Want to reach your goals faster?? Apply to my 1:1 coaching and let's work together to take your fitness journey to the next level! Tell me more about your goals: https://naomikong.com/
Hey, there!
In this video, we'll be going over how to use some basic lower body machines.
I remember how intimidated and overwhelmed I was with gym machines when I first began my fitness journey, so I hope that this video will help put some of your worries away!
Always remember that we ALL start as beginners and have all made silly mistakes. Don't get so caught up in not trying to make mistakes that you limit yourself at the gym and in your fitness journey. The only way to grow and get better is to challenge yourself and step outside your comfort zone. Never be embarrassed to ask a fellow gym member for help!
#naomikongfitness#naomikong#howtousegymequipment *This video and description contains affiliate links. This helps support the channel and allows me to continue creating more content for you. Thank you for your support!
Hey guys, if you no longer want to feel intimidated, scared, or overwhelmed by the equipment you see in your gym,
this video is made for you.
By the end of this video, you'll feel much more comfortable and confident walking into the gym.
Let's get started.
If you're ready to learn how to use gym equipment, follow me.
First up, we'll be going over the leg extension machine.
This machine will target your quads, which are the muscles around your thigh area.
Every machine will have a picture showing you what muscle it works,
and give you directions on how to use it.
Make sure to refer to the machine's diagram if you ever have questions on how to use it,
or what muscles it works.
There will be two points of adjustment for the leg extension machine.
One to move the leg rest up and down, and one to move the back rest forwards and backwards.
Essentially, the shorter you are, the farther up you'll want the back rest.
There's no right or wrong adjustment.
Simply adjust the machine so that it is most comfortable for you and your body.
It might take a few tries, so never be embarrassed if you have to readjust your machine.
To adjust the height of the leg rest,
pull the orange knob to the right of the machine out towards yourself.
Keeping it pulled out, move it to your desired adjustment setting,
and simply release the knob to lock it back into place.
To adjust the placement of the back rest, pull the orange knob behind the seat up.
Keeping it pulled up, push the back rest forwards and backwards.
When it is at your desired position, release the orange knob to lock it back into place.
To adjust the weight, take the weight selector pin,
and simply insert it into your desired weight.
As you can see, the weights go up at 15 lbs, but if you need to increase by only 5 or 10 lbs,
slide these circular weights on the top to the right to use up.
Each one weighs 5 lbs.
If you're new to a machine, I always recommend starting with the lightest weight,
and once you can do 12-15 reps comfortably with good form, then increase the weight.
There's no right or wrong amount of weight to use.
When you're ready to begin, have a seat on the chair.
Place your legs behind the leg rest and hands on the handles on either side of the seat.
To lift your feet up, contract your quads and exhale.
As you return back to starting position, inhale.
Your butt should stay on the seat at all times.
Next, we'll go over the standing calf raise machine, which works your calf muscles.
Like the first machine, you'll find a diagram on the machine
giving you instructions on how to use the machine and what muscles it works.
There will only be one point of adjustment on this machine,
which will be to adjust the height of the shoulder rest.
Essentially, the taller you are, the higher you want the shoulder rest,
and the shorter you are, the lower you want it.
To adjust the height of the shoulder rest, locate the black knob on the right side of the machine.
Pull it out, and keeping it pulled out, use your other arm to move the shoulder rest up and down.
When it's at your desired height,
release the lever back into one of the holes to lock it into place.
To adjust the weight, simply place the weight selector pin into your desired weight.
Note that pounds is written on the left and kilograms on the right.
When you're ready to begin, stand on the elevated foot rest
with only the inner and outer balls of your feet on the rest,
and the pads of the shoulder rest on top of your shoulders.
Start with the heels of your feet lowered.
Contract your calf muscles to raise your heels and position yourself on your toes.
Exhale as you go up, and inhale as you lower yourself back down.
Following, we'll go over the hip adduction machine, which works your hip adductors.
Again, you can always refer to the machine's picture for instructions
on how to use the machine and what muscles it works.
There will only be one point of adjustment, which will change the width of the inner knee pads.
How far apart or close together you should have them just depends on your body.
There's no right or wrong.
