Cocking the Excalibur RevX Crossbow How-To

The Technology of Old Crossbows
4 followers
2 Video Views·May 28, 2025
Cocking the Excalibur RevX Crossbow How-To
Hey everyone, I'm Jeff from Excalibur Crossbow and today I'm going to show you how to caulk the Rev-X
crossbow using the integrated Charger X crank. First, if you haven't done so already, insert
your crank handle into the crank and turn the handle three times in the decaulking direction.
What that does is takes the tension off of the braking system in the Charger X crank.
Second, you're going to release the sliding catch mechanism by pushing the full draw latch
forward. Now you can push the sliding catch down the mainframe and attach it to the crossbow string.
Once you've attached it to the crossbow string, you're going to put the crossbow into the safe
position by pulling up on that safety. Next, you're going to insert your crank handle into the crank
and start turning the handle in the caulking direction. At any point during the caulking
process, you can let go of your handle and that internal braking system will hold the
handle in that same position. Continue turning the handle in the caulking position, caulking
direction until your sliding catch has engaged with the full draw latch. Now you can turn the
crank handle three times in the decaulking direction to remove that tension from your
crank system again. Remove your handle and stow it in your stock. Now you're ready to
load an arrow and shoot your crossbow.
