When you’re working with resin, preparation is key! You don't want to be midway through a project only to find you don’t have what you need or that you’re short on resin. You’ll have to stop what you’re doing, wasting precious time and it can really impact your final result.
Every minute counts with resin, so staying organized will keep you on track so that your resin doesn't cure before you’ve finished your piece.
Resin is also sticky - so working smart and having everything in its place and a place for everything helps keep your space clean and tidy.
In today’s video, I’m walking you through the steps to organize your workspace and plan your process—from setup to clean up—to keep your resin session running smoothly so you get the best results possible!
00:00 Intro 01:28 Plan Your Process 01:33 Plan Your Work Space 01:41 Room Temperature 01:58 Get Your Artwork Ready 02:22 Have Your Tools On Hand 02:45 How Much Resin? 03:32 Does Your Resin Need a Water Bath? 04:11 Have a Plan for Curing 04:32 Set Up Your Tabletop 04:45 Protect Your Work Surface 06:10 Plan Your Workflow 06:32 The Tools You'll Need 07:10 Gloves 07:36 Measuring cup 08:13 Stir Stick 08:36 Spreader 08:38 Stands 08:51 Timer 08:57 Colorants 09:08 Torch or Heat Gun 09:16 Toothpicks 09:26 Dust cover 09:38 Wipes 09:48 Alcohol & Paper Towel 10:03 Spot for Wet Tools 10:25 Trash Bin 10:48 Clean Up 10:58 Wipe Down Tools 11:07 Flip Your Cups
[Music]
Hey, it's Joanne from Art Resin. So
whether you're new to resin or you've
been working with it for a while, one of
the most important things to remember is
that preparation is key. The last thing
you want is to be midway through a
project only to find that you don't have
what you need in front of you or that
you haven't mixed up enough resin. you
have to stop what you're doing, wasting
precious time, and it really can impact
your final result. I know we've all been
there. So, since art resin has a working
time of about 40 minutes, every minute
counts. So, staying organized will
really help keep you on track and
prevent your resin from curing before
you've had a chance to coat your whole
piece. And as we know, resin can be a
little messy. So, working smart and
having a place for everything and
everything in its place can really help
you stay organized and tidy. In today's
video, I'm walking you through all the
steps you need to organize your
workspace and plan your process from
setup to cleanup to help you keep your
resin session running smoothly and get
you the best results possible. So, with
all that being said, let's get started.
[Music]
So, the first step when working with
resin is to plan your process out
before, during, and after your project.
So, let's start with your workspace.
Now, the size of your project or the
number of projects you're working on is
really going to determine how much space
you need. The next thing to consider is
temperature. If you're working in a
basement or a garage, is the temperature
going to stay consistent or is it going
to drop at night? Resin cures best in
warm, dry conditions, so above 75 F or
24 Celsius. So, it's really important to
factor this in. Next, make sure your
artwork is ready to go. It should be
completely dry. And if it's been mounted
to a panel or sealed, make sure you've
given the adhesive or the sealant time
to dry as well. Tape off the back and
sides if you need to mount it onto
stands and make sure it's completely
level. All of this should be done before
you even open the resin and hardener
bottles. Now, what about tools? Make
sure you have everything you need laid
out in front of you. And it's a good
idea to keep what you may need more of,
like gloves, paper towel, and wipes
within arms reach. Now, I'm actually
going to go into more detail about tools
in just a little bit. Now, if you're
working with colorants, have your color
palette already picked out because you
don't want to be wasting time choosing
colors while your resin is waiting.
Speaking of resin, the most important
part of all of this, do you know how
much resin you'll need? If not, Art
Resin has a handy online calculator at
artresin.com/calc. All you have to do is
enter the dimensions of your piece or
the diameter if it's a circular piece,
and the calculator will let you know
exactly how much resin to mix and which
kit you'll need. Now, if you're working
with molds, there's an easy way to
determine how much resin you'll need for
these, too. You can pour water right
into the mold and then transfer it to a
measuring cup. But make sure you do this
at least the day before you plant a
resin to give your molds a chance to air
dry. Now, if you're running short on
time, you can also use rice. Either way
works well. Now, let's talk about water
baths. If your resin is cold or your
resin room is cold, it's a good idea to
warm your resin in a warm water bath. I
also like warming my resin if I'm
pouring into molds because warming the
resin thins it out, which means you'll
have far less bubbles to deal with. So,
what you want to do is place your resin
and hardener bottles tightly capped in a
warm water bath for about 15 to 20
minutes. I like to use a tall, thin
container like this because it prevents
the bottles from tipping over. And
you'll also want to make sure you've got
a paper towel or a dry cloth to wipe
those bottles dry before you open
them. Finally, have a plan for curing
your resin pieces. If they can't stay
undisturbed for at least 24 hours on
your work surface, then pick a spot that
you can move them to afterwards. Working
on a tray is a game changer. It makes it
so easy to lift up your projects and
carefully relocate them without
disturbing the resin. Now, let's move on
to the table top where we're going to be
resining. You can absolutely make a
small space work as long as you plan
ahead and you stay organized. Of course,
it needs to be big enough to fit the
piece that you're going to be resining.
