Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
ladies and gentlemen this is Joe's
classic video games back with another
cool arcade game video for you today
we're going to work on a really cool one
today you've probably already read the
title didn't you did you read the title
no
we have a key games
also known as Atari so Sprint two
arcade game here
they call this Sprint too because Sprint
one had one steering wheel this has two
steering wheels
so we picked this up a little while back
with the some other stuff this was in a
Meat Shop was it a meat chop Joe
butcher shop this was in a butcher shop
um
and it's been abused a little bit and
it's oh it's from the 70s but that's the
ones we like right so we're gonna fix it
up
and you're going to see us do it on this
video
so stay tuned uh but I'm going to show
you the condition that it's in as we
brought it in
it's got some damage to it unfortunately
on this left side I'll show you here in
a minute
a little rusty
but this should clean up nothing a
little black paint won't fix
Windows beat up a little bit
but
pretty complete
control panel
is in decent shape
a little bit of wear there but it's just
black silk screen so you can touch that
up
um
it's had some issues with steering
wheels we'll we're going to do a whole
freaking video just on the steering
wheels
but you can see see this tape residue
here that's because these things break
the housing
and it just gets it all screwed up
um
and for years they've been selling New
Old Stock ones of those and stuff and it
just it's a problem with a whole bunch
of Atari games including this one
um
but we uh we were able to get a
gentleman to make a 3D printed one so
we're going to try that out in another
video so you will be seeing that coming
but that's what the tape residue is from
that must have screwed up and they had
something rigged up over it trying to
hold it in place or something
got some surface rust on these Wheels
we'll see how clean we can get those to
look
and then also this one has
bolts like a set up a certain way
and then they're set up a different way
on that one so we'll have to figure out
which is correct
we got the two four speed shifters that
both look like they're about right
push button to select track single
player start only double player start
only Joey and I we're brothers of course
whenever we were younger we had one of
these that we bought at an auction and
uh
had in our house for a while this is a
cool game
it's got the original cardboard bezel
under the Plexiglas bezel here
its day has finally came
so the cabinet itself is a little rough
on this side you can see where it's
busted apart at some point
we'll uh see what we can do to fix that
up
help it out a little cosmetically but
it's not the end of the world I mean
it's got crazy cool side art of course
still got the back door for it
the cable has been cut off
power cord
and here's the problem
whoo
so we're going to do a video on the
Cosmetics we can fix that it
it's pretty bad but so why would there
be a big hole in the side
because people want them ins that's why
so uh somebody
has broken into this poor thing to steal
its quarters that's all right it found
its way to a good place we're going to
fix her up
this game was made by Atari
in beautiful Sunnyvale California
and it's serial number 5297.
SP2 Sprint 2 5297
made in the USA
runs three amps through this sucker
and it may be covered by one or more of
the following U.S patents
don't try to copy it
all right so it's got the big old
25 inch
I believe that is the Motorola monitor I
may be wrong about that
I believe that's the XM 701 that's my
guess
let's see on live video if I'm correct
about it
it's either the XM 701 or it's the
m7000.
