Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
ladies and gentlemen this is Joe's
classic video games back with another
cool pinball repair video for you today
we've been working on this cool got live
out of sight pinball machine
it's a two player from sometime in the
wild wacky 70s and uh it looks really
cool let's see what is the date
apparently at least the artwork was made
in 1974. cool game
we did a video already where we kind of
looked over the condition that it was in
when we got it in
and we worked down in the bottom of it
and we've got the thing starting up with
some lights and stuff but it's not
really playing very well
um
I'll reset it
you can see kind of what it's doing
it started up for us
but then the uh after the first ball it
wouldn't kick back out or something
so it says game over and tilt that's
what it should say whenever you
turn it back on in the middle of a game
so we're going to hit the start button
[Music]
all right
so it says ball and play
number two well that ain't right
one player
so it's scoring on the first player
they don't kick the ball out
it went to player two
you can play at the same time
gave us game over and threw up the match
number of 60.
and that ain't right so it just ain't
working right but all we've done so far
is work through the bottom on the bottom
Mech so the next thing we're going to do
we're going to slide this thing out from
the wall we're going to start working in
the back box especially that player unit
that's in there that very well may be
the source of most of our trouble so let
me slide it out from the wall and we'll
work back there a little bit
all right so we pulled it out from the
wall now
we looked at this a little bit in the
previous video but there's really not a
lot back here if you don't
um work on these much you might think it
looks scary but
there's not that much you have the Jones
plugs down here that we've already
cleaned
you have three four relays or three
relays and a
Little Match unit
uh and you have eight score reels
because it's only a two player game
you have the replay unit
keep track of
how many credits are on the game
and you have this player unit up here
this is probably our main issue is on
that
but we're going to work through all of
it because we got to clean all of it got
to make sure it's all working right so
the first thing I'm going to do just to
get it out of the way is I'm going to
clean these relays
so same thing we always do we use we use
a little file to clean the contacts on
the actual relay and then we make sure
that whenever it closes that the
switches are closing if they're open or
if they're already closed we make sure
that they open
and you just want to go back and forth
so I'll mess with that a little bit
and if I see anything
that looks like it was a problem
I'll highlight it
okay folks here's a closer look at that
match unit I was just talking about I
assume that's what this is it may be you
being since it's in the back box that's
probably what it is but sometimes they
use this um
to control like a bonus unit or
something but the the thing is it can't
really do much so it's got one board
that usually will light up a light
and so you have one thing is being
grounded at a time so as this spins it's
grounding one light or the other
and then on this side
you can do you know
one little bit of math so that's why
it's used in the math the match circuit
if this is turned on if this is enabled
it can tell okay so if this is a five
it's it's sitting on the five and on
this side the five is lit up or whatever
so I can do one little simple thing
um so they can't use it for much but
they sometimes use it on like a bonus or
a match unit so it's this neat little
Contraption where it's a coil they're
calling it The F relay
and when this pulls in it pulls this
plate
like that
and then this little nylon tooth pushes
this little nylon wheel
all right and it does it very fast and
violently
and you kind of just need to make sure
that the
the tooth is lining up on the uh
the contacts but you only want it to
line up on one you don't want it to hit
two at the same time
boy it's close
is it hitting two I can't tell
nope it's just hitting one but it's
close all right so you got to watch that
and uh you need this to be clean this
this little board here so I typically if
one's working real good like that I
don't take it apart but you can if you
think these screws loose you can take
this little retainer off to where you
can easily get to the board but
um so I probably will do that because
it's so easy but
um I'll just use a little piece of
sandpaper clean it up a little bit now
if you look someone has already done
that
and they have a little bit of some kind
of grease on there something
I can feel it's a little oily
um
so what we do is now on this particular
one you don't use much of this but we
use this stuff
Synthetic Grease
you don't want it on there real thick
though you just basically want it to be
just a very thin coating because you can
actually create friction where the uh
the little
um
contact can't run through it because
you've got so much of a build up so
um
but let me try uh let me try taking this
down and cleaning it up and I'll show
you how we get it to look
okay so you can see on this particular
one that they have plenty of room for
adjustment built into the board so where
