This restricted WWII era Signal Corps training film conveys information about common weapons used by the Japanese military. It covers the basic function of each weapon including various features, as well as information about how to load, aim, fire, and disassemble it in a field situation. The film features close up footage of all the weapons and the different constituting parts. The M38, M99, Solothurn SMG, Type 89 Grenade Discharger, Nambu Model 1922 SMG, and the Model 1932 Heavy Machine gun are featured.
0:10 Title “War Department Film Bulletin: Produced by Signal corps Photographic Center Issue No. 80”, 0:21 U.S. Army soldier testing a bolt-action rifle, 0:40 Title “Rifles Model 38 and Model 39”, 0:41 Shot of both aforementioned rifles, 0:58 Close up shots and demonstrations of the functions of the M38 such as the bayonet, cleaning rod, sights, loading chamber, trigger, and magazine, 2:04 Soldier demonstrates how to disassemble the bolt of the weapon and shows its different parts, 2:59 Soldier holding a M99 rifle with bayonet and demonstrates its monopod function, 3:21 Soldier begins showing the different functions of the M99 including the bayonet, sight, loading chamber, trigger, and magazine, 4:10 Soldier begins disassembling bolt mechanism of M99, 4:42 close up of ammunition for both rifles, 4:53 demonstration of loading and firing of the M99 and M39, 5:19 Title “Solothurn Sub-Machine Gun”, 5:22 Soldier seen holding Solothurn SMG, 5:33 Soldier begins demonstrating features of Solothurn SMG including change to single shot fire, how to cock weapon, triggers, safety, sights, and bolt locking, 6:06 Soldier demonstrates how to disassemble the firing mechanism with close up shots, 7:12 Soldier begins detaching the barrel, 7:52 Soldier shown demonstrating the Grenade Discharger Type 89 by loading, aiming, and then firing it, 8:30 Same weapon is loaded with the Type 97 Hand grenade and fired, 8:49 Soldier shown loading a Light Machine Gun Nambu Model 1922 and demonstrates loading, aiming, and firing, 9:34 Soldier demonstrates how to disassemble the Nambu LMG with close up shots, 11:13 Soldiers shown with a Model 1932 Heavy Machine Gun and demonstrating how to set it up, load, aim, and fire it, 12:40 Soldier demonstrates how to disassemble the Model 1932 with close up shots, 15:05 Soldier shown firing the Model 1932, 15:08 Summary footage of all the weapons shown in the film, 15:34 Title “The End: Film Bulletin”
Motion picture films don't last forever; many have already been lost or destroyed. We collect, scan and preserve 35mm, 16mm and 8mm movies -- including home movies, industrial films, and other non-fiction. If you have films you'd like to have scanned or donate to Periscope Film, we'd love to hear from you. Contact us via the link below.
This film is part of the Periscope Film LLC archive, one of the largest historic military, transportation, and aviation stock footage collections in the USA. Entirely film backed, this material is available for licensing in 24p HD, 2k and 4k. For more information visit http://www.PeriscopeFilm.com
Enemy weapons received careful and thorough study by army experts.
The Japanese small arms shown in this picture are widely used by the enemy. Generally speaking,
while their weapons are extremely serviceable and well-made, they lag far behind our own in design,
durability, and effectiveness. Here are two captured Japanese rifles. The longer top one
is the Arisaka model 38, a 25-caliber weapon. Below it is the new model 99, 303 caliber,
which is rapidly replacing the M38 in most theaters. The M38 employs the standard bayonet
model 19-5, which is easily removed by simply sliding forward. Press in on the cleaning rod
release catch to free the full-length cleaning rod from the stock. The sights are an ordinary
front sight and a knockdown leaf-type rear sight graduated from 440 to 2640 yards. There
is no allowance for drift or windage on these sights. The M38 is a five-shot bolt-action weapon,
very similar in operation to our own Springfield. The magazine floor plate may be removed by
pressing on a release button located inside on the forward portion of the trigger guard.
To disassemble the bolt, draw it fully to the rear and pull out on the bolt stop on the left
side of the receiver. Take off the dust cover, turn the safety one half turn to the right,
and remove. Next, pull out the firing pin, and then its spring. They go back together in the
reverse order. The dust cover on the bolt mechanism is removed by the Japs in combat
to ensure silent operation of the bolt. Here is the latest Jap rifle, model 99. The sling
is generally a rubberized canvas and serves no other purpose except to carry the rifle.
The monopod hinged to the lower band or sling swivel acts as a rest for the weapon when it's
fired from a foxhole. The bayonet is similar to the one on the M38 and comes off in the same way.
Like the M38-2, the cleaning rod slides free when you press the release catch.
The leaf type rear sight on this gun is equipped with projecting arms which are intended for use
in tracking aerial or moving ground targets. The magazine follower must be depressed before the
bolt can be closed. The trigger guard on this weapon is larger to permit firing with a gloved
finger. The magazine floor plate is hinged to prevent its loss and also to permit rapid
unloading when necessary. The bolt mechanism, modified for firing the larger caliber ammunition,
is the same as that of the M38 and is disassembled in the same way. First the dust cover,
then the safety, firing pin, and the spring. Here are the M38 and the M99. Notice that the stock of
the M99, the bottom one, has been shortened to fit the physique of the Japanese soldier.
Both guns fire ammunition in five-round clips. The longer projectile on the right
is used in the M38. The short bullet is fired by the M99. The guns are loaded and fired like
our own Springfield. The 99 has a recoil very much like the Springfield-2.
The M38 has very little recoil and no muzzle flash. The Japs find it very useful as a sniper's weapon.
