How a Scooter Transmission Work | CVT Working Mechanism

Terrific Physics
40 followers
CVT is a very common and popular transmission system worldwide due to its practicality and
as a result we often see it used in scooters. Without further ado let's take a closer look
at how it works and all of its parts for a better understanding. We'll start by looking
at the primary pulley which typically consists of two conical plates. The primary sliding pulley
and the primary fixed pulley. Moving to the back we'll also find two tapered plates.
The secondary fixed sheave and the secondary sliding sheave. More details on the secondary
sheave. We'll see a compression spring that functions to keep the sliding plates close
together. This condition forces the belt to stay on the largest diameter of this pulley.
On the other hand at the drive pulley or primary sheave the axial stiffness of the belt will push
the primary sheave to its farthest position. This causes the primary sheave to have a minimum
diameter. This is a high torque low end speed condition. Now in order to achieve higher speed
on the wheel side the diameter of the primary sheave must be made smaller and the diameter of
the driven secondary sheave must be increased. Okay let's understand how this is accomplished
in a real scooter CVT. First let's take a closer look at the primary sheave. On the primary pulley
we'll see a set of weight rollers as shown here. When the engine is at low rpm the pressure of the
spring on the secondary pulley will keep the rollers in the center of the pulley.
As the engine speeds up centrifugal force causes the rollers to move outward along the curved
surface. These rollers will work to push the primary pulley as the cam plate holds its position
forcing the pulley to move toward the fixed pulley. To make it easier to understand let's
look at the diameter changes in slow motion with sample sheave conditions that result in low torque
and high speed. As we can see in the demonstration as we mentioned earlier the centrifugal force
causes the primary pulley to move gradually overcoming the force generated by the spring
on the secondary pulley. But it doesn't stop there. This transmission system also includes a
centrifugal clutch assembly that functions to disengage and engage the rotation generated by
the engine to the wheel. The inner part of this clutch consists of weighted arms held by tension
springs. These arms are connected to the pulley or secondary sheave while the clutch housing is
connected to the output gear. When sufficient speed is reached centrifugal force causes the
arms to swing outward and the friction linings come into contact with the clutch housing.
This clutch housing functions to transfer power through the gear train
to the rear wheel until it reaches the scooter wheel.
And there you have it information about the transmission on a scooter that we can provide
in this video. If you found this video helpful don't forget to support us by hitting the subscribe
button. See you in the next video.
