Don't throw out your resin coaster fails! Give them a glow-up with this easy resin pour technique!
It’s normal to end up with resin pieces that don’t go as planned, especially when you’re learning new techniques. If you’ve found yourself with a stack of resin coaster fails, don’t throw them away! With a little creativity, these imperfect pieces can become something beautiful and brand new.
Artist Rakhi Jha has come up with a creative way to rescue resin fails. She creates a brand new design with a simple resin pour using tinted resin and a hairdryer.
Rakhi shares tips and techniques for giving coaster fails a glow up with fluid art, transforming them into pieces to be proud of
Follow along and see just how easy it can be to upcycle your less-than-perfect resin coasters!
Hi guys, my name is Raki Ja. I am a
fluid artist. Today I am going to show
you one of the uses of discarded
coasters and I know a lot of us have
these at home and instead of throwing
them away I would reuse them and I would
do a separate a different design on them
and it would it it just comes out so
fabulous.
My art brand is called Moinima and I do
have a YouTube channel which I'm trying
to build up as well as I have quite a
presence on Instagram. So it's going to
be a resin pore and I am going to use
art resin. You can see that I've gone
through this bottle. I use them quite a
bit for my uh pieces and I just love the
clarity and the details it gives me. So
today this project is inspired by mother
nature by earth. I am using um a lot of
paste pigments which are available um on
my website as well. And the the colors
that I'm using today are lots of greens.
Greens and turquoise and white and a bit
of mica powder which is a bronze which I
thought would look fabulous with greens.
These are failed
coasters. I have already done a design
on this side. I'm going to show you how
to do them on this. But before we get
started on mixing the resin and the
colors in them, what I'm going to do is
just put liquid latex uh at the back of
these coasters so that when the resin
drips fall off the sides with the back
protected, when I remove the latex the
next day, the drips come off. So we get
a nice clean design even on the reverse
side. So I am going to show you a
technique which a lot of you guys may
have seen with acrylic pouring using the
hair dryer called the Dutch pore but I
do a lot of resin pores with the hair
dryer. You can also use a heat gun. I
prefer this. I feel like I have better
control and as well as better patterns
um and the design comes out better. I
need a cup. I have this with the
measuring line so that I know exactly
how to mix my resin which is part A and
part B equal amounts. This is not by
weight. This is by volume. Some popsicle
sticks. Some smaller cups for the resin
that I'm going to distribute on in these
and mix different colors. A brush to put
the liquid latex on the back side. So,
what we're going to do is we are going
to be working on this side. So, we are
going to put liquid leaves on this side.
And you don't need to do the sides
because I like the resin to actually um
pour over the sides and just fall over.
You need a blow torch, a culinary blow
torch to pop the air bubbles as well as
it helps in getting some cells. So, I'm
going to put latex on each one of these,
and then I'm going to let that dry so
that I can flip it over and start my
design. So, I waited about an hour and I
turned on the fan and it is completely
dry, the latex. So, I'm going to flip it
and let's now start mixing the resin. I
think about 8 oz should be enough for
these um coasters. So, I'm going to do
four of this, four of the hardener and
four of the
resin. There we go. And I am going to
mix this. I usually do 5 minutes. You
can do up till 3 minutes. And I scrape
around the sides as much as possible.
And then just slowly go round and round
mixing this because the more you do uh
the more air bubbles are going to get
trapped in this. The more harshly you do
it. And you can see that the resin
starts off cloudy when you mix the
hardener and the resin together. And
then when you've mixed it enough, it
turns clear. So now I'm going to
distribute this in several cups. And I'm
using one, two, three, four colors and a
base color. So five colors. And you know
what? I might use a bigger cup for the
base. I usually distribute the resin
immediately after mixing.
So, for the base, I'm going to go with a
translucent green. I just love the deep
green color of this. Um, it almost looks
black, but it's actually a green. And
when it mixes with the other colors, you
will see that the green highlights come
through. And I just put
some. This is a lighter green. It's
called pine green.
There we go. Now, let's do this
beautiful, beautiful color called
aquamarine. You'll see how beautiful
these colors work together. The white I
always put um this is ultra white uh
because it just with the other colors it
just gives more shades of white.
There we
go. And lastly,
uh it's a floating bronze uh copper
color. Uh you could use floating gold.
You could use any mica powder uh
metallic uh to, you know, I just like to
give it a little bit of an accent of a
metallic. And this bronze or copper
color, it's actually copper. looks
amazing with uh greens and whites. I'm
just going to take a tissue paper and I
am just going to give these posters
because they've been sitting around for
a while a wipe down with just isopropyl
alcohol. And I'm just going to cover the
entire surface of the coaster with this
green color.
Just with your popsicle stick, just move
it towards the
[Music]
edges. Now we do just a
quick once over with the blow torch. All
the bubbles are popping. So, let's do
one and then see if we like it and then
we do the same thing on the others.
Actually, I'm going to go with the dark
color first on the dark and just build
my way towards it being
lighter. Maybe a little bit of
white and a bit of that copper color.
And now with this hair dryer, I'm going
to do a pattern. This
And this could actually go like this the
other way
around. I have a little bit of negative
space. I just think it looks nice. So
now I'm going to just take the blow
torch and go over it. See if any cells
or any details want to pop and that
floating copper comes to the top. And
just let it sit for a little while and
then you see better details on it. And
you see how it it went down the sides.
You can just take this a little bit and
do the sides if you want. But you could
let the resin sit for a little while.
And the more you let it sit, the thicker
the resin gets and the better it is for
you to retain your design. Some of these
designs, if the resin is too thin or
towards the earlier part of its setting
time, it just blends more and the
initial design that you make sort of
moves. So that's the one we did. And you
can see the tiny cells that that came up
and even more cells that are coming up
over here. And look how gorgeous that
looks.
[Music]
Hey, hey, hey.
[Music]
[Music]
Art resin, you've just given such
beautiful, beautiful designs on these
So coming back the next day and after
pouring one more layer of the clear
coat, I am going to take out the latex
and the drips that form at the back of
the coasters so they easily come
[Music]
off. Hi guys. So this is the final step.
After you have top coated with clear
resin on both sides, you would I would
just take uh a leafing pen. These come
in different colors. I just happen to
like the gold. And then you would just
go over the
edges just like that. I hope you guys
can see it. Yeah.
This is by Deco Color. You get um Kryon
as well. And there are quite a few
brands out there um that have these
leafing pens. And then what I would do
is I would just go over the top edge um
with the same pen.
[Music]
There we go. Let's do another one.
[Music]