How To Change the String on the Excalibur RevX Crossbow

The Technology of Old Crossbows
4 followers
May 25, 2025
How To Change the String on the Excalibur RevX Crossbow
Today I would like to introduce you to the rear Picatinny rail, which can be adjusted steplessly.
This was specially developed by us, so that you can adjust and adjust the target device, i.e. Red Dot, according to the distance.
We have deliberately used self-locking nuts here, so that the screws cannot loosen when there is a impact and the Picatinny rail may then adjust.
As I said, the whole thing can be adjusted steplessly in the inclination, so that you can adjust the Red Dot as accurately as possible, depending on the distance, whether near or far.
The assembly is relatively simple. Simply remove the rear end with a 3 mm Allen key.
The screw is replaced by a slightly longer one.
For the assembly, a correspondingly long Allen key is also ideal.
And then just put it on here and tighten the screw again accordingly.
After we have tightened everything properly, we put on the Picatinny rail and then fix and secure the whole thing with two Allen screws.
We need a 2.5 mm Allen key for the Allen screws here and do not tighten too much at the beginning, so that you can adjust the inclination accordingly, depending on which of the Adans you want to shoot.
And as soon as you have adjusted it accordingly, tighten the whole thing properly.
Now you have the option of setting up and mounting a Red Dot here.
We'll just set it up like this. This is what the whole thing looks like.
The whole thing is available in our online shop at www.cosmo-action-world.de.
If you have any wishes, suggestions or anything else, feel free to contact us.
We'll see what else we can do for the M10.
We already have a fourth Picatinny rail in production.
More precisely, this block here.
It is intended for a laser, especially the two-axis laser from Steamboat.
With the switch, although we will not use the existing switch here, but we have our own switch there, so that we can simply exchange this part.
Of course, a note in Germany, the installation of a laser is not allowed.
That means, please install the whole thing somewhere, for example in Austria or wherever you are allowed to.
And here again very briefly, this is what our rear Picatinny rail looks like with a corresponding inclination.