um
doesn't say
maybe to say on that side
m7000 it is
it Motorola that's Motorola right
that's what the M must be for
uh black and white monitor
old school it's got the the shallow
black and white tube
the deflection angle is different on
um
color ones or most color ones look how
thin the yolk is
pretty wild
uh so hopefully that will cooperate
one thing I see is this high voltage
diode
has popped out of its socket
fix that
all right so the good thing about these
early Atari games is the electronics are
real simple so the power cord comes in
here
and comes up to a
power switch and another power switch
and some stuff
and uh
comes up here to this Transformer and
some fuses
and then jumps over here to this board
and I think I saw earlier
this appears to be the original
FCC filter board so that would have been
right there
and the plug plugs on the top and as you
can see running AC through that edge
connector
has caused them some problems
but they're still running Edge AC
through the edge connector it's just not
on the filter board
so they have it looks like soldered some
of the wires to the board
instead of running them through the edge
connector
so we'll have to mess with that
this is all
wait man misspoke I was about to say no
processor but I see something up there
I can't pull it out because it's
soldered in let's go in dude
why hello Mr processor
that's some kind of processor it looks
like
why hello Mr RAM chips Maybe
what pulls us out here shortly
so that's what we're looking at
so uh
gonna be a cool one to fix
stay tuned okay folks so good old Atari
key whoever
I always did a great job with their
early schematics they're even their
lighter ones are good too but the early
ones especially they tell you every
little thing
so hopefully we can figure out how to
fix it with the schematics so uh here is
the relevant part with the the wiring so
it says AC input here on the right
that's the part that's cut off
okay so it comes in and it just runs
straight through an interlock switch
now the reason the purpose for that
interlock switch is uh if the back door
were to fall off in the arcade or some
kids screwed around with it and knocked
it off it would kill all the power
so hopefully the little hellions
wouldn't electrocute themselves
so that switch fails open right then you
can pull it and lock it and lock it on
if you're servicing it
okay and so that's in there and then the
on off switch is it looked like in the
front somewhere where you could reach it
maybe underneath the uh
it looked like the right uh gas pedal
so you've got an on off switch and then
you run into a line filter
then you have a three amp fuse that it
runs through
and then the two lines
go through a shorting block which is
just a little connector with jumpers on
it the reason for that is so that they
could it was an easy way to change the
wiring on the Transformer so you could
have a Transformer that could sport 110
220 105
240 all this stuff depending on which
jumpers are installed
so uh
the the black and white lines will go
into that
and then once they get so like for
instance the black line is the hot once
it or the line voltage it would go to
here which splits into two lines and
then also up to here which is a third
line
okay so one of those lines
Powers one side of the Transformer one
of the other lines Powers the other side
of the Transformer and then this line
comes off
and runs up here to power the monitor
they also have a fluorescent light for
the top that's wired into the one of the
windings on the Transformer the inputs
all of this likely is still fine
it's just they cut the cord off now why
would they cut the cord off
something's probably shorting or making
a big loud noise or somebody stole the
cord or something
so once it does that the Transformer
will create several voltages that run
all over the place okay so we're we're
concerned with this right now so one
thing I want to do though is I'm going
to go ahead and unplug the monitor
because the monitors are kind of
hard to get right so I don't really need
that monitor burning itself up
if I can help it so I'm just not even
going to plug it in for now until we get
the thing to come on
and act right okay so uh
looking at this it doesn't to me there's
really no if I unplug the game board and
unplug the monitor there's nothing to
really burn up except the Transformer
but unless it's been hacked that that
shouldn't happen
so we're going to unplug the monitor
unplug the board and try to get a new
power line on there if we can find one
around here we didn't have a new cord
but we had a used cord what do you got
there Joe that's a pretty good one yeah
it's period correct period correct new
end on it no Cuts looks good it's a
little discolored right there Joe once
you get some bleach discolored too
you know he's got a good point that's
what I'm saying it's and I like that
it's gray you know okay so we have the
interlock switch turned off so the way
that works is when the back door is on
it's pushed in
which connects them when the back door
