Learn how to create beautiful Northern Lights-inspired resin art with this step-by-step tutorial! Artist Vonka Chez shows you how to make a glowing resin table and matching coasters using ArtResin epoxy resin and Magic Pigments.
In this video, you'll learn: ✔️ How to prep your panel and pour resin ✔️ When to add pigments for a luminous aurora effect ✔️ Tips for controlling color flow ✔️ Layering tips for creating depth and dimension ✔️ How to create a gold tree design
Perfect for beginners or experienced resin artists looking to try something new!
A huge thank you to artist Vonka Chez for sharing her techniques and tips! Please visit her website and follow her on social media (links below).
Hello guys, it's Vanka. In this
tutorial, I will show you step by step
how to create this beautiful Aurora
northern lights effect using art resin
and vonas magic
pigments. I strongly recommend following
every step in this tutorial. The right
resin, the right pigments, and precise
timing are very crucial to this
technique. I am using 18 in wooden
canvas that I purchased at Michael's
store.
Frog tape is really good to protect the
back of the canvas. I am uh protecting
only a little part, but you can follow
the steps and protect the whole canvas.
I myself will use Dremel to clean the
drips. These are my favorite black
pigments I use in my resin art. And for
this project, I'm going to use Artist
Loft. I always prime my canvases using
acrylic paints matching the color of
resin I will be
pouring. This is absolutely my favorite
resin and also the best one for this
project. Please make sure to check the
important message about the resin at the
end of this video. I always make sure
that the art is leveled. I am going to
mix the two components of resin for
about 3
minutes. And after resin is ready, I'm
going to add black acrylic
paint. I'm going to make sure that it is
also mixed well.
And after that, I'm going to add Vonka's
magic pigment called
Stardust. Just two scoops are enough for
this project to create beautiful twinkle
starry night
effect. I think I used something about
450 ml of resin to create these three
ghosters and cover this uh panel. You
can also use art resin website to
calculate how much resin you need for
your
project. I waited about 10 15 minutes uh
before I torched the
resin. Now I am ready to create the
first layer of the goat trees.
I'm using fan
brushes, mirror effect
foil that I'm going to apply on the
glue. And the glue is the same company
as mirror effect
foil. When I apply glue onto the brush,
I make sure that brush is wet.
[Music]
I apply the glue the same way as I would
paint the trees using acrylic
paints. And this technique is really
easy. You can look up for tutorial on
YouTube how to paint trees using the fan
[Music]
brushes. But if you fail doing it, you
can always use water and clean the glue
and start
over. I repeat the same steps on the big
canvas. I just apply more of the glue,
making the lines thicker and more
layered.
[Music]
I'm going to wait about 2 hours for the
glue to get
[Music]
tacky. Now I'm ready to apply the gold
foil onto the
coasters. Always remember to apply
silver part to the glue, not the gold.
As you can see, I uh have some
difficulties with applying uh gold foil
on this canvas because I didn't wait
enough
time. After finishing the trees,
everything is ready for another layer of
clear resin. I'm going to sand
everything avoiding to touch the part
with the trees of
course. After applying this layer of
resin, I'm going to apply another one
and it is going to be the one I'm going
to use for
creating the northern lights effects.
[Music]
At this moment I am preparing the third
layer of resin and I will be using this
layer to create the galaxy uh
effect. The moment when the resin is
mixed is very crucial for this part.
That's why at the moment when resin is
mixed, I'm going to start the timer to
be able to share with you every step and
the exact time when I did the step.
I'm going to leave the resin aside and
prepare the canvas and coasters for
another
layer. 15 minutes after mixing the
resin, I poured it on the canvas.
[Music]
20 minutes after I mixed the resin, I
pour it to the
cups. About 21 minutes after mixing the
resin, I torched the
canvas. This is the set of Vonka's magic
pigments used in this project.
[Music]
35 minutes after I mixed the resin, I
added the same amounts of pigments to
the cups and mixed them. A little side
note is that I never mix my pigments
close to the project I'm working on
because these pigments are very fine and
powerful and uh the smallest amount in
the air can affect the project
especially when I use black
resin. 1 hour after mixing the resin I
poured it on the coasters. You can see
how thick resin is already. 1 hour 8
minutes after mixing the resin, I
started pouring the lines and you can
see all the names of the pigments that I
was
pouring. Using a very small torch, I
gently torch the resin in order to slide
piece of paper on it to blend the
colors.
[Music]
I'm adding extra lines and every single
color I used is listed in the
video. Using heat gun, I'm blending
colors a little bit
more. Uh the paper didn't do the work
for me. That's why I used the extra
help.
This is a very good moment to add extra
lines because resin is pretty thick.
Everything stays in place. And that's
why I work at this time 1 hour, 1 hour,
30 minutes after the resin is
poured. As you can see, everything stays
in
place and it's easy to control.
I was playing about 20 minutes with this
part of uh creating the northern lights
on the big
canvas. The last uh product I applied
was his mood. I made sure that resin is
pretty thick to hold this glitter in
place.
1 hour 25 minutes after mixing the
resin, I started pouring the lines on
the coasters. Resin is super thick and
that's what I wanted for the coasters
because they are smaller than the big
canvas and they are easier to slide. The
resin is easy to slide to the sides.
That's why when the resin is really
thick, the lines stay in place. That's
why it is very important to follow the
time that I share with you when what was
done. It is important that pigments were
mixed with resin
uh
earlier because resin is too thick and
at this moment to mix any pigments with
it. Believe it or not, this is 2 hours
since I mixed the resin.
Two hours later, I'm playing with uh the
toothpick, applying
extra
details. As you can see, resin stays in
place. And you can literally create any
type of pattern you want in resin at
this moment.
Now I'm going to let the resin
cure and I will be ready to apply
another layer of the trees that I will
be using two techniques that I will
share with
[Music]
you. For the first technique, I'm going
to use Deco Color marker. squeezing the
ink onto the top of the cup. And I'm
applying lines using the
[Music]
toothpick. This will create 3D effect
because uh between the trees will be two
layers of clear
resin. My video doesn't reflect this at
the at the moment, but the effect is
really stunning.
[Music]
For the second technique, I used the
same glue and the same mirror effect
foil. I just applied way thicker lines
of the glue.
time. I made sure to wait at least two
hours uh to apply the gold foil on the
glue. Always remember to apply silver
part onto the glue, not the gold.
[Music]
Now I am ready to pour another layer of
resin. Because I waited more than 24
hours after I poured the previous layer
of the resin, I have to send uh all the
coasters and the big art. Very important
note here is not to send the glitter
that has big flakes. Any big flakes
glitter can be scratched. So avoid this
part and avoid sanding the trees.
[Music]
[Music]
After the resin cured, the next day I
realized that the trees were a little
bit too thick. So I had to u pour
another layer of resin.
I would love to share some important
information about the resin with you.
I've been working with art resin for
over six years and I absolutely love it.
Thanks to its unique qualities, I've
developed many cool techniques and this
is one of them that I'm sharing with you
today. The magic happens around 40 60
minutes up to 2 hours after mixing the
two parts of resin. But to get the same
results, it's important to follow every
step I show in my tutorials. Using
different pigments, larger resin
volumes, or a different brand may affect
the outcome. With art resin, the sky is
the limit when it comes to creating
abstract art.
I am using self adhesive cork for the
bottom of the
coasters and hair pin type of legs for
the table. Everything purchased on
Amazon. I hope you enjoyed this
tutorial.
Please let me know if you have any
questions in the comments or contact me
on my social media at vonaches. Thank
you.
[Music]