5 Minute Shower Valve By Hammerhead

Repair house
9 followers
Nov 15, 2026
AI Generated·May contain errors
All right, so I think I'm just gonna call this
the five minute shower valve,
because it's really literally gonna take me that long
to put everything together, maybe 10 minutes.
But this is made by Hammerhead.
This is very similar to a Delta shower valve,
as you can see with the square plaster guard.
So I'm just gonna put a little bit of Teflon tape
on all my fittings.
What I would do with the Teflon tape
is just make sure you're rotating it clockwise,
four to five revolutions, keep it flat.
And the main reason is,
When you thread the new one on.
Got the fitting on, it won't take the Teflon tape off.
Then just use a little bit of pipe sealant.
This is just gonna ensure that everything's sealed.
What we'll do is just use these 90s here.
And we got the top with the
standard female adapter.
Okay, now that's
all ready to go.
Okay, so what do you have to do on these shark bites?
Use a deburring tool.
This has a little thing in here
that makes sure that there's no copper burrs.
So just rotate that around just make sure there isn't any burrs
and just mark the pipe because
that's what we want to slide our fittings down to.
So I'm just going to use a shark bite coupling
just making sure it goes down to the
mark. We're just going to do a shut off.
This would be a good idea if you if you had
the space for it to put a shut off.
On so I'm just going to demonstrate
that but yeah just make sure it goes down to
the mark here. When you set this,
now this is a goofy wall all the way around,
if you set this back if you have blocking
two inches behind your rough framing
you'll be in good shape. We're about two
and three sixteenths so that's plenty of room
and you're better off to be too far back than too far out
because if you're too far out there's not
much you can do. If this was a regular two
by four wall all I would do is just take a two by six.
Put it right up against the drywall or the back of that 2x4 wall,
and then you'll be two inches behind the front of that rough framing.
Press it in to make sure it meets that mark.
Hot on the left, and both marks are there.
More
simple
than
that.
Shark bite fitting for this.
Just keep it at the same height that it was.
So maybe not quite the five-minute valve,
but I probably could get down
to that if I didn't have to mess around with,
if I had all my copper prepped and ready to go.
But it really is simple.
These SharkBites are awesome.
Simple, you don't need any extra tools.
So Hammerhead, I do have a discount code for this.
If you're interested in the Hammerhead,
they are really nice because they have,
the escutcheon plates are all metal
and really nice for something like this.
You know and it's very comparable to all the big brands.
Biggest thing is that their valve is heavy
duty and you can easily get this cartridge as well.
So check out the links below for that.
