Quatrain Leather Cardholder Tutorial (NEWER VIDEO SOON)

Carving and making leather goods
49 followers
Hey everyone, this is Thomas from TC Haul Leather.
Today we're going to be working on a quatrain wallet.
You can find the free template on my website and the link is in the
description. Let's get started. I'll be using dark
brown and emerald green leathers. I'll have
some more information about those below. I really love the pull-up on the dark
brown dash leather. I think it's beautiful. Right here we're
cutting out our template. I printed this out and glued it to a
piece of cardstock. It works really well if you also use a
cereal box as the backing for your templates.
I've got a scratch awl that I'm using to mark out my template pieces.
You want to be as precise as possible when you're cutting these out
because you're going to have some human error,
which is why my pattern also includes allowance for trim.
If you're not comfortable using trim allowance, you don't have to use that
part of the pattern. Make sure that when you're using your
template pieces, you flip over the ones that have a
mirrored edge. Just like this. Otherwise you're going to
end up with two perfectly identical
mirrored pieces and it doesn't work out super well
if you're trying to have a symmetrical piece.
I've made that mistake so many times. Here are all of our pieces
laid out for us. Here we're just sanding down the pockets,
the interior edge panels with a piece of, I believe it's 150 grit sandpaper,
and we're heating up our creasing iron. Each pocket is going to get a crease line.
The next step is to skive down the edges of the interior pockets to try to reduce
some bulk when you put cards into the wallet.
This isn't a super clean job with my little
Japanese skiving knife here. It's not very sharp, but
I am going to sharpen it. I also included footage
of a French skiver if you would prefer that. French skivers are a lot of fun to
get these edges nice and clean. You can also use them to thin down the
interiors themselves if you're very careful. We've lined up
our pocket pieces. We know where we're going to glue.
So now we're using an edge beveler to cut off
the sharp edges that we've sanded. That way we can apply Tocanol.
We have a nice rounded edge now. We're going to rub that Tocanol in just a
little bit, and we burnish the edges with a wood
slicker. If you have a good veg tan leather, this
should get you a great shine on these pocket panels.
It's going to help you to slide cards in and out very easily.
Here I'm marking our edges for our glue, but that also includes trim allowance.
So I'm using about six millimeters here. Three and a half
for our stitch line, and then about two for our trim allowance. If we rough up
the parts of the flesh side of the leather, that's
going to help our glue to adhere. Otherwise it's going to slide right off,
and you'll have problems later on.
We're using a water-based glue by Saiwa Leather Company.
They're the same makers of Tocanol. I really like their water
soluble glue. It dries pretty quickly, and it's non-toxic.
Press those edges down really well, whether it's with your hands,
a roller, or a bone folder, however you want to.
Otherwise you might have pockets of air in the glue,
and that's bad news. This is a roughing tool. It makes quick
work of really roughing up the pieces of leather
without you having to use a scratch awl the whole time.
We'll have a 3.85 millimeter stitch line. I'm using some actually pretty nice
pricking irons from Rocky Mountain Leather Supply.
They're the slightly European style. And for thread, we've got Reetsa Tiger
thread in Havana Cigar. This is the 0.6
millimeter. We'll be threading the thread onto
John James 004 harness needles. These are great. They'll last you a very
long time.
Because we're using a poly thread, we're going to use a thread zap to melt down
the ends. If you're using a linen or a cotton
thread, it will not melt, and you'll have to glue the thread
into the hole, kind of poking it down with a needle or an awl.
Now we're going to get to use that fun trim allowance. So we're marking a two
millimeter stitch line on the interior edges of our pocket
panels. That way we can trim it down straight,
get a beautifully clean edge once we've sanded it,
and have a stitch line. One thing you do want to watch out for here is where you
put your stitching holes. You want the holes to straddle the
two pieces of leather for the pocket. If you end up
piercing one of those junctures of leather with a
hole, it really hurts the strength of the
pockets, especially if you're taking cards in and out of it.
So really try your best to straddle those lines
with your stitches.
There is such a thing as too much glue. You don't want to over glue these pieces
because as you come back with your brush or your scraper or
whatever you're using to spread the glue, if you have too much it's not going to
dry consistently, and then you'll just have big bubbles and
goopy nastiness all over the place. So just use as much glue as necessary.
We've got our two millimeter trim allowance lines on the outside of the
wallet, and the very satisfying step of
cutting off that trim allowance. For me, this is where it really starts to feel
like a finished product. We're not there yet. We still have to do
the corners before we can start putting down our stitch lines.
This is a corner tool, and I find it super useful for getting really clean
corners on your products. It gives you a variety of corner choices and radius.
Radii? Radii. It is a super smart idea to plan out
where your stitching holes are going to go before you start actually hammering
into the leather. I often fly by the seat of my pants when
I'm laying down a stitch line. Sometimes that works out better than
others, but you can usually fix it by budging your stitch line a bit.
Remember to close up those holes with a bone folder or with a hammer, a
flat faced hammer, so that they're not gaping open after
you stitch.
There's our tiger thread. I'm using about four and a half times the length of my
stitch line. That number is not etched in stone, so
depending on the thickness of your leather, you might need more or you might
need a whole lot less. If you're looking for good tutorials on
saddle stitching with two needles, you can check out Clarenge Leather.
Tanner Clarenge is an awesome resource. Or Chartermade, which are fantastic
ways to learn how to stitch. We give it a final bevel,
and for our last burnish of the outside, we're going to take it over to the
drill press that I've converted into a burnishing machine.
We'll go over the edges one more time with some finer sandpaper,
hit it with some more tokenol, just a little bit will do,
burnish it by hand here, and rub it down with some canvas.
That should give you a really beautiful shine on your edges,
especially if you use the trim allowance. Our bone folder is going to help us to
release any extra glue on the inside and open up for cards. We're all finished!
I hope you enjoyed this free tutorial. There are several of the
free pdf patterns on my website, and I'm working on uploading videos for all of
them. You can customize this card holder a
bunch of different ways. If you have any questions about making
it, or about leathercraft in general, I'm happy to help.
Just shoot me a message, or leave me a comment, and I'll see you in the next one!
