How to Make a Spiral Wreath on a Dollar Tree Frame |Crafting with Hard Working Mom

Hard Working Mom
119 followers
147 Video Views·Jan 10, 2025
[Music]
hey there I'm Lori welcome to my Channel
today we're going to be
using this beautiful mesh and this
beautiful mesh and we're going to do a
another petal so since we're doing a
petal we're going to have to Wood burn
it I've already wood burned some of it
and I'm going to show you just how I do
this
now a lot of these I've seen on um
unique in the
creek so we're going to do to me they
look like fans we're going to do the
what I would call The Fan petal but
we're going to do that so when you're
doing wood burning make sure you have a
glass tempered glass so tempered glass
works better because if it shatters it's
not going to cut you but this is just a
cutting board a tempered glass cutting
board uh make sure you get the one
that's smooth because the ones that are
textured are harder to cut on and then I
have a plaid burning
tool these come with a lot of tips I
like the one that has like the little
point on it I think it just kind of goes
against the mesh much easier and of
course I'm using my hot shot because I
don't want to burn myself or my carpet
so I am going to cut them all at 10 in
so I just come up to the tin and I just
start pulling the wood burning tool down
just like that using that tip that's why
I like that tip I feel like it
cuts
easiest
okay then you can
see it kind of singes the edge so that
it
won't Fray that's what we're trying to
prevent is any kind of frays
so I'm going to show you a few and then
I will cut the rest off
camera because it's just the same
process over and over this is going to
be so
pretty now this is not going to be a
flower
wreath but it is going to be
pretty okay
it really doesn't take a whole lot
longer to Wood burn it than it does to
cut the mesh
normally it does take a few more minutes
but not terrible okay so I'm going to go
and get all these
cut and then I'll come back and we'll
start putting it
[Music]
together oh
[Music]
okay so I've gotten all of the pieces
cut and we are going to use one of the
Dollar Tree 14inch
frames and I'm going to tell you why you
want to use one of these frames and not
one of the work frames you need it to be
flat so as you can see the Dollar Tree
frame is pretty flat okay so it doesn't
have a lot of rise in it and that's what
you want for this to work correctly it
needs to be
flat I'm going to use some pipe
cleaners and I'm going to cut them in
half you could use zip ties if you
wanted to but I kind of find it easier
to
use pipe cleaners for this because I'm
going to tie them down on the frame
and we're going to alternate our colors
so we have this one that has the robin
egg blue and then green purple and white
and then this is the robin's egg blue
these are both poly burlap I really like
poly burlap for doing these kinds but
you don't have to use poly burlap you
can use deco mesh okay so what you're
going to do is you're going to take your
pieces
and you want your factory Edge right so
the edge that came from the factory that
is nice and burnt it's not going to come
apart and you want to lay it down so
that that factory Edge is on the right
then you're going to
pull the piece up to kind of make a
triangle now that nonf factory sealed
Edge is going to be on top then you just
flip it over okay so now we can see
our Factory Edge is right here it looks
really nice you'll have a non-factory
edge on the other side this is the way
it's going to go on the wreath that's
why you want the factory Edge there and
then you're just going to gather it
right up through the center and you're
going to get this nice
little curve okay so about 4 in here you
don't need to cut this off because we
can actually just hide it in the wreath
I'm going to take my pipe cleaner and
I'm going to tie it right where I have
it
gathered
okay just like
that see how cool that
looks kind of like an umbrella teardrop
jellyfish okay so we're going to do the
exact same thing with this one Factory
edge here
on the
right we're going to pull it to the
point and so you'll have your cut edge
here your factory edge here flip it over
and then just gather
it about right there so you can see this
is about 4 in here right where I
gathered it we're going to take pipe
cleaner go around it
tie it
off if you want you can put your finger
in there and kind of spread it out a
little okay again Factory
Edge pull it up to the top okay flip it
over gather it so you're going to kind
of gather it so that you end up with
this teardrop
shape or this drop
shape and and
then put your pipe cleaner around
it okay so let's do that one more time
and then I'll do the rest off
camera okay so let's do another of the
basket weave one Factory Edge on the
right pull it to the top right so cut
edge here factory edge here pick it up
flip it
over and just gather it right there
so that you get that
shape I'm going to show you why we're
doing that it's going to look really
pretty
okay
now what we're going to do once I get
these
all
ready is we're going to
take these pieces and we're going to put
them on the wreath frame right so I want
that pretty Factory Edge on the right so
so I put it like
there put that one
there this one
here this one here and you can see how
this is going to look isn't that going
to look so cool so you see how it kind
of makes a bubble look but you're going
to be able to see those little points
all right so I'm going to keep doing
these and then when we get back we'll
