War Of The Worlds: The Destruction Of The Thunderchild. #3dprinting #diorama #resinart

Scale Model Geek
93 followers
I finally do a project that I've been wanting to do for over 30 years. From one of my favorite novels by H.G. Wells, I build the destruction of HMS Thunderchild by a Martian War Machine from the novel, War Of The Worlds.
-----------------------------------------------------------------------
INSTAGRAM: @scalemodel_geek
ETSY SHOP: https://www.etsy.com/au/shop/ScaleModelGeek
3D MODEL FILES: https://www.cgtrader.com/designers/scalemodelgeek
-----------------------------------------------------------------------
#modelkit #modellers #scalemodel #scalemodelkit #scalemodeling #scalemodels #plasticmodels #diorama #3dprinting #3dprint #resinart #scifi #apocalypse #worldbuilding
Welcome to the scale model geek and for my very first diorama for 2023,
I'm going to build something that I've been wanting to do for about 30 years now
and it's War of the Worlds. Now as much as I love the 1953 and the
2005 versions, I've always wanted to see the original
story that was set in the 1890s and Jeff Wayne did that with his
musical and then luckily we've got the 2019 series which was a British series
and that was set in the correct time period.
Now I found this awesome 3D file on Thingiverse and I'll leave the
link in the description. The only thing I didn't like was the actual legs, they
looked a bit scrawny and didn't look like they were going to work
properly. So I did do some modifications to the file so
it will suit my purposes and you can see I also did some changes to
the basket catcher there. Now I started off with the base and
as I said I chopped off the legs and I replaced them with ball joints.
This was a very simple process to do and then I went into a piece of software
called Blender and created these leg joints from scratch and I'm just
using some simple basic shapes there, circles, cylinders and that type of
thing and then threw them into Chitterbox to
actually print out. Now I printed these originally in clear
simply because I was thinking of putting some LED lights into the actual body
because I wanted that big eye thing glowing
and that's what they look like all printed up. Now I'm using brass rod
for the actual legs mainly for a bit of sturdiness to give them a bit of
strength. Those joints, the leg joints that I
created have got a hole straight down the middle
so those brass rods just go straight through it.
But they're actually tubing, they're hollow. In the original HG Wells novel
the most powerful weapon they had against the Martian war machines
was a ship called the Thunder Child so I needed to find an actual ship that was
from that era and I came across this ship
and it's a French ship called the Bouvet and it's from the right time period
and a bit of a hunt I finally found it on Thingiverse as well.
Now I originally thought I'd print the hull in two pieces
simply so I can fit as much as I could onto the printing plate.
Turned out to be a bit of a mistake because I end up with these huge
joints. I really didn't want to spend all my
time actually filling then sanding those joints.
Now the conning tails were actually separately printed as well and they kind
of didn't fit as well as I hoped they would.
So I kind of thought okay what I might do is jump into Blender and do some
modifications to original 3D file and also give it a slightly different
silhouette so it doesn't look like the Bouvet because it has to look like the
British ship the Thunder Child. So I started off with just
adding some supports there because that running deck or whatever that thing is
was a bit thin so I fixed that up and actually modified that running deck as
well and because this is all waterline 3D
file I need to do a bottom half to it as well
and also I created some lifeboats. Now I found these lifeboats on Thingiverse
again and just added it to the ship. Now those lifeboats aren't perfectly to
scale but close enough and also a third smokestack and some
conning tails to the actual ship and then threw it into Chitterbox to
print and this was a huge print in the fact that it took about 22
hours to actually print but it was definitely well worth the
printing time because it came out wonderfully perfect
and I had the whole ship in one go. So you can see all the little extra
details I added to it and I also wanted some new gun turrets.
Didn't want to keep the original ones that came with the 3D print because they
looked a bit weird. So I created these brand new ones in
Blender and again look at that they're very simple to create because I'm just
using basic shapes. Cylinders and squares
and cubes and there's my turret simple as that
and what I do I print in multiples simply because if something goes wrong
something breaks or I lose something I've got plenty and I can always use
them as greeblies in other projects and that's comparing the two.
The original turret actually had a single barrel
and mine doubles. Now onto the rigging I'm just drilling a small hole into
the oh it's a mast I guess I don't know what you call them
and just putting some thread through it some cotton thread
and at each end I'm just using a bit of super glue to
hold it down and once that's dry I then stretch it fairly taut and
drop of super glue at the other end as well. I'm just making up as I go along
it is a fictional ship so who knows what it's supposed to look like.