pops off it pops back out so the little
kids don't get killed
but uh you can pull it out to turn it
onto and it'll lock in place so it can
pull out or be pushed into connect so
it's off right now so Joe's going to
plug it in
okay we've got the board disconnected
but some of the power is still connected
to the board because they soldered it to
the board that's fine I think it'll be
all right okay so all we're going to and
we unplug the monitor all we're going to
do is turn it on and just see if
anything happens if it blows up
if the Transformer makes a bunch of
noise
if the light works stuff like that all
right Joe go ahead
nothing
you think maybe it's turned off
yeah it's probably turned off
I think there is a power switch down
there
send me on a wild goose chase there's no
power switch
looking it's probably in that hole yeah
it might be look in the door I'm pretty
sure I saw a power switch
down there on there by that foot pill
if you look in the back you can see it
uh-huh you see it
there's something down there
nothing it could be the lights don't
turn it off it could be the light bulbs
burn out yeah if that power switch is
down there probably nobody's ever even
known it was there okay we need to
unplug it and see if the fuse is any
good probably
all right we're gonna mess with we'll
see what we can figure out
okay folks so the fuse was blown uh it
says right here to take the cover off to
replace the fuse but you can get to it
from the front too did it Blow again Joe
I don't know we're checking uh voltage
on the Transformer to see if we're
getting any power
nothing maybe the switch again I think
we've been playing with the switch so we
think it has to be stripped again
okay all right folks it's our first sign
of life
is the
the fluorescent bulb is starting to come
on very cool all right so uh
I think next maybe Joe
is uh we plug the board in see if we
hear any sounds
I doubt it everything's so filthy in
there
this thing basically it
has a voltage regulator on the main PCB
okay
now why would the fuse be blown it could
be they cut the power cord or they
screwed something up whenever they
were trying to break into it
okay uh maybe see if you can credit it
up Joe oh let me show them the lights
so we have the three lights lit up
she's trying
all right so she needs work
hit the button though before she Burns
herself up
okay so old capacitors are ruling the
day
we're gonna have to take the uh the
board out and work on it a little bit
Jim I'd like to kind of hear it play
first before we uh
before we plug the monitor up you know
what I mean I mean we know it ain't
working right
okay so we're going to cut the wires
that are soldered to the board and
figure out exactly what they did with
that we're going to clean up the board a
little bit replace some capacitors and
get it where we can actually test the
voltage on the board
all right folks so here is the board so
if you look in the schematics the uh
they don't tell you what the mpu is but
for what I understand it's a 6502
uh yes
it's a old school
6502 look at that sucker
December of 1976 Joe what do you think
boy wasn't that a good time it sure was
Christmas baby it's a Christmas baby and
this uh this look at that freaking
socket
what do you think about that socket Joe
that's when they knew how to make a
freaking socket look at that there's
little elves inside of there connecting
everything together
okay and then we have ROMs soldered to
the freaking board
this 36th week of 1977 and this one was
the 49th week of 1977 I believe
I guess that's what that means
okay
boy that sure looks like it might be a
ram chip you think that's a ram Joe
probably it's probably a ram people
all right so uh what is the problem the
problem is going to be
foreign
soldered here here and we think here
no there
which seems to be the ground and the two
16.5 volt AC connections
okay I'm gonna go in there I guess they
run through diodes
yes yes they do
and then they run into this voltage
regulator
which is a
it's an lm323 Joe that's it you should
have known that yep seen it a hundred
times
lm323
. it's all right
okay um but here's the problem they
always put these big filter caps on here
and these things get all screwed up
that's probably the whole problem
probably what do you think about that
being the whole problem
that's probably the whole problem
okay so what are we gonna do we're gonna
clean up the board a little bit
um we're going to take the
CPU out of its socket clean it and then
put it back in a second Joe will you
give me that chip puller they probably
want to see that let's see what it looks
like inside that huge freaking socket
it's in that drawer on I think it's on
the left side again it's sticking up I
saw it just a few minutes ago
we're going to pull this chip
but we need the chip puller to pull the
chip this connector on the side on the
Atari boards was used to connect like
some of their uh test equipment
but I don't think anybody usually had
them
out in the civilian world
we used to always use a regular