you can rotate it
to get it where the little wiper lines
up just right
okay
so I cleaned it up a little bit
let's put a little grease on it
just a little bit not much at all
now let's clean the uh
contact
all right now you can see how much
adjustment there is so if you get it all
out of whack where you don't really know
how it's supposed to be if you look
sometimes you can see wear marks or dust
patterns and you can move it back
more towards
how it appears it originally was give
you a good starting point for it
so this is the other side you can see
that there's like an oily
something underneath where that switch
thing was the retainer was
so they probably sprayed something on
here at some point
a lot of times people will use like
WD-40 or something it's horrible don't
do it don't do it people just don't do
it if you want some of this stuff though
if you want some of this amazing Super
Lube synthetic grease I'll tell you
where you can get it you can get it on
our website go to Lions arcade.com
there's a parts page
and we have links to this we don't make
it or anything
um
if I can get the cap to go back on we
don't make it or anything we just have
used it for years and really like it so
am I going the wrong way
well I can't get the cat back on
this is horrible
there we go
it's good stuff made in the USA too if
you like if you appreciate that
Cinco makes it it says
um good stuff so yeah check it out
lionsrk.com we have a parts page we got
a bunch of stuff like this on there if
you follow the link on the parts page to
this it's on Amazon though so it takes
you to Amazon and if you're going to buy
anything on Amazon uh if you use our
link to go to Amazon it gives us a tip
so thank you for everybody that's been
doing that somebody the other day about
a i
a Google pixel phone about a new phone
kind of expensive and they used our link
whenever they did it so we appreciate
everybody that doesn't
um so anyway back to this I saw I'm
gonna put a little bit of that on here
and then put it back together and then
we have to clean up our Jones plugs okay
it looks nice and clean now
that part of it the other day I said
something like that and a viewer said oh
your definition of clean and mine are
completely different than probably
but
to me this is very clean
it's working as it should
looks vintage
look at that that's how you want it
beautiful beautifully moving okay and so
now we've got these uh Jones plugs so
these things get all corroded
and they just don't electrically connect
as they should
so I take a little sandpaper and clean
them up too so I did these
much better
much better okay so I'm going to finish
the other plug and then we can put this
back in and move on to the next part of
the back box
Okay so we've reinstalled that plugged
it back in
didn't find anything on the three relays
that was worth noting
we already did those
so you know very quickly we've done this
whole area right look we got that
dirt all over me
from the Jones plugs so on this
particular vintage of gottlib they also
used
Jones plugs on the side of the um
score units
so I cleaned those up as well there's
one over there
and one over here you're just trying to
get everything where it's making good
contact
um
so you don't have trouble on it
okay so that really only leaves us with
three things left so we have the
replay unit
this isn't even used on this particular
game because they've removed all of the
coin door equipment
so they have done some kind of thing to
make it free play now why would they
remove all of the coin door coin
equipment
it's because the operators back in the
day
we're real paranoid that you were going
to
buy a game from them and then operate it
and be their competition so you see it
has zero credits
okay so they would sell these to home uh
for home use but they would take the
coin Mech stuff out
in an attempt to make it where you
couldn't operate the thing
and you might think oh no that didn't
happen yeah it did happen I knew some
operators that did that okay so uh the
next thing that we're gonna so my whole
point is this We're Not Gonna really
mess with because it's inoperable
inoperable right now
um so moving on we've got this uh player
unit here
so I'm going to take
this
disc golf
and try to keep in mind right where it's
set and then we're going to clean that
up a little bit put it back on and then
we're going to drop this whole thing
down so we can look at all these
switches behind it
so uh
it is right now
where the
first pin is on the first row and the
second pin is on the second row that's
easy enough to understand
all right so I carefully took it off and
you can see that it's just basically
dirty this one was probably the the
things that whatever these contacts do
was probably still working fine
it's just dirty but we're going to clean
it up it's the same thing I'm going to
use a little bit of sandpaper on the
rivets clean it up clean that grease off
and then put new grease on it
that's more like it
okay now whenever you do this don't
forget
to clean the
little snowshoes too
snowshoes I didn't know they were called
that you know who I got that from I got
that from our good buddy Kim
and Graham over in Australia so if you
haven't seen their website their YouTube
channel it's the goat shed em pinball
repair Palace
in Australia they don't call it a palace
but I do it looks like heaven they've