This is the second ship I've ever built in my life the first one I built
probably about 25 years ago and that was a US frigate. This is the
first time I've ever actually printed a ship
and so far so good. The more I use Blender the more it gives me the
opportunity to actually grab hold of 3D files and actually modify them to suit
my needs. So I'm ending up with this really
unique ship it's a one-of-a-kind and hopefully people aren't going to
recognize it as the Bovet. Now for the actual rigging I'm using
some of this primer and this will hopefully stop some of
the hairy bits on the actual thread. Now off camera I designed these guns
and some more detail to add to the ship. Now those are the custom turrets I
designed. I've got to admit it's looking pretty
fierce. Now on the other side this side I've
actually left out some of the weaponry there because right in the middle there
I'm actually going to add an explosion with some LED lights
and some cotton buds so I need to drill a hole in there.
My Dremel tool comes in very handy in this little instance
and because it's a hollow ship it's so easy to actually get the wiring through
it. And with the first undercoat all done
it's time to actually put on the base color which is this dark sea gray from
Vallejo. It's looking good maybe a little bit
dark but I like it. And for the poop decks or the running
decks or the deckways I have no idea what you call it
that beige color from Vallejo. And I'm using this off-white for the
lifeboats and also for the smokestacks or ship funnels either or either.
And just like everything else on this build I'm just making it up as I go
along. Now for the very top of those
smokestacks I'm just going to paint them red.
Only because I think it looks pretty cool no other reason.
This is probably the most inaccurate British ship in the history of mankind
but it looks cool. With all the base colors blocked in
it's time to add the weathering. I'm starting off with this Vallejo wash
and it's a black. Now a quick spritz of water
and all this does is make the wash actually flow a lot easier across the
body. By the way if you haven't already smash
that like button and subscribe to the channel.
Your support will be greatly appreciated. And with the wash all done and dried it
was time to actually add a bit of dry brushing
just to pop out some of those highlights. I'm using a combination of this Panzer
Grey and the light sand and hitting the high
areas of that ship. And for the gun turrets I'm just hitting
it with that gun metal from Ammo and also some of this light metal for
the detail on the actual deck. Off camera I jumped into Photoshop and
created these decals and then using my laser printer I
printed it onto white decal paper and cut them out.
Stuck them on. Now that decal actually says HMS
Thunderchild and being the 1890s the person
reigning would have been Queen Victoria.
So it would have been Her Majesty's Ship. And if I'm wrong
please let me know in the comments because I know nothing about British
ships. Zero. But they look good. Well this one
looks good. Now it needs one more thing and that's
some rust on the hull. Now I'm using these weathering pencils
from AK which I've never ever used before.
So this will be a learning process for me and my first mistake was I tried to
put the pencil through a sharpener to get a finer point to it
and because the actual innards of it now is it a grease pencil or something like
that was so soft it just kept on snapping.
So I had to resort to a hobby knife to sharpen it.
Or get a new sharpener with a really sharp blade.
Once I got the really fine point to it the way to use it after a bit of
research because like I said I'd never ever used these before
was to actually dip it in a bit of water and just draw a bit of rust on where you
need it. And what I also did was then I grabbed
the brush and dipped it in the water and kind of
just blend it. And I was really really happy the way it
actually turned out considering it was my very first time.
This stuff is actually really really good so I'm planning to use it a bit
more often and hopefully with a bit more practice I'll
kind of get the hang of it. Have a look at that it's not too shabby if I do say
so myself. Nice finish to it though the deck could
have been a bit more even. Now on to the Martian War Machine. Now
like I said originally I was going to put an LED light into the middle of it
but after a bit of testing I found there was something inside the print that was
stopping it from shining through very brightly.
A support or something like that I don't know but ended up having to
dump that idea. And these are the 3D printed
joints the leg joints and they have a hole straight down the center of it so I
can run those brass tubes through them. And that's the basket to go on the back.
The people catcher. Now I made a hole to fit exactly the size of that brass rod
or rather tube and then it was just a matter of
measuring it up to make sure they're all nice and even and evenly spaced.
And to actually cut this tube I've got this
brass tube cutter and it's just a matter of adjusting a little wheel that's
inside the middle of it and making a bit tighter twirling it and
it gives a really nice clean cut to it. As you can see it slides
straight in and there's my three legs. Once again
making sure they're all measured evenly and the leg joints were just actually
super glued into place. What I'm doing here is drilling some
holes for those tentacle things. You know the ones to pick up the people
stick them into the people basket and also one that actually holds the
laser as well. But it'll look like something else.
And into the greeblies box of mine and I'm using these little bits and pieces
to put together a laser. I'm trying to find kind of a retro feel
to the actual laser. And tentacle just wraps around there and
for the top of the actual legs I'm just using some of these
nuts and bolts that I actually printed up ages ago
and a bit of super glue to lock them into place.
Now the fine wire for the actual tentacles
and to dress up the ends of the bare wire I dipped it into some resin created a
teardrop at the end and then solidified it with some UV
light and to hold everything into place some super glue because
it's super. As you can see I twisted the wire around the laser
and for the second tentacle I kind of twisted it to make it look like it was
alive and had some movement into it.