screwdriver but somebody mailed us a
chip puller and now we're spoiled yep
we're spoiled we got to have a chip
puller we ain't using no damn bent
screwdriver anymore
I'm trying to do it with one hand
go ahead Joe show them how it's done
you think tinny son's watching this that
sheepdog oh yeah yeah you're supposed to
give a shout out Denison Tennyson
Tennyson's the Sheepdog is watching us
we're supposed to give a shout out they
gonna see me break don't you break that
chip that's a valuable one too yeah give
it to me you want me to break it
I think I might need my regulars yeah
that screwdriver is failing on this we
need her this was before
if you wouldn't have said that Joe it
would have worked perfect he jinxed us
people he jinxed us bragging about the
uh
bragging about the uh
the socket's too old it can't use that
chip puller that chip puller is for
modern devices
don't break those those legs Joe don't
do it no matter what you do don't break
it these are solid gold okay
okay now remember which side goes where
goes that way
where's our where's our Mark here
I'm all screwed up there it is and one
pin one right there people here's what
the underside looks like
okay
and then here's this big old cool
freaking socket man why don't they make
them like that anymore this is probably
like a 25 socket
look at that
what do you think Joe should we change
that out for one of these new cheap
pieces of crap from China no way
[Laughter]
or grabs at chip I don't even think
about it I don't see much to clean there
what do you think
we'll just put that back in there that
looks that what we're gonna do all right
so uh
here we have
a 4700
micro farad 25 volt DC capacitor
we're gonna swap that sucker
and here we have
an 8 000
microfarad 16 volt capacitor and here we
have the one that looks a lot a lot like
it
also an 8 000 microfarad capacitor I
wonder if they go to the same place they
do now look
they're across
foreign
they're both on the same
and this side they're both on the same
you know what that means Jim
yeah
right yeah they're in parallel that's
right so you can replace two with one I
knew that you see how to do that yeah
put it over here and over there you
don't have to do it over here over there
over there and over here that would be a
waste yep try to waste of time now
people are going to reply down below and
say well actually there's a reason they
do that it said out of one fails the
other one and all that right but people
you're not here right now so you can't
stop us from doing what we want to do
we're going to take those two out and
put one in its place
all right so uh that's what we're
looking at and these things they just
get old you can see they're starting to
fall apart they're literally falling
apart
look at that
ugh
look I lost the focus if I'm gonna Focus
back in people want to see this there we
go
look at that
that's got to go folks
so that's those two and then here's our
third one
that's a good side that's its face
look at that
it's lasted long enough folks
that's probably why the sound was
changing as it went along and it was
getting louder
all right so we're gonna work on this
board a little bit and uh then we're
gonna put it back in and we've got to
test the voltage regular somehow we have
to see what kind of power we've got on
the actual board
so here's what we're gonna do this this
is a 4700 radial I mean axial so we're
going to replace that
no matter what y'all say
with a 4700 axial and then this one
eight thousand and eight thousand is
sixteen thousand
and we're going to replace that with an
eighteen thousand no matter what y'all
say
that's the next step
new capacitor new capacitor I put new
ones here too but I didn't have axial
ones and there's traces all over the
freaking board so I had to put heat
shrink tube on the legs so it wouldn't
short
okay uh and then I'm also going to
replace these two uh rectifying diodes
these things are old and they get leaky
I don't know what they are
but basically if you put a beefy enough
replacement in there you're fine so I
always use 6a4 just because I have a ton
of them so I'm gonna put two six a4s in
there and we'll see what the old ones
were
okay so the originals are Mr 501s
let's see if that's what they actually
are that's what it calls for on the
actual
in the schematic
these are mr751 so
just goes to show you they can swap them
with whatever they want I guess
see if that one is too
yep mr751
all right I looked up Mr 501 so let me
go check mr751s to make sure I know
exactly what these are
okay I looked it up so the it calls for
Mr 501s but it has
mr751s the difference being these are
beefier they're six amp
and they are fast recovery
I just put in six a4s which are not fast
recovery however I don't think it needs
fast recovery
according to the specs that don't need
fast recovery so I think we're fine but
you gotta the the
rectifying diodes you've got to change
or you'll have trouble on the five volt
line now on these two here
are actually the audio ones they may be
Troublesome too but if you have problems