got all these parts for machines that
they're working on
cool guys so go check that out if you
haven't there's a link uh we we
subscribe to them on our channel so it's
the goat shed em pinball repair
they call it a but I call it Palace
um yeah he said calls it a snowshoe
which is the perfect perfect word for it
a little Snowshoe that moves through the
snow
the grease
okay so I'm going to clean that and put
it back on and then we're going to lay
this thing down so we can get a look at
look at all that back there
okay so we got that back on
there's a coil over here that I'm
messing with
moving great it's perfect
and it lines up with the little rivets
it should
all right
perfect
okay so I'm going to take this loose
which will allow this thing to swing
down to where we can look at the top of
it
so here it is folded down and you can
see what they're hiding back here
there are five cams that are very
similar to like a Bally
uh score motor
where it rides on the cams instead of
uh the circular score motor Likes down
on the bottom of this
so it's the same old thing you just need
to clean all of the switches get all of
them clean and then as this thing turns
these little
ramps on the cams make different
switches close and open
so you can kind of go around and keep
moving it
and see if they're all doing what they
should
it doesn't mean order as well
one two
two
one
one two
three
four and that just goes around a dozen
all different times so same thing
now what does that thing do it's
involved with the balls uh ball and play
and all of that let's look at the
schematics and see if we can tell
exactly what it does
so one thing that it does is the player
unit
the the disc that the part that we clean
first is what controls the ball and play
Lights
and then all over the schematics you
have these areas where it see how it
says p5a That's player unit cam 5 switch
a
and so in this particular instance it's
involved with
the u-relay
which is
the control Bank reset relay you know so
it resets everything the game over and
first ball and all that
and then up here
P4 P3
right different switches
are involved with resetting
the um the score reels
so it's just stuff all over it that
helps it run without without a
without those they can't do them the
um
the multiplayer thing so that's why they
call it the player unit
okay folks here we are this is gatlin's
beautiful decagon score reel so the
first thing we're going to do is we're
going to take this little c-clip off
and there is a little
uh split well not split washer a little
uh spring washer under there and then
we're going to take these two screws off
here
okay so we took it apart
it has this uh
PCB over here
so it can tell what position it's on for
like the match and the high score stuff
like that uses that circuit so you got
to clean that up like the other things
with a little bit of sandpaper
somebody's already been working on it
but we'll clean that up and put a little
bit of synthetic Lube on it
and then this is all held in place with
a spring I'm surprised it didn't pop off
on me
we had a little issue
with this one just a minute ago it's
missing the spring so I hope this one
isn't
nope it's not okay so this just comes
all
and there is this
little COG
and this spring this spring was missing
from this one and it won't work right
without that spring so some tech at some
point must have forgot to put that back
in there you need it to
it basically forces this to push out
against
um the inside of this wheel
and so that's part of what keeps it from
ratcheting backwards
okay so uh basically you're just looking
to see if everything's moving freely
this one feels pretty good sometimes
you'll have a problem where it's rubbing
or something and here's the most common
problem
see how that's bent it's not supposed to
be bent it's supposed to be straight
and so people bend them over the years
to make it a little easier to turn and
stuff but it makes it where
it doesn't hang right
should be straight like that
but when you do that it puts a little
more spring on the whole thing okay uh
so we're just going to clean it up a
little bit and we're going to clean the
switches now this is the end of stroke
switch
and then you have another one that's
open all the time so whenever this comes
in the one closes
and then the other one opens
simple as that so we're going to clean
the contacts of those with a little file
and then also these here but I'll show
you these in a minute we're going to
clean the PCB
clean the wheel and just basically put
it back together you don't have to do
anything special
just get it a little clean
Okay so we've cleaned it put it back
together it's very simple process it's
not that big of a deal but the hardest
part is you need to get it where it's
moving smoothly enough
um that it properly uses these switches
here that that control it okay so we're
on one right now and all of these are
different but these decagon reels are
like this
so you have a top switch up here which
is open see through the light through
the context there
and then you have two more switches in
the middle that are the same switch
they're just they have two blades two
sets of blades so that uh it's just like
a fail safe
and then on the bottom you have two more
sets of blades that are open so this is
at one this is at two three four it's
all the same until you get the nine now
