
Defending with Past Crossbows
3 followers
Good morning.
Supersonic Reverse Tactical from FMA.
Here with a bipod and a different shoulder strap.
Yes.
The big outdoor video.
Last weekend I was shooting.
Throwing.
The first time outdoor with her.
The pure function test.
That went great.
She spun.
She threw.
There was no malfunction.
In itself.
Yes.
And now we come to
why I have to show this video first.
I just do it very briefly.
I knew about the difficulties of the Supersonic
because I have been shooting single shots for over a year.
I also dealt with the Draken for a long time.
From Jiangxing.
Same manufacturer.
Same product line.
Just a weaker model.
With a front-focused throwarm.
Yes.
And as I said, the single shot variant for a year.
Yes.
I knew that the wear is an issue.
The tendon.
And the cable.
And that the axles, cams, can cause problems.
And so on and so on.
And I actually did quite well with the single shot variant.
With the Single Red.
I paid good attention to lubrication, tension and everything.
And I thought about it very carefully.
And carefully.
And pointed.
So not in continuous fire.
Shot and came to 250 rounds.
That was okay.
Yes.
Now on the weekend.
The Tactical.
The magazine variant.
I had already shown at the beginning.
Cam distance.
After tension of the tendon in the video before.
Or in my last video to you.
Wasn't that bad.
But was still there.
So short and painless.
The results were really not good.
I actually wanted to go to 20, 30 and 40 meters.
I had to ...
Yes.
I had to keep a few conditions at 20 meters.
Because my streaks were in the range of 10 cm.
10 cm streaks at 20 meters.
I do that with a Compact and 35 rounds without shoulder shot.
So there is the claim a bit different.
So.
I also had my AR6 that day.
I looked if it was up to me.
It's not up to me.
I prepared the weapon well beforehand.
Yes.
What should I say.
There are several reasons that these streaks can cause.
It's a bit of an exclusion process.
The next thing I would do now would be to change the bolts.
And then it goes on.
That ...
Okay, hang on.
Some people work on the beams.
I've already talked about that.
And build the cams here.
And maybe correct by exchange of the gun arms.
References, visors.
Increase the riser by metalwork.
So in other words.
This weapon is a project.
I have 15 arms.
And ...
I just didn't have time for that.
Quite simply.
As the streaks are, as they have shown themselves.
I don't want to show them.
Because ...
That would be a rip of the weapon.
And ...
