doubt it, but will it give us something to think about? Well I hope so. So I'm just going to speed
up the process and making that obviously black if you like by adding a bit of that in there,
so that's going to help. Obviously that's not quite how it was done, I assume, because we don't know
anything at all, but like I said the vinegar is not critical to the process, all the vinegar really
does is just speed it up. So we're now going to put in our bits of leather, we're going to attach them
onto the shield just as we did before and then I'm going to let it dry and this time it is a promise
the next time you see the shield it'll be hanging up getting ready to be shot and alongside it
just as a slight side issue we'll have a look at the Black & Gamson, but don't forget if you're
interested in this subscribe, sign up to the bell notifications, turn everything, turn everything on,
come down to the websites, check it all out, it all helps. Anyway, I'll see you again, bye.