with them just your audio won't work
you'll lose your audio voltage but on
the five volt I always replace these
just because they uh
they give you a lot of problems on these
and uh like stuff like asteroids they
have them underneath the power block
okay so uh I think we're about ready to
try it though but we're gonna have to
clean up the edge connector it's not
actually burnt it looks pretty good it's
just dirty and then the connector that
plugs in those wires that they cut we
need to re-pin and put back in the
connector
um
yeah I'm not going to solder them back
on the board you know it needs to be on
something that can be removed the reason
that those burnt up is because it just
uh when it gets dirty and then two they
ran it for
probably 20 years till the thing blew up
right whenever we sell this it's likely
going to go in somebody's house where
they won't have that big of an issue if
they do
eventually they can replace the
connector if they need to but
look it's an old board people you kind
of got to go with what you got
um but none of it's damaged enough that
it needs to be uh
um there's really there's I mean you can
put tape on it and stuff but it's not
damaged enough that it needs any kind of
repair
okay folks so looking on the schematics
um there are two 16.5 volt AC lines
going to pins three and four that was
two of the ones that they cut and
they're reversible it doesn't matter you
know because it's coming from the
Transformer and then there were two
grounds that goes to pins two and B
that they have tied together the grounds
are just the center tap of the
Transformer winding so those two
go in 2 and B one two three four blah
blah and then the other side it's a b
bubble so we're putting them back
crimping new
um
connectors on it
and pop them in there now if you need
connectors we use this little
uh crimper
we like these we have these linked on
our website go to Lions arcade.com to
the parts page and there's links to
stuff like this we use in our repair
videos
that you can get like on Amazon and
stuff like that it'll send you to Amazon
if you buy anything on Amazon what could
they buy on Amazon Joe
anything anything you could buy a
toaster cat food cat food dog food both
types
um if you buy anything on Amazon after
following one of our links it gives us a
tip so we appreciate everybody that's
been doing that it's even if you don't
want to buy crimpers or whatever and if
you need the actual crimps you can get
stuff like this from twisty wrist arcade
it's a
good site that sells a bunch of stuff I
got so I'm going to put the rest of
these in and then we'll be ready to plug
it back in and fire it up
boy it's loud
okay we're gonna have to get brave
enough to turn the monitor on eventually
Joe okay so next up we need to check the
voltages on the board
and see if uh R5 is working or not
okay I can't show you very easily but
I've got 5.09
on the IC chips on the board which is
perfect a little bit high but that's how
we like it
okay uh
so we're ready to try to plug the
monitor in
which may have catastrophic effects but
we'll find out
okay Joe you ready yep let's do it come
turn her off
plug her back up
and I'm Gonna Stand Back
and show them what happens when we turn
it on
go ahead
got neck glow at least let's see if we
get fire on the back of the
monitor
the hell was looking at the screen
picture people we want to see if the
monitor catches on fire
we can go look at the screen anytime
you got anything Joe
gibberish
all right he says they're gibberish
let's see what it looks like
Hit the Lights yeah
okay
boy I don't like that
could just be a sink thing though
okay so obviously the program is not
running so we're going to have to
troubleshoot that next but that explains
why the sound is doing what it's doing
we don't know if the clock is running or
any of that
all right folks on the front door of
this thing
it's all beat up
which a lot of times isn't that big of a
deal but on this particular game on some
of these older Atari games if the coin
switch isn't hooked up right
it will cause you problems because the
game
is kind of designed where it needs the
coin switches to keep it out of reset so
it had a wire
unhook there look it's got two wires
shorted here
and so sometimes some games I see this
on pinball machines too On Em pinball
machines
if the coin door switches are shorted a
lot of times the game will not run right
one more modern like Jama games if the
coin door switches are messed up the
game just won't um
coin up but it'll come up and run this
thing is mangled
so I'm probably going to replace these
connectors obviously all of this needs
work
but I'd like to test if that has
anything to do with it
coming up all jumbled
let's see if that helps anything let's
try turning it on
um it sounds better
it's not making our loud noise anymore
at least
yep look
it's so bright up you can't see but
yeah she's up and running
wow
going door switch people
why in the world
that is strange we might we ought to
look that up and see why it does that
