Viking Age Swords: From Albion

Ancient Edge
3 followers
1 Video View·Apr 12, 2025
Looking at 2 different Albion swords from the age of the Vikings!
What swords did the Vikings use? Hi guys, I am very privileged to be showing two Albion swords
that are not owned by me. These are for my good friend Christian and I need to send them to him,
so we're going to do this very quick review. Some of you may have seen these on previous videos
before. These are two swords from the Viking Age. Now these were not necessarily used by Vikings
specifically and we'll get into that as we take a look at these swords. So we're going to start
with the first one and this is a quite long sword. This is a style of arming sword. This is the
Albion Gjalt. So what is this? This is a sword from the either 9th or 10th century. It is a
single-handed sword, so again we would call this an arming sword. Is this a Viking sword or is this
from Norway, Sweden, Denmark, Scandinavia? Quite possibly. So there are several different ways to
categorize swords. There are different typologies of swords. We're going to talk
about three of them today. There's the Peterson typology, there's the Wheeler typology,
and there's the Oakshot typology. This can be categorized using both Jan Peterson's typology
and Oakshot's typology. So the very end of Jan Peterson's typology that covers Scandinavian
swords during the migration and Viking period stops before the medieval period and Oakshot
basically picks up right as Peterson's typology ends and covers the medieval period. And this
sword overlaps between the two. Now many people when they think of a Viking sword from the Viking
period, whether it's from the Viking area or whether it's from the Carolingian area on the
continent, a sort of the Franks or what have you, they'll think of a sword that has a very small
cross and a very kind of big pommel and a very short grip on it. This sword has a very big
cross like you would expect to see on a medieval sword with big shields, you know, fighting
using knights on horseback. This is a sword from the very end of the Viking age and its name,
Gjalt, means spike hilt and it's a name we see in Viking sagas. So you can see it in Old Icelandic
for example. And we do have surviving hilts of this style that are even sharper than what has
been rendered here by bladesmith Peter Jansson. Peter Jansson and Albion I think were perhaps a
little friendly to consumers so that we don't stab ourselves. So there's a spectrum of these
and this would correspond to a Peterson type of hilt with the long straight points and this type
of pommel as a type 10. Using oak shock we would call this Brazil nut style pommel, a form A pommel
and a style 1 cross. So right at the beginning again of the oak shot typology. And similarly
this would be an oak shot type 10 or type X blade or actually an XA. So it's a 10A blade since it's
a longer version of these very long traditional Viking style swords. So this is the type of blade
that we see. This general configuration of sword was used in a variety of areas. I've seen examples
that look very similar to this found in Bulgaria, found in Romania. There's at least one sword that
has this type of Brazil nut pommel on it found in England. There's an example of a spike hilt
that is held in the Royal Armouries collection in Leeds. So these are known in a variety of places
even though this particular type could well be attributed to quote unquote Vikings from the very
end of the Viking Age, again going into the middle of the 11th century. So you've seen this sword
perhaps on some of my other videos but this is a sword with both a great deal of cutting potential
to it while still remaining maneuverable enough in the hand that you don't have to over commit.
It would make a good sword to be used from horseback whether or not that was a popular type
of fighting style at the time. It has a broad central fuller running down the middle of it.
It can give good point but it has tremendous cutting capacity for delivering blows from
behind a shield wall coming out and giving sweeping cuts. This particular example is
beautifully executed. The grip wrap is done very very nicely. Everything is tightly put together
to the standards that we'd expect from Albion. All of the hilt elements are very well done.
There's some very minor pitting on the way that the pommel is put together. The way that
the blade is slotted into the hilt is very nice and tightly flush. Very mild amount of some of
the adhesive residue shown in the gap where the fullering is. The fuller runs down the lengths
of the blade very straight without much in the way of any wobble at all. This is a sword design
that's got very uniform edges running down the length with only a mild amount of taper.
It does have distal taper although not as much as later designs resulting in a balance point that's
reasonably far forward. It's got a balance point here. I'll put it up on the screen for everyone
to see. As a result there's a decent amount of flex in the blade although not overly so much.
So on the whole this is a very fun sword. Now what about this? Is this a knife or is this a sword?