start putting them on to the wreath
[Music]
okay so I have gotten 18 of each one
done and I'm thinking that's probably
how many we're going to need so six in
each
section three each in each
section there six sections so 18 of each
I did look back because it was bugging
me to know what the name of this was so
this was originally the um unique in the
creek Rose so this is what she used for
the rose the first thing I can see using
it this way the spiral method was uh
this Southern girl
can and she has a really cool version
that has three mesh in it so I knew I
had seen it somewhere okay so what I'm
going to do is take my pipe
cleaners you can either go
around the two layers the two rings the
two middle Rings just like this or you
can go around one ring so if you're
using zip ties you're only going to want
to do one
ring if you're
using pipe cleaners then you can do too
and you can run this right down the
middle
because you're not going to see it so
you're basically just going to take one
go right on
top okay so you see how I'm just kind of
tying it and it's just kind of staying
right in that channel so there's really
no need to cut it off it would just be
an extra time that you don't really need
to use and then I just tuck that edge up
underneath and we're just going to
alternate all the way around
around so we'll do a basket
weave making sure you have that nice
Factory Edge on the
outside it's just going to make it look
nicer if you have any trouble tying it
around remember you can do just one of
the wires you don't have to do both it's
really up to you it's going to look the
same either way
okay you can also kind of fluff them up
if they need it and of course you can
use regular deco mesh to do this as
well
okay so let's do one section and then
I'll kind of speed through the others
I'm not going to use ribbon in mine but
I think
that Nadia might have done one with
ribbon in it so you can always go check
hers
out to see how she added in the
ribbon and please make sure you're
supporting the other wreath makers
because
yeah we are all crafters and wreath
makers and we need to support each
other
okay so tie it
on and so remember when you're using a
form like this it might look like it's
not going to fill up when you start but
it will so just trust the process
because it will
work it will fill in so see like I'm to
the end of the row and it kind of almost
looks like I have them too tight in here
but as I go around it's going to get
Fuller and so it will tighten
up so don't worry just trust the process
it will work out
fine okay so I got everything in this
section look how pretty that is see that
little
spiral so I'm going to go on and I'm
just going to keep going around all
alternating my
colors this time I'm going to go into
this new section so I'm going to skip
over and go to the new
section okay
there we go
[Music]
okay so I'm putting the last one
in I'm just going to keep up with this
same
process and then I'll just kind of go
around and make sure my spirals are kind
of
all in the same direction
and I'm going to cut off a little bit of
this
excess from this last
row there we
go okay so if you do not like the
way the back
looks there are some things you can do
you could cover it with ribbon you can
cover it with yarn felt pretty much any
of
those would work I'm not really going to
worry about it too much but I am going
to kind of just make sure that I have my
spirals kind of going where I want them
to so I want them to kind of spiral in
towards the center so I kind of pull
them down in the
center and I have a little 6 inch side
to put in the center now you could do 6
inch you could do 8 in but I really love
the spiral and I don't want to lose that
so I will go with a smaller sign so this
just says happy Easter on it I'm just
going to take my metal hole punch and
punch a hole in the
bottom and in the
top and just use some of my 26 gauge
wire you can see it's pretty
thin okay
I'll just run it right through the
hole
there twist it
on let's get another piece for the
top I do cut it too long because I'd
rather have too much than not enough so
I cut it around 20 in or so
okay there we
go okay so once I have it twisted
on I'm going to kind of move some of the
petals and just kind of slip that wire
through
there all right and I'm going to pull it
up to the second row but I'm going to
tie it on the inside right in here so
I'm just going to twist twisted
around the frame a few times including
that
crossbar that's going to help keep it
exactly where it is okay there we go all
right so we're going to do the same
thing on the other side one thing I
really like about using this kind of
wire is it's super easy to just slip it
in between things and hide it okay
so I want to go under that first one tie
it onto this last
one just twisting
it until I feel like it's on there
really
well and I just trim off the
excess look how cute that is okay let's
pull up look at
it look how cute that is is look at that
spiral look okay so I made mine pretty
full you could probably use a little bit
less than I did but I used uh 36 pieces
in
total so that would equal like a whole
roll of mesh I did 18 of
each and I think it is cool see how it
kind of spirals
around Isn't that cool I love it so let
me know what you think think and be sure
to like And subscribe and hit that Bell
icon to know when we're going to be
uploading something new or when we're
going to go live all right thank y'all
for watching I really appreciate it bye
y'all
[Music]