And there it is completely assembled and ready for some paint
very shortly. It's a shame I couldn't get the light going in it but
kind of still happy with the final finish of it.
Now for the base color I'm just using some black.
I'm also going to use some of this Green Stuff Color Shift Metal
which is a chameleon paint because it changes color as you look at it from
different angles. I'm trying to just get that really
alien worldly or rather off-worldly look to it.
Now I've used this stuff a number of times and I really love the look at it.
I tend to use it on anything that looks a bit you know alien-ish.
If you haven't smashed that like button or subscribed to the channel
here's a friendly reminder. And the final part to be glued onto the
Martian wall machine is the people basket in the back.
And now finally with this light metal to give it a bit of a dry brush and I'm
just going to hit some of the highlights there.
And to add a bit of visual interest some of this gold leaf from Tamiya for the
actual laser. Now I'm using some of this Green Stuff
World Chrome Metal for the base of the actual eye.
And once this chrome is actually dry I'm then going to give it a couple coats of
actually some clear red from Tamiya. Once I've done the edges
with a fine brush I then go in with a flat brush and give
it a nice even coat. Now that I have the two vehicles all
completed it's time to move on to the diorama base.
First thing I need to do is give it a quick layout just so I know where
everything goes. And then once I'm happy with its
placement I then plot out where I need to actually cut out a hole
for the ship to be recessed into. To cut out the recessed area I'm using
one of these hot knives. But as you can see it creates a lot of
fumes so make sure you're wearing a mask for this.
And if possible an open window as well. Now at the bottom of the actual diorama
base also need to cut out an area for the battery compartment.
Problem is I got a bit ahead of myself and I actually cut it out
in the wrong place. Now that little slot is actually directly underneath the
ship so I couldn't get enough depth out of it. So I had to move it
over slightly like that. Not to worry won't be seen.
Now to create the waves I use some crumpled
aluminium foil with a bit of PVA glue to stick it to the base.
And some wire pins to hold it in place while it dries.
And once that whole base is actually covered with the aluminium foil
I then give it a coat of PVA glue. Now the reason I do that is simply because I
want to put another sheet of aluminium foil over the top.
Now the reason I'm doing this is actually to unify all the separate
pieces together and also soften up some of those well
wavy things. And this actually gives me a much more realistic waveform.
You can see it's actually starting to look really really good. A bit shiny but
it is looking good. Once that is completed we need to give
the whole base another coat of PVA glue. And the reason we're doing it this time
around is so the paint can actually stick to the tin foil. And you can see
with the glue all dry it's left this satin finish to it. This will make a
great base for the next step. Let's stick the ship into place with
some hot stick glue. And then some more PVA glue and some more
tin foil as well to fill up the gap between the ship
and the waves. Now onto the painting of the ocean.
I'm using a combination of that black and the green.
And I need a really dark green for the base colour.
And I've just added some white to the combination that I created.
And just hitting the top ends of those waves.
Once that is done we add some more white to it and hitting the very peak of those
waves. And that's what it looks like when the
base colours are all dry. So to add a bit more realism to it we
actually need to hit the top of that with some impasto gel.
Now this is a really thick clear medium. And once it dries it actually adds
slightly more texture to it. And it adds that gloss that we need for
the ocean. Good news it actually doesn't remain
like this it goes clear. And it will look a lot more realistic.
Now to add some of the foaminess to the waves that are hitting the ship.
I'm just using some cotton wool here. And some white glue to hold it into place.
And once the hull of the ship is all done I'll add some impasto gel onto the
top of that. Now for a bit of fun let's create the
explosion. A bit of acrylic tube there and I'm just
using some of those LED filaments. You can get those off
Aliexpress, very cheap. Once I prepare the wiring I then solder
them to the filament. Now on the filament the end that has a
small hole in it is actually the positive side.
And a couple AA batteries because these are only three volt.
So not dangerous power at all. For the actual explosion I'm using some
of this cotton ball that I've unwrapped and I'm just going
to glue it to the acrylic tube. I can then do a bit of puffing, a bit of
shaping of it and we can get the right shape that we need.
Once I've got roughly to where I need it the first coat I use is some of this
orange fire from Vallejo. Then hitting it with some red.
Then for some of the highlights I'm just going to hit it with some yellow.
Or sun yellow. Once that's done it's just a matter of sliding onto the filament.
And that's our explosion. Now to hold it into place I did use some PVA glue
and I stuck it to the hull and as well as the ocean.
And there it is. I think it's actually come up pretty well for my first ever
explosion. Now of course because the ship's being blown up it needs some
debris coming out of the blast. So I'm just gluing some of the
small turrets to it and some pieces of plastic painted in
the same color as the ship. To glue down the Martian war machine I
just end up using some of that impasto gel.
And that was about all I needed to do other than the fact I actually ended up
going in off camera and adding some more black to the explosion.
And with that all completed I think it's time to show off with the final
hero images. Or this time it's footage.