Well I have avoided talking about sacks on the channel and again people are going to immediately
say it's pronounced sacks or sea axe. Apparently in Old English it's a diphthong and it would be
pronounced something like sacks but I don't specialize in in Old English so feel free to
correct me in the comments regardless. I have avoided studying sacks because traditionally I
considered them knives and I don't study knives I study swords and certainly enough there are very
short examples blades that are maybe only a couple of inches long. As you can see this is decidedly
more than a couple of inches long. So this is based on a specific sword. This is based on a
sword from Little Beelings near Suffolk in England that Peter Johnson studied specifically. So this
is the Brokeback sacks from Albion. As soon as I got it I was amazed at how large and intimidating
it was. This is a blade that has a spine that starts six millimeters here and actually widens
up to about seven millimeters here and only gets down to maybe four you know 3.7 millimeters
way over over here at the tip. And so when I picked it up I'm like is is this a fighting knife
or is this a sword? It comes in at almost 70 centimeters in length so it's 68 something
centimeters in in blade length and it handles very interestingly.
And now let's continue. So we were talking about the specs and the handling characteristics of the
CX and again I want to take a quick moment to shout out to Mike over at Albion. When I first
got this and again this isn't my sword this is Christian's sword it I noticed that the specs
were very slightly off compared to what they were listed on the website and I contacted Peter
Johnson who designed this and between he and Mike we sent this back to Albion and very quickly
they put a little bit of work into it and returned it to me and now this is very a very faithful
representation of exactly what the dimensions and specs are for the Brokeback CX, the Clippoint CX
on Albion's website. So this is very faithfully representing the what Peter Johnson designed based
on the example of the CX in Suffolk and it handles very unusually as a result of the way that it
balances. Again there's not a lot of mass here in the hilt like on a usual sword so it does share
a lot of properties with a knife despite the fact that it's quite long. So I'm going to call
this a short sword even though it obviously has properties like a knife. So sacks have there's
a couple different typologies if we follow the Wheeler typology this would be either a type
three or a type four these once they're clipped back or is this a viking style one? No this is
characteristic of those found in England in the latter part of the sacks lifespan so in the latter
part of the the 10th century. So would these two swords have interacted with each other? Yes but
only when vikings were perhaps raiding England. So this blade sacks again came in all sorts of shapes
and sizes from small utility knives up to this one which is way too big for a utility knife so this
is a fighting weapon and we have limited depictions of how they were used in written
sources or in art. Sometimes they're seen with a sword in one hand and sacks in the other hand
sometimes there's a shield the sacks sometimes they're just shown being used as a knife so this
could be either a backup weapon if your main weapon breaks or it could just be used as a knife
or a dagger as we see in later treaties. There is limited indication that they're used in two
hands and again this is a grip that is that can accommodate two hands. Now when you pick up the
sword how it will handle will vary wildly depending on where you grab it and again because of the
difference in in not having something like a pommel here to counteract the mass of the blade
this is a reasonably wide blade and usually in swords you have thin blades when you have them
very wide. This is a blade that starts at six something millimeters here at the shoulders
and it actually widens to seven millimeters here at the at the peak and it only goes down to maybe
four you know 3.8 millimeters when we're just a couple centimeters away from the tip so this
remains very very thick for how broad a blade it is and you don't have that mass to really change
the balance of it which means if you grab the sacks all the way down here and you try and swing
it you'll get a lot of reach and you'll hit very hard but it is going to take a long time to
recover. If you hold it in the middle it starts to improve a little bit but it still will feel like a
very slow blade however if you choke up to it all the way here now it starts to behave similar to
how some of the Chinese Dao that I'm used to working with do it will pull a little bit in
the hand and to be honest now the length of the handle is starting to act as a counterbalance to
the rest of the blade like you see in some Southeast Asian swords like you see in Dao
or even things like a wakizashi that have not a a pommel but do have the long tsuka which comes
out of the end of the sword even though the proportions are very different so this remains a
a very interesting weapon and one that I was completely unprepared for when I picked it up
I don't think that the stats on the dynamics calculator that I show fully appreciate exactly
how potent and powerful a weapon it is when you pick it up it's almost a thousand grams which
packed into this uh size weapon it really packs quite a wallop even though you are able to
manipulate it if you hold it in the the correct position just real quickly again it's very well
put together it the fullering is done very nicely the the finish is is the typical albion satin
which is just lovely all of the grip is in a great condition the the cross section of the grip
that you might be able to see there is very ergonomic it's not quite perfectly oval with a
widening on the side that um that form fits into the hand we obviously have these three risers here