This is the Jap Solothurn submachine gun, caliber nine millimeters. It's blowback-operated,
air-cooled, and is fed by a 30-round box-type magazine. For single shot fire, push the change
lever to the rear. To cock the weapon, pull the cocking handle to the rear as far as it'll go.
A safety catch is provided on top of the receiver in front of the rear sight.
The bolt can be locked in either the forward or the rear positions. To open the cover,
press in on the cover lock latch. Then remove the bolt group by pulling to the rear. Lift out the
front of the bolt first. Remove the firing pin housing backplate by turning a quarter turn to
the right. Pull out the cocking handle. The firing pin will then slide out of its housing.
The point of the firing pin inserted in this hole will unlock the extractor,
which can then be easily removed. This is the bolt group disassembly. The barrel is detached
by unscrewing the barrel locking nut. The driving spring, which is accessible through the butt of
the stock, is removed by pressing inward and turning right or left a half turn.
This is the Solothurn submachine gun in a field strip disassembly.
The grenade discharger, type 89, is widely issued in the Japanese Army.
The enemy has developed a variety of uses for this weapon.
This is the type 89 shell. It's inserted into the muzzle end of the barrel, fuse end up.
To decrease the range, the range control head is turned clockwise. To increase,
turn counterclockwise. The discharger is fired by holding the weapon in the left hand
and pulling downward on the trigger with the right. The same method of loading the piece
is used in firing the 97 HE hand grenade. The same procedure for increasing or decreasing
the range is followed, and the weapon is fired in the same manner.
This is the Japanese Nambu light machine gun, caliber 6.5 millimeter, model 1922.
It's gas-operated, air-cooled, and is fed from a 30-round box-type hopper.
After filling the hopper, the follower is lowered, and the gas regulator is adjusted
for smooth operation. Preparatory to firing, the rear sight, which is of the sliding ramp type,
is adjusted. There is no provision for windage made on this sight adjustment.
To steady the gun for firing, notice that the stock is grasped firmly in the left hand.
This gun is equipped with a safety. Safe is in the forward position,
fire in the rear. The weapon is cocked by pulling back on the cocking handle as far as it'll go.
To field strip, the hopper may be removed by exerting a backward pressure on the feed housing
lock with the thumb of the right hand. To remove the back plate, turn the lock pin a quarter turn
to the left and drift out left to right. Then the back plate and the driving spring can be removed
from the receiver. The driving spring and rod are separated. The entire operating mechanism
comprising the piston, piston rod, piston rod extension, and the bolt are removed from the
receiver. The bolt is detached from the piston rod extension. Move the cocking handle to the
rear position. To separate the trigger group from the receiver, the retaining pin must be drifted
out from right to left. The trigger group will then slide off to the rear of the receiver.
The barrel jacket is locked to the receiver by a lock pin.
After it's removed, unscrew the receiver. The barrel slides easily out of the barrel jacket.
The gas regulator is unscrewed by turning counterclockwise.
The gas piston tube is removed from the barrel jacket by pressure rearward on the tube.
The functioning and disassembly of the Nambu light machine gun
is very similar to that of the heavy machine gun which follows.
This is the Japanese heavy ground machine gun, model 92. The caliber is 7.7 millimeters.
It is gas operated, air cooled, and is fed by 30 round plate chargers. To get it into action,
remove the tripod carrying arms. Then insert the 30 round plate charger into the feedway.
The cradle elevating mechanism is unlocked by turning the lock handle one quarter turn.
This frees the wheel which lowers or raises the cradle. To traverse the gun, squeeze tightly on
the traversing lock handle, then turn it counterclockwise a half turn. To lock the
traversing mechanism, reverse the procedure. There are two ways to elevate and depress this weapon.
It can be done manually by unlocking the elevating hand wheel and turning the lock
handle a half turn counterclockwise. Or mechanically by locking the mechanism
and turning the elevating hand wheel. On this gun, the trigger acts as the safety.
To place the gun in the safe position, turn the trigger a quarter turn counterclockwise.
Adjust the gas regulator for smooth firing. To field strip the weapon, release the plate charger
by pulling outward on the holding pole. Then pull back on the cocking handle as far as it'll go.
In freeing the bolt, pull outward on the holding pole to release it from the operating slide.
By pressing on the trigger with both thumbs, the bolt is released. To elevate the grips,
press in on the grip locks on either side. Then remove the gun from its mount by pulling out on
the elevating arm lock pin and releasing the locking catches from the gun cradle lock.
The telescopic sight may be removed by turning the lock screw counterclockwise a half turn.
The lock pin has been removed and the back plate can now be separated from the receiver.
Next, the driving spring comes out and the buffer is lifted off the driving spring rod.
The operating mechanism consisting of the piston, piston rod extension, and bolt
comes out of the receiver as a unit. Separate the bolt from the piston rod extension.
Then remove the firing pin. Now the bolt lock can be separated from the bolt.
Before the cocking handle can be removed from the receiver, it must be in the rear position.
The gas regulator is unscrewed from the gas piston tube.
And finally, remove the oil reservoir, which is held in place by a retaining screw.
This reservoir is used to oil the cartridges before they're fired,
as this gun does not have an initial slow extraction. The Japs used this weapon in
several different ways, as a light anti-aircraft gun and even mounted on some of their tanks.
Here they are again, Japanese Army weapons. Rifles, the Model 38 and the newer Model 99.
The Solothurn submachine gun, Type 89 grenade discharger, the Nambu light machine gun,
Model 1922, and the heavy ground machine gun, Model 92.
Knowing something about these weapons may prove mighty useful someday.