The first step is to line your tabletop
with plastic or another non-stick
surface. A vinyl shower curtain is a
really great inexpensive option. Now, I
know this might be a controversial take
and silicone is super popular, but I am
not actually a fan of using silicone
mats or tools. I just find silicone
really hard to clean. It's a magnet for
pet hair and dust and you get those
little bits of resin stuck on and the
only way to get rid of them is to use
tape to take them off. So, if I do use
silicone mats, I use them as a
protective layer on my table top and I
will usually cover it with a piece of
parchment paper, which is super easy to
clean, and the resin just peels off of
it so nicely. I also really like using
these cutting boards I got from the
dollar store. They're inexpensive,
they're smooth, and they're super easy
to clean. But by far my most favorite
tool I've gotten recently is this big
plastic offcut I got from a plastic
supply company. It's a big 1/2- in thick
piece of HDP plastic, which is the same
plastic they use to make cutting boards,
and it's big and solid, and resin just
peels off of it like a dream. The only
thing you need to be careful of is that
you can't use metal tools on it. So, I
use plastic scrapers and plastic razor
blades if I need to peel up any cured
resin on it. So, now that my table is
lined, it's time to think about my
workflow. Where my tools are going to
go, where I'm going to do my measuring
and mixing, where I'm going to pour,
where my piece is going to cure, and
where I'm going to do my cleanup. And
once you have all that set up, you can
even run through the whole process in
your mind a few times just to make sure
everything flows smoothly and that you
haven't forgotten
anything. So now let's talk about tools.
If you like to cook, you're probably
familiar with the term mislass, which
basically means everything in its place.
The same idea applies when you're
resining. If you have a spot for all of
your tools, it just makes the whole
process go so much more smoothly. For
me, I like working from one side of the
table to the other, usually from left to
right. So, I keep all of my measuring
and my mixing on the left. I have my
artwork and I pour my resin in the
center and then all of my wet tools go
on the right. But find a system that
feels right and natural for you. Now,
we're going to go through all the tools
that you'll need to resin. First,
starting with gloves. Gloves are a must
when you're working with resin, and it's
a good idea to keep a few extra pairs
within easy reach. You can even wear
multiple pairs and then peel them off as
needed. I like using these heavy duty
nitro gloves and I got these ones at a
restaurant supply store. They're really
strong and if they get sticky, I just
wipe them down with paper towel and
alcohol so that I always have clean
gloves. Next, you'll need a plastic
measuring cup with clearly marked lines.
I love using polyropylene plastic.
That's this frosted flexible kind of
plastic. It comes in all sorts of
different sizes, and this kind of
plastic is the secret to pulling out
resin in one satisfying pull. Now, one
thing I've learned over the years is to
always reach for a bigger cup. For
example, if you need 8 ounces of resin
and you go for an 8 oz cup, it's going
to be filled to the brim, and no matter
how carefully you stir, it is going to
splash all over the place. So, reaching
for a bigger cup can save you a lot of
cleanup. And of course, you'll need a
stir stick. Make sure you choose a flat
edge stir stick because that's going to
scrape the sides of the measuring cup
really, really well. And you want to
make sure that you match the size of
your stir stick to the size of your
measuring cup. I love our reusable stir
sticks for large volumes of resin. And
if I have a small amount, these plastic
stir sticks work really, really well.
And you'll need a spreader. And of
course, you'll need stands to place your
piece on top of. Now, you may have
noticed that all of these are made of
plastic, and that is because plastic is
the easiest surface to remove resin
from. I've also learned to keep a timer
or a clock within sight just so you
don't get resin all over your phone. If
you're working with colorants, lay out
your pigments along with enough cups and
stir sticks for each color you plan to
use. And again, it's always a good idea
to keep extras of these within reach. To
get rid of bubbles in your wet resin, a
flame torch works great for most
projects. But if you're working with
molds, make sure you use a heat gun. And
then have a toothpick close by or a
pointed clay tool like this just to fish
out little bits of dust after you
torch. Last, to protect your wet resin
while it cures, you'll need a dust cover
or several dust covers if you're
resining multiple pieces. Take the time
to test it out beforehand just to make
sure it fits.
I always keep wipes or a stack of
alcohol- sprayed paper towels on hand
for quick cleanups like for stir sticks
or resin drips, but it's a good idea to
keep a spray bottle of alcohol and extra
paper towel on hand as well. It's better
to be prepared for the worst than be
scrambling because of a resin spill.
I've also found one of the easiest ways
to keep my workspace clean and organized
and manageable is to designate a spot
for wet tools and to clean as I go. In
fact, I've trained myself not to put
wet, sticky tools down on my table top.
Instead, I wipe them off first and then
I put them down. I also keep my empty
mixing cup upright until the very end
when I'm totally done. And this helps
avoid creating a sticky mess while I'm
still working. Finally, keep a garbage
bin or even a plastic container close by
for wet paper towels, wet wipes, and
other waste. It's a really simple way to
keep wet, sticky items away from your
workspace. So, when I'm done resining
and the dust covers in place, it's time
to clean up. I always follow a clean to
dirty approach. It just makes everything
so much easier. First, I start with the
clean items. I put away my box of
gloves, my resin bottles, my colorants,
and tools like the level and the
torch. I wipe down my stir sticks one by
one with alcohol and a paper towel to
make sure there's no resin left on them.
And then I put those away. The very last
thing I do is flip my cups over, making
sure that I've got plenty of space for
any leftover resin to spread. And that's
it. I hope you found this video useful.
To be honest, I am not the tidiest or
most organized person in the world. And
everything I shared with you came from a
lot of trial and error and some really
messy resin sessions and sticky phones,
too. But once I started using these
tips, they made a huge difference for
me, and I really hope they'll help you
as well. I love learning. So, if you've
got some tips of your own, please leave
them in the comments below, and I may
even share them on Art Resin's social
media pages. If you found this video
useful, don't forget to hit the
subscribe button and we'll see you next
time. Bye.
[Music]