How do automatic transmissions work?

Terrific Physics
41 followers
This is a model of an automatic transmission.
Automatic transmissions are one of the least understood mechanisms.
Almost all cars on the road are automatic.
So how do they work? The first thing you'll notice is that there's an input
and there's an output. In this case the input is this yellow ring gear and
yellow handle and the output is this orange ring gear.
Right now there's nothing engaged so they both spin at the exact same speed.
This is what's called direct drive where the input is exactly the same as the
output. This model of an automatic transmission
contains two planetary gear sets. A planetary gear set contains a ring gear,
planet gears, and a sun gear. If I rotate the sun gear
you can see the planet gears rotating inside of the ring gear.
This automatic transmission model contains two planetary gear sets that
share the same sun gear. Let's take it apart so we can see what's inside.
Here you can see the two sets of planet gears orbiting around the same
sun gear.
This blue part is called the planet carrier.
It holds the planet gears in place.
The important thing to note is that the sun gear is shared between the two
planetary gear sets. Also the planet gears of the first
planetary gear set are connected to the ring gear of the
second planetary gear set. Now I'll show you how it actually works
by demonstrating it. These gears on the side are actually
handles. If I hold this blue gear it'll actually
hold the blue planet carrier in place. If I hold this red gear it'll keep the
sun gear in place. By changing which gear I hold in
place it'll actually change the gear ratio of
the gearbox. Before I demonstrate how it works it's important to know
why we actually need automatic transmissions in our cars in the first
place. A car runs best at a certain rpm. This
rpm is a lot faster than we need when we're first starting out from a stop.
We have to ease up the speed of the output.
To do that we can start in first gear by holding the blue handle in place.
You can see the orange output ring is spinning much slower than the input.
Now let's increase the output speed by switching to second gear.
We could do this by holding on to the red handle. Now the output ring gear is
only slightly slower than the input ring gear.
We could switch to third gear or direct drive by releasing
all of the handles. We have now eased our way into our final speed.
Some automatic transmissions have overdrive where the output spins faster
than the input. Let's go back to second gear and then
down to first gear. First gear is slower but it gives us more
torque. I'll have these files for free on my website if you want to download
them and 3d print them yourselves. If you want to learn how to design things
just like this and learn how to 3d print them,
check out my courses in the description below. And that is how an automatic
transmission works.