To adjust the knee pads, lift the lever on the right side of the machine up
and move it forwards or backwards.
The farther forwards you move it, the closer together the pads will move,
and the farther backwards the lever goes, the farther away the pads will move away from each other.
To adjust the weight, insert the weight selector pin into your desired weight.
The weights go up by 15 pounds, but if you need 5 or 10 pounds added,
you can use these additional weights at the top of the weight stack by pulling the knob out
and placing it on top of the weight stack.
If you don't need the 5 pound increment,
pull the increment back up and insert the knob back into the hole to secure it into place.
When you're ready to begin, have a seat.
The knee pads should be adjusted wide enough to give you a good range of motion,
but not too wide as to be uncomfortable.
Your feet will go on the steps connecting to the knee pads,
and your legs placed on the outside of the pads.
Hold the handles for added stability.
Exhale as you push your knees together, and inhale as you extend them back out.
Next, we'll be going over the leg curl machine, which works your hamstring muscles.
The machine's picture tells you how to use it and what muscles it works.
There will be two points of adjustment,
one to move the backrest forwards or backwards,
and the other to adjust the height at the shin rest.
To adjust the backrest, pull the lever on the right side of the seat with the yellow knob up.
Keeping it pulled up, use your other hand to push the back of the seat forwards or backwards.
When it's at your desired position, release the handle to lock the seat back into place.
To adjust the height of the shin rest, pull this orange knob out,
and keeping it pulled out, use your other hand to guide the cushion up and down.
When it's at your desired height,
release the orange lever into one of the holes to lock it back into place.
This cushion will go right under your knees and secure your legs in place
while you perform the exercise.
To adjust the weight, simply use the weight selector pin to pick your desired weight.
When you are ready to begin, have a seat holding the handles by the side of the seat
with the cushion readjusted on top of your shins right under your knees
and the lower cushion right under your calves.
This particular machine will lean your back slightly as you perform the curl, but many don't.
Make sure to keep your back and butt on the seat at all times.
Allow your hamstrings to feel the motion.
As you curl, exhale, and as you extend your legs back out, inhale.
If you find you have extra room under the cushion on the front of your legs,
adjust it so that your legs are more secure.
This next machine is a lying leg curl and will also work your hamstrings.
It is a similar movement to the one we just did, except in a different position.
There will be two points of adjustment here.
The first will adjust where along your calves the cushion will lay.
To adjust the position of the cushion, pull the gray knob on the side of the cushion up.
Keeping it pulled up, simply move the cushion forwards and backwards.
When it's at your desired position, release the knob to lock it back into place.
The second point of adjustment will adjust the height of the leg cushion.
To adjust this, pull the gray knob out to the right,
and keeping it pulled out, move the leg rest up and down.
When it's at your desired height, release the knob to lock it back into place.
For all the machines in this video, there are no right or wrong adjustment settings
because everyone's body will require different adjustments.
To change the weight, use the weight selector pin and the 5lb increments if needed.
When you're ready to begin, lay front side down on the machine with the cushion we just adjusted
positioned right under your calves.
Allow your hamstrings to feel the motion.
Exhale as you curl, and inhale as you lower the weight.
The front of your pelvis should remain flush with the machine.
If you are finding that your butt is moving up while you curl,
or that you are feeling the movement more in your lower back than your hamstrings,
lower the weight and try again.
As always, good form is always more impressive than lifting heavy.
Next up, we have the seated leg press, which works your quads, glutes, and hamstrings.
Here's a little peek at the machine's instructions that you can always refer to.
This machine will only have one point of adjustment, which will be for the seat height.
To adjust this, locate the dark red lever on the left side of the seat and lift it up.
Keeping it up, slide the seat up and down.
Once at your desired height, release the lever to lock it back into place.
Essentially, the taller you are, the farther you'll want the seat to be,
and the shorter you are, the closer you'll want the seat.
Adjust the weight like we have been with the prior machines.
When you're ready to begin, have a seat and place your feet on the platform.
Flex your glutes, quads, and hamstrings to extend your legs and push off the platform.
As you extend your legs, exhale, and as you return back to your starting position, inhale.