okay so I don't completely understand
how it works but if you look at one of
those switches there
it's got a ground connection
that comes out and connects to both of
the switches one of those was
disconnected
okay and that ground is always connected
to the
um
coin input
so the coin input is always grounded
you can see that there is a pull-up
resistor here on the
the coin input
okay but because of that normally closed
log on the switch
it's always grounded
okay so when you drop a quarter through
the switch comes over here and grounds
the play meter
but what it really does is it allows
this line to go high
so whenever the input goes High
and then it goes back to ground
uh it registers that as you put a coin
in gives you credit
so like here's one of the inputs it's on
a 153
that's just how they've designed the
thing so what happens is if that wire is
broke off or the switch is messed up or
bent or something like that the thing is
constantly giving you a credit and it
don't like that
and so the board won't boot
a very strange
and let me show you something about the
Sprint schematics and how they detail
how things work so there's a section I
believe on how that works
okay so the early Atari schematics were
notorious for being so well written out
that they explained every little thing
so it's pretty cool now I don't
understand all of this but it's you can
just see the level of detail they gave
you and they they put this in the
cabinet
so everybody got this this wasn't secret
information that they hid they wanted
you to know how the thing exactly how it
works
so it says the main component of the
manual control interface is multiplexer
M8 this component acts as a two-pole
four position switch operated by address
lines adr6 and adr7 from the
microcomputer mpu table 4 3 lists the
input output relationship of multiplexer
M8 with the given address inputs
multiplexer M8 interfaces three
different sources of information as
follows one coin information two
steering information and three switch
information all information is received
by the microcomputer mpu when the mpu
addresses the address decoder for a low
logic level switch not switch signal
that enables Tri-State devices K5 for a
data output on the D6 and D7 data lines
coin information is a matter of storing
in the microcomputer Ram the number of
times a low logic level pulse appears on
the data lines when the appropriate
address input of multiplexer M8 is being
addressed the microcomputer mpu only
looks for when it's being addressed the
mic I forgot to put the right uh
phrasing there the microcomputer mpu
only looks for coin pulses during the
attract mode I got to be honest with you
somebody walked by out front so I
noticed
okay so it only looks for these coin
pulses during the trackboard so it says
it it just stores how many times a low
level a low logic level pulse right but
remember I don't know if you saw that it
runs through an inverter
um
let me go back to that
just so we get the whole thing
let's get the whole thing here
so it's high but it inverts right there
so it's the number of times that it gets
a low level up here right
uh which it would get if this line goes
high but this line won't go high if it's
tied to ground
right
back to where we were where were we
it's up here somewhere
just telling you how the
motor is generated
so it's got everything on here right
steering information is looked for by
the microcomputer mpu during the play
mode the steering printed
Circuit Assembly consists of two light
emitting diodes
that are optically aligned
with two light sensitive transistors a
tooth cylinder that is turned by the
steering wheel is inserted between the
light emitting diodes and the
transistors and interrupts the light
from the diodes when the steering wheel
is turned two pulses appear at the
output of the steering printed circuit
assembly the difference in phase as
Illustrated in figure four six when the
wheel is turned to the right the a
output pulse leads to beat output pulse
when the wheels turn to the left a
outputs both lags the B output both the
inverse of the two pulses are applied to
the D
and clock inputs of 2D type flip-flops
see the schematic because they give you
the full schematic so anyway you see
what I'm talking about they tell you
every little freaking thing they tell
you exactly
switch information is received by
multiplexer M8 and inputs one Co and two
Co so what they're telling you the
freaking pin that it's coming in on
the microcomputer mpu addresses decoders
F9 H9 and j9 to determine if a switch is
opened or closed if closed a low blah
blah blah you see what I'm saying this
is the gold standard
of
um of
operator manuals for this kind of stuff
it's a damn shame that when you get
something now it doesn't have any of
this they don't want you knowing how to
fix the thing they want you to throw it
in the trash and buy another one from
China
right but these were the days people
1975 or 1976 whatever it was that's
before my time
I was but a gleam in my father's eye in
1976.