nine is the tough one so we're at eight
so we need when it goes to nine it's
going to try to close this switch up on
the top here
if you do it slow sometimes it won't
work so you got to kind of do it like
the machine does it
right we barely got there uh so see how
it's closed the top one
so at nine it's closed that switch the
middle ones are closed but the bottomans
are still open
and then when you go to zero
it is open the top one it's open the
middle one and close the bottom one so
the middle one is the uh the run out
switch
for the reset the bottom one is also
used in the reset but this top one that
closes on nine so that it can tell when
it needs to add another pulse over to
here so basically when it sends the next
pulse to this since that switch is
closed it will go from nine it will go
from zero nine to one zero by sending a
uh a pulse over to this coil to make it
pulse two
so it's how it does its counting at nine
basically
okay so uh all of those seem to be all
right but we're gonna have to play it to
see if any of them hang if I've made any
of them worse or whatever right so we're
gonna play it a little bit since we've
done everything in the back box and see
if it's finally working a little better
okay now after you do this it's highly
likely or it's probable that you made it
worse or you screwed one up or something
but you'll at least know that all the
preventative maintenance is done you can
go back and adjust whatever's not right
so uh we'll see if it how we uh fared
I've got them all set on something other
than zero so that we can watch every one
of them reset now these ones that say
zero are fake they're just false numbers
to make the score longer if you can
believe that
so we're plugged in we'll turn it on and
see what happens
what happened is all the lights came on
on the back glass
but not down here okay so let's see uh
let's see if they reset when I hit the
start button
none of them reset that's interesting
um hmm
that could have been because of where we
had the player unit
Let's uh let's have the game
and we'll try it again
what'd we do so basically what's going
on is the uh we need to get it in the
game over
there's problems on the play field still
we haven't done under the Playfield it's
saying tilt and game over so let's try
it again
zero at least
all right but it still says ball and
play two we're still having a lot of
problems but
we worked through everything in the back
box didn't solve a single thing we were
having happen though uh it's basically
doing exactly what it was before now why
didn't it reset all of them the first
time why would that be
so for those to reset it has to get a
signal
through these what we were looking at
earlier these player uh switches on the
player unit
and it also has to get power through the
motor turning
um and then what adds that player unit I
think that was moving though because we
heard it going click click click I
thought is this add player unit
um
you can see there's a bunch of stuff
first player reset switches
second player reset switches
and then it gets its power
again through motor 1 a
it's just a very complex
startup
sequence so sometimes if the
ball was already in the out lane
since the ball didn't go over the trough
it may have not made it do it or
whatever so sometimes after you've been
screwing around with stuff you'll get
issues like that because you've got the
game in an unnatural State you've got it
where the ball is
in the shooter lane or you're on ball
number two or some something weird but
there's still definitely issues going on
because it's starting us
at ball number two
however I believe we're up and playing
like we were earlier you saw though how
it wouldn't advance to ball number three
so let's see if it scores now
if I could hit anything
it didn't hit that thing
didn't hit a damn thing
so you can see we've still got the same
issue it's playing on both players so
still got some things we'll have to
troubleshoot at the end but that's where
we're at so far at least we work through
everything and didn't see any obvious
problems uh as we went through it but
obviously there was still a problem
okay so next time we'll do Under the
Playfield see if that teaches us
anything uh and then we'll have to just
start going through and systematically
troubleshooting it so uh leave your
comments below make sure to give us a
thumbs up for taking the trouble to film
it for you we didn't have to do that
people
we were thinking of you we thought and
you know I'm talking about Cindy and
Steve you know Sandy I see you out there
watching
just want you to know that we're we're
big fans of you we appreciate you being
here for all of the videos Cindy and
Steve
Steve you're such a great guy
just want you to know we appreciate you
watching our videos so he's getting
ready to work on this and I said but
what about Cindy what about Steve
so we broke out the camera so I hope you
enjoyed it so far uh we'll work on it
some more uh in two days we always
upload these about two days apart so
we'll see you in two days hey by the way
don't forget to check out my brother
Donnie my brother has his own channel
here on YouTube the link is down below
and uh we're over there having a good
time A lot of times too but we'll see
you next time when we see if we can get
a little farther along on this one
this has got Liv's out of sight