I have a more comprehensive tutorial on how to use a leg press with proper form
that I'll link down below.
I saw you sneaking a peek at my outfit, so let me give you the details real quick.
The set is from TLF, size small, tops, and bottoms.
The sports bra is the Athena Sports Bra in the color rock, currently on sale for $30,
and the bottoms are the Electra 7-8 Legging in the color rock, currently on sale for $37.
I'll have links to both of these pieces in the description.
Unfortunately, my discount code is not applicable on sale items.
We're going to move on to leg machines that you'll often find in the free weight section
of your gym starting with the angled leg press.
This machine will target your quads, glutes, and hamstrings.
As always, each machine will have the instructions on how to use it.
There will only be one point of adjustment,
which will be to lift the back of the seat up or down.
To adjust this, locate the handle behind the seat and lift it up.
Keeping it lifted up, use your other hand to lift the back of the seat up or down.
Once at your desired height, lower the handle back down to lock it into place.
Instead of a weight stack, you'll have to add your own weights manually.
Do this by locating the plates, which are these circular black things
that have the amount that they weigh written on their sides.
They'll often be found together like you see here on this rack.
Select the plates you want to use and slide them onto the metal bars
When you're ready to begin, have a seat and place your feet on the platform.
There will be a lever on your right.
When it is turned straight up like it is now,
it is locked in place, keeping the weight up in place.
To unlock the machine to use it, push the platform that your feet are on up slightly.
Then, turn the handle over to the right.
From here, the machine will be unlocked for you to use.
As you push your legs out, exhale, and as you lower your feet to your chest, inhale.
Keep your feet flat on the platform at all times and make sure to never lock your knees.
When you're ready to get off the machine,
make sure to lock the machine back into place
by turning the lever on the right hand side back to the left.
Next up, we'll be reviewing the hack squat machine.
This machine focuses on working your quads.
You'll add weights just like the angled leg press.
If you're unsure of how much weight to use for these machines,
simply start with no additional weight at all and see how that feels.
If you feel as though you can comfortably add more weights while maintaining good form,
feel free to do so.
When you're ready to begin, stand on the platform with your back on the backrest
and the shoulder rests right on top of your shoulders.
Place your feet to where it is most comfortable for you.
This will just take some experimenting and trial and error.
Just like the angled leg press, the machine remains locked until you unlock it.
To unlock it, press the two handles on either side of the shoulder rests towards your face.
From here, you can begin the exercise.
Inhale as you go down into the squat and exhale as you return back to starting position.
When you are done with the exercise, lock the machine back into place
by pulling the handles on either side of the shoulder rests out away from your face.
The final machine we'll go over is the V-squat,
which targets your quads, glutes, and hamstrings.
There will be no points of adjustment for this machine
and you can add weight to this machine just like the previous two adjustments over.
There are two ways to use the machine.
Facing the machine and facing away from the machine.
We'll go over the first way now.
Stand on the platform facing the backrest with feet to where it is comfortable for you
and shoulder rests on your shoulders.
When you're ready to begin, you will need to unlock the machine
by pushing the handle on your left down.
From here, place your hands on the handles to the sides of the shoulder rests
and proceed with the movement.
Inhale and contract your core as you go down into the squat
and exhale and squeeze your glutes as you return back to starting position.
When you are done, pull the handle on your left back up to lock the machine back into place.
For the second method, stand on the platform with your back to the backrest
and feet to where it is comfortable for you.
Everything will be exactly the same except you're facing the opposite way.
Push the handle down to unlock the machine.
Inhale and contract your core as you go down into the squat
and exhale and squeeze your glutes to return back to starting position.
The main difference between these two methods is that this one will be more glute focused
and the other is more quad focused.
Try both and see which one you like better.
Thanks so much for taking the time to watch this video.
Of course, if you found it helpful, make sure to give this video a thumbs up
and if you haven't already, subscribe to my channel and turn the notification bell on
so you don't miss out on more helpful videos just like this.
For more helpful videos on how to use gym equipment,
make sure to check out my How to Use Gym Equipment playlist that I'll link down below.
For daily fitness and workout tips, like me on Facebook and follow me on Instagram.
See you guys all again next time.