so anyway uh
that's why if the coin door switch is
unplugged
the pull-up resistor on the board means
makes it where the board thinks you're
constantly getting a quarter
just how they designed it so it looks
like the board's up and running
um
we need to work on the monitor do some
more electronic stuff to it of course so
uh and we can't
test it yet because the steering wheels
are all screwed up
I mean I guess we could try to play it
so we don't know if any of the sounds
right
the uh monitor hasn't been rebuilt looks
all right though
um
and we don't know if any of the switches
or the gas pedal or the steering or
anything works the steering we know that
the housings are cracked on so we have a
solution for that we're going to do a
whole other video on the
um we're uh working with a guy to make
that happen finally for all of the Atari
fans okay so uh let's see if she coin up
easy peasy okay here we go
now on this particular game the first
player is actually on the right the
second player is on the left
old school baby
okay push start button push button to
change tracks I've got that button that
popped out of the control panel so I
can't reach it right now so we're just
going to try the original one
and there we go
look at that
oh I'm not in the right gear
I'm hitting the walls
ah
oh no
that's right that's right now what oh
man I hit the walls again
I wasn't never any good at this you know
who could play this my brother Donnie
all the driving games he was great at
if you haven't seen his channel
my brother has a channel here on YouTube
my brother Donnie the link is down below
all of our videos
you can see uh
he's crazier than I am
I don't know if he's crazier than Joey
though look I'm a granny it says ugh
it's so embarrassing and I did it on
live television
okay so check out my brother's Channel
my brother Donnie now this one we're
going to have to
we're going to have to do some more work
on I mean it looks like see this is the
point where a lot of people would sell
it and say Works 100 percent
Survivor super rare come on people we
can't do that we got to fix it better
than this come on now okay come on
people
so uh we're gonna do another video where
we do the Cosmetic stuff and we're going
to do another video where we do the
steering housing there is a plastic
piece that the steering that makes the
steering wheel work uh that as you can
see and this one's still functional but
it's all broke up and everything the
steering wheels are trying to fall out
of the game
so uh we have
we have found a solution of that so
we're going to do a video on that
hopefully to help everybody else that
has an Atari
game that needs that steering housing
maybe theirs is cracked up too but we'll
do that on a further video hey folks do
you want to know how you can support our
Channel if you enjoy great content like
this look how it's changing all of the
tracks that's pretty cool
12 different tracks it says freaking
straight up attract mode in a 1976 game
deal with it
um
you know you can support our Channel if
you're going to buy anything on Amazon
we have a link down below to Amazon if
you use our link they count that as we
sent you to Amazon so they pay us a tip
for doing that
and it's a certain percentage of your
purchase so if you're going to buy
anything on Amazon if you just click our
link before you do it you give some of
the money you were already going to
spend so you don't have to spend any
extra money or anything
to us for doing that so we appreciate
people that have been doing that really
helps us out makes us want to make more
videos you know what I'm saying and so
uh we appreciate everybody that's done
that somebody the other day bought a new
cell phone on there and it was kind of
expensive so whoever did that thank you
but people buy a little stuff all the
time on there too and that's just fine
so
um I hope you enjoyed the video this is
kind of cool seeing this thing come back
to life did you notice
that ultimately the problem was
a wire was unplugged on the coin door
that's how solid they built these
freaking things now it's probably going
to die on me now that uh I said that but
somebody had vandalized it and cut the
cord off of it
hey uh I talked to Joe and whenever he
talked to the guy that he got it from he
said that that's what they were doing
people were breaking in and stealing
copper we're fortunate they didn't steal
the Yoke off of the uh tube a lot of
crackheads will take a hammer or
something and uh
uh break the tube on a TV or anything or
something like this just to get the the
block of uh copper off the back of it
that is the yolk but they didn't do that
to this one uh so someone had cut the
cord off
uh what else did we do
we plugged in a wire
I gotta admit I did uh turn some knobs
on the monitor to get it looking like
this
oh the few the fuse was blown
replace the fuse
we worked on the board but it you know
it may have still worked without doing
that you know those two diodes tested
fine but I just replaced them because
they were old
um
and the caps
looked like crap but they may have still
been working
this is just well built stuff 1976 it's
still up and running very cool so on the
next video we will do the housing thing
and then we will have to fix that big
hole in the side and repaint some of the
side Arts so we'll see you then hope you
enjoyed it give us a thumbs up for
taking the trouble to film it for you
and we'll see you on the next video