to prevent hand slipping and again there's nothing from keeping your hand slipping up onto the grip
so we'll do a little bit of thrusting testing but you only have this little riser here to prevent
your hand from going all the way up so if you hit something real hard like mail or a shield or a
helmet there's nothing to keep your hand from just sliding up onto the blade so that is something to
be aware of if you are going to ever do significant thrusting testing with a sword like this now that
said there is a wicked point on this particular example which is a little different than some of
the other types of long sacks like the Scandinavian types usually are a little bit more round so that
they have cutting potential more cutting potential towards the end but less of an acute point and
perhaps we're not as adept at thrusting but since this is a later design perhaps there's more mail
going on maybe they're encountering more mail they're expecting to need to give everyone a sharp
point so let's take both of the blades out and do a little bit of chopping and stabbing and see how
they perform and then we'll wrap it up so i have my shield in front of me and i want to just give
a quick stab with the cx no problem it's going in so clean that it's barely even leaking any water
now can i deliver a snapping cut let's see i did and i cut with the crescent part of the blade
and it caused the decapitation but it caused a little bit of a scoop coming from underneath
not too bad i used a lot of acceleration there and again i'm cutting with the latter part of the
blade the sweet spot is around here or so so i probably am still cutting a little too shallow
but a very clean cut went through very well can i do a Chinese head wrap
not quite for that last one all right no problem stabbing through the harder plastic
this time we cut most of the way through but did not it looks you can see that it the cut
went right into the very thickest part of the plastic fortunately caused no damage whatsoever
to the blade albion makes a very tough sword moving on to the good yalt holding it in a nice
hammer grip so obviously i took the top off very easily with the first strike i didn't swing
particularly hard on the second strike but i just love the the uh the song that it makes every time
it goes through a target yep no problem at all this is a powerful cleaving sword um the edge on
it is nice and sharp and it's just sings when it sails through the the targets okay this is a
slightly different target i have no idea exactly how this is going to work this is a half frozen
pumpkin it has warmed up enough that the pumpkin has started to thaw but the inside is still kind
of frozen don't know what the consistency is going to be like it's not like a traditional pumpkin
we're going to start by thrusting see how the swords do and again the goal is that i'll give
it a big thrust and the pumpkin should not fall off and we'll see how far up the blade the uh
the pumpkin juice goes so i start to scoot the pumpkin back and we went that far which is about
10 centimeters or so it's a pretty good spike i gotta say i think we have a winner now remember
that broke back sax is um quite thick on the spine and that thickness prevents over penetration but
it also just prevents penetration in general so we have 10 centimeters i don't know if you can
see the marks they're left behind but we have about 10 centimeters on the cx and about 25
something centimeters on the good yalt so significantly more penetration coming from
the good yalt than the cx on this stabbing test and again that's because even though on profile
the cx looks like it's very pokey compared to this kind of rounded tip but when we turn it over
in cross section this is way thicker and offering a lot more resistance it's stiffer
but it's offering more resistance and this is very thin and easy to slip in
that's a weird consistency
i don't think i've hit something with that consistency before it's got the consistency of
i don't know it's very thick all the way through it's almost like hitting a bag of sand
so i can try just hitting it one-handed but because it's so dense
i don't think that the sword will go all the way through i can try
wow that was great okay uh apparently it can even make it all the way through that pumpkin
who knew i didn't expect that given how much resistance i had two hands two handing it but
that just goes to show you so it it's a little cumbersome you can strike with a lot of force
but not necessarily i'm not particularly adept at accelerating it this way whereas i have no problem
accelerating it one-handed assuming i'm holding it in the right place
huh interesting so i can pack a wall up like this but because it's so short it's a little bit
tricky to redirect this is a very interesting sword another frozen pumpkin yeah no problem
for the good yalt i'm not sure if the camera's picking it up but you can actually see the ice
crystals on the pumpkin rind yeah this i'm i'm feeling almost no resistance even from this very
thick uh pumpkin um this is just a very very powerful cleaving blade and i'm risking over
swinging like i can do a very light swing and just the weight of the sword itself is enough
to uh to cleave through this particular target so there we have it these are two different very
different types of swords from the viking age uh one from the continent one from england both
have different design philosophies both are probably intended to be used with a shield
in front of them they have different approaches to hand protection we start seeing the beginnings
of the arming sword with this one do we know why guards went from being very short to very wide
that's a topic for a different story but both of them have very powerful ability to cleave
so don't think that cutting power is something that you only see in big curved sabers a double
edge straight sword has lots and lots of cutting power if the geometry allows it hope everyone
enjoyed this and we'll be back here for another sword review next time take care everybody
