"The Gun" (1976) – Part 3: Pistols and Personal Arms

Battlefield Firearms
3 followers
Apr 12, 2025
This episode explores the development of pistols and personal firearms, featuring iconic names such as Colt, Adams, Smith & Wesson, Derringer, Webley-Fosbery, Bergmann, Mauser, Collier, Galand, Mariette, and Merwin Hulbert. Discover how these innovations shaped the evolution of handguns. Note: Some tape damage is present in this footage.
The gun.
By the end of the 19th century, the pistol had arrived as a reasonable weapon, as a suitable
companion for any officer in the field.
It was high-powered and multi-shot, and officers like Winston Churchill thought it was just
the weapon to take to war.
But it hadn't got there in easy stages.
It was regarded as no military weapon at all, reserved purely as a dueling pistol for affairs
of honour or for protection when travelling.
What was wanted was multi-shot capacity, the ability to make sure that one was not unarmed
when one had fired just one shot.
Various methods were tried over the centuries of achieving that, but none was more successful
than by rotation, revolving the barrels.
And in this weapon, made by an eminent maker in the 18th century, we see the system in
a form which was relatively successful, but it was left to the future, to others, to
demonstrate real efficiency in this direction.
Flintlock revolvers were made by various makers on the continent and in England.
This one is by Elisha Collier of Boston, Massachusetts, and is probably a copy of an earlier American
system.
The Collier's main improvements were a mechanical rotation of the cylinder on cocking, and self-priming
of the pan.
For many, the only really safe way of having more than one shot available was to duplicate
or multiply the number of pistols carried.
A pair was carried as commonly, if not more often, than a single one.
With the arrival of the percussion lock, the design problem of the revolver was somewhat
simplified.
Soon the pepper-box revolver was being made by all classes of makers.
This type, called a Mariette, was patented in Belgium in 1837.
Over 50 British makers produced pepper-boxes.
They included such well-known names as Wesley Richards and Joseph Lang, and they achieved
such popularity that they survived for many years alongside the conventional revolver.
Though they suffered from the disadvantage that the barrels of the larger bores were
so heavy that few such were made, they had the distinct advantage over the ordinary revolver
that if there was an accidental ignition of the other barrels, it was not too serious
for the fire.
Quite unintentionally, this classic accident happened to us.
If it had been a revolver, many of the bullets would have smashed into the frame with the
most unpleasant consequences.
Loading a muzzle-loading revolver was therefore a precise and time-consuming business.
There were two available ways of speeding things up.
The powder and bullet could be pre-packaged, or the firer could pre-load a spare cylinder
if he had one.
Changing cylinders took only a moment.
Usually, however, it was a matter of pouring the powder into each chamber in turn, then
a tight-fitting lubricated lead bullet was rammed into each chamber.
Finally, the cylinder was rotated by hand so that a cap could be pressed onto each nipple.
Even the legendary Colt used this system.
Colt and Adams, the two great rivals, the arch-protagonists, first clashed at the Great
Exhibition in 1851.
The Adams revolver model of 1851 was the only British product which could compete with the
unquestionably efficient Colt.
With its solid frame and integral top strap above the cylinder, the Adams had a much stronger
frame than the Colt, and in accuracy it was fully its equal.
In most senses, it was a better military weapon.
The Navy Colt of 1857 was a lighter and more portable arm, well-finished and not without
appeal.
Colt was so sure of his success that he even opened a factory in London and invited the
public.
It was an enormous success, not only in the engineering sense, but in a social sense.
Everybody went there, and until 1857 it was one of the sights of London.
He presented revolvers like this to all the prominent people he could find.
This one was presented to Lord Lucan, of Crimean fame.
In fact, this is a Colt Navy revolver, and it was of the same pattern as was issued to
the tune of 9,500 to the Royal Navy in 1854.
A year later, further success, 14,000 were issued to the army in the Crimea.
It looked as if Colt had everything wrapped up, but it wasn't to be.
Adams came back, and this is his reply, the Beaumont Adams.
It was a revolver used in the Crimean War with great success.
And the thing about this revolver is that it was really forward-looking.
With the Beaumont Adams, the revolver had arrived.
This is the famous Smith & Wesson .22 pistol of 1857, one of the most important weapons
in the development of the gun in the 19th century, because this is the first popular
breech-loading pistol.
It's, for two reasons, so important.
Firstly, in 1855, Smith & Wesson had acquired the Rolling White patent for the bore-through
cylinder, the obvious way to achieve breech-loading.
Indeed so obvious that, as Smith & Wesson held onto the patent until 1869, no other
American maker could choose the obvious course to effective breech-loading.
The pistol is also, however, very important for another reason.
It uses the .22 Rimfire cartridge, and one can see where the hammer has struck the edge
of the cartridge.
The .22 Rimfire cartridge was itself first produced in 1854, and with it really ushers
in a new epoch.
And it's not just in .22.
It appears also in .32, as a modest but quite effective cartridge, and in the larger calibres.
Here we have it in .41 calibre, in a Derringer, a gun which is very famous in its own right.
A parallel development was the pinfire.
In a sense, it was the logical way of relating the striker to the cap.
It was in fact invented by a Frenchman, Lefourchaud, in 1828, and is therefore one of the earliest
of self-contained metallic cartridges.
Remarkably, these were still being made up to the last war.
The pinfire cartridge, which had been much favoured in the Continent, has an obvious
built-in disadvantage, the pin.
It can be accidentally struck, and the cartridge accidentally detonated.
Not very suitable for military purposes.
The Rimfire cartridge equally has problems associated with it.
The amount of the initiating composition is considerable.
What we were waiting for was a centrefire cartridge, and Potet, in 1858, produced it.
It took some time to produce a decent cartridge for a service revolver.
When it came, we had waited for quite some time.
It wasn't until 1857, in fact, with the Mark I Adams, that it came along, and in 1868,
the Army received them.
Well, it was a success, and other models followed.
The Mark II Adams in 1871, and shortly after that, we came, in 1878, to the Mark III.
These are all in .450 calibre, and were very successful.
In America, too, centrefire was catching on for military purposes.
In 1873, the Peacemaker arrived on the scene.
It was unfortunately not a very sturdy revolver, not very well designed by our standards, but
the Americans seemed to think that it was very successful.
The problem with the cartridge-loading revolver was one of getting rid of the case having
fired it, and in the 1880s Enfield .476 revolver, and this is one of them, we arranged things
so although it's superficially a break-open revolver, in fact, at that point in time,
the fired case drops out, and one is left, fortunately, with the unfired cartridges still
in position, so reloading is fairly simple.
Other makers had other ideas, and here we have a small Continental Gallon, you fire,
and at this stage you have to re-cock, as usual, and operate an under-lever, which successively
leaves the cases behind, and as you can see, makes a pretty messy job of it, but again,
it wasn't a bad idea.
You can see things get rather complicated, and with the Merwin-Hulbert, perhaps they
reach the height of their complication.
Again, we fire, and then we have to half-cock again to clear this, operate an under-catch,
and that is the way in which you can get rid of your one-fired case and reload.
There are worse designs than that, but it's an expensive one to produce.
What in fact happened was that in America, with Smith & Wesson & Colt, a design was produced
in which we had a swinging-out cylinder and an operation of a lever by which the cartridge
cases were knocked out.
Not perfect, but not too bad.
The British, however, in the shape of Webley, had an even better idea.
They really produced a fairly massive proportion in the central stirrup, and as you can see,
it gets rid of the empty cases, but it leaves the fired ones in.
And it's this design which really has dominated in this country revolver extraction mechanisms
right up to the present time.
The problems of high-speed ejection were solved with the revolver.
The one remaining problem was that of quick loading.
The procedure of hand-loading is slow, and various ideas were tried to load in a single
pressing motion.
The most successful of these was the Predo.
Although it was patented in 1893, it took some time to catch on, but was eventually
recognised by the authorities and saw considerable service in the Great War.
The revolver in one sense reached its mechanical zenith with the Webley-Fosbury, the only really
successful true automatic revolver.
It was designed by Colonel G. V. Fosbury, V.C., in the mid-1890s, but it was not marketed
on any scale until 1901.
It successfully harnessed the recoil of the barrel and action to turn the cylinder.
At the same time, the moving parts cocked the hammer ready for the next shot.
The challenge to the revolver didn't come from the multi-barrel pistol, nor even from
the mechanically self-loading type of pistol, the squeezer or palm pistol.
These are examples of this interesting class.
This on the left looks backward.
It looks back to the revolver design, with a rotating cylinder.
In this one, however, which is called the Mitrailleurs, the design is much more clearly
adapted to the future.
In this, the motive force is provided by the hand, but it's quite clear that the gas could
be tapped to make this into an automatic operation.
It took some time, however, to adapt it to the pistol.
It took, in fact, until the early years of the 1890s, and then designs such as this one
emerged on the market.
This one by Bergman is satisfactory in its way, but never achieved great popularity.
But the pistol which did achieve real popularity, and ultimately immense worldwide sales, was
the Mauser Automatic Pistol of 1896, a gun good enough to be carried by the young Winston
Churchill, when all about him carried revolvers.
The pistol was at last acceptable.
