Making A Victorian Walking Skirt (1895) - My first big historical sewing project! [CC]

Pre-modern Women's Fashion
182 followers
19 Video Views·Jan 6, 2025
Hello and welcome to my first sewing project video.
Today I'm going to show you my biggest project yet and my first project in historical sewing
which was an 1895 constructed pattern and walking skirt and this was highly inspired
by Bernadette Banner's walking skirt video using the same pattern which I'll get to.
Yeah it took me three weeks of full-time work so I'm very excited to show you how it went
and I was inspired by CocoVid, the event of all the love with people and videos
about YouTube as well which inspired me to film the process. I'd already decided to do
the project before CocoVid happened but it made me decide, you know, I'm gonna try it,
we're gonna see where it goes. The pattern comes from the 1895 book The Keystone,
a jacket and dress cover. My pattern is called the walking skirt pattern.
First of all I have to apologize for the awful quality of the first few clips I'm going to show
you. I don't have a better quality video of those steps so I'll just either show you these
clips or show you nothing at all. So I'm just gonna put them in there, bear with me
as we go on, the clips get better and better. Okay? Okay. So first I sketched the pattern
that the book instructed me to draw based on the figure, the illustration in the book
and I sketched it in a small version so I knew I understood the step. After that I laid out my
parchment paper and proceeded to, as the book says, cast the sweep and draw the big pattern
on parchment paper, pattern paper, I don't know what to call it anyway. I cast the sweep and drew
the lines. I cut out the pattern pieces without the curve at the hip because I was a little afraid,
I don't have a French curve, I don't, I was a little afraid of the curves, I didn't understand
how to draw them on the pattern based on the book. So I decided to cut out the initial pattern pieces
just without the curve and then proceeded to use the mock-up, use a mock-up to figure out what the
curve would be on me and then I transferred what I did on the mock-up, the finished mock-up which
you are seeing picked together here, I transferred that back to the pattern paper in order to cut out
the actual fabrics I was going to use. As I'm showing here on the mock-up I was tempted to
take a bit out of the side, however I decided to trust the pattern and just go with it and see
where it took me. So with the pattern done we can get to the fabrics. For my fashion fabric I had,
I had in my stash this very synthetic black and white rose printed very flinky,
I don't know what it is, it's a woven material, that much I know, and I decided to use it for
this project. It turned out to be just enough to give this project a bit of structure. I decided
to line it like Bernadette did in her video using a tarlatan, a loosely woven cotton with a bit of
stiffening glue on there to give it a bit of body and a bit of shape.
Also because my fashion fabric is very static when it rubs against itself, so I was worried
about that and wanted to keep that to a minimum. Bernadette didn't note how wide her tarlatan was
in her description, she just said she used about six yards. So I bought two rolls of tarlatan of
50 centimeters by 10 meters and I ended up using less than one roll, so that's super duper,
and I can use that in another project. So I don't have any footage of cutting the
fashion fabric for this project because it was a very difficult and frustrating process.
So I didn't end up building all of that. You can see by the cabbage that's left over of that
piece that I had just enough, so that made it extra difficult as well.
At this point I had to start labeling the pieces, the seven pieces one through seven,
in order to keep track of what was what and what was inside and outside, especially on
fashion fabric. As I started labeling, I also drew a little diagram of the skirt,
so that I knew which pieces were number one, but also so that I could make sure that every seam
had at least one piece of the seam on the straight ring, so that I would have as little stretching
as possible. So with a lot of thinking, a lot of thinking, and some some end cutting out,
I was able to get every seam to have at least one of the two pieces of fabric to be on this,
mostly on the straight ring, so hopefully that minimized any stretching once the skirt is
structured. So that's definitely a tip from me to any other beginner, is if you're starting to
get confused, label things and draw diagrams. Nobody else has to understand them, but if it
makes it more clear for you, just sketch, number, label, it helps, okay? So do that.
With a few piecings of material, we made it, and we have the pieces cut out.
After cutting all the pieces out, I had to join the tarlatan and the fashion fabric in order to
make it one, and so I spent four days basting together these big pieces of material. Let me
tell you, it took forever, but I was determined to get a pretty result, and in order to do that,
I had to fuse this slinky fabric and the skirt fabric together. I had to do that in order to
get the final skirt to hang nicely, but it was not easy. So now we can finally get to the assembly.
All of the long skirt seams were done by machine, because I simply don't have the trust in an
entirely hand-sewn by me at least garment yet, so I did the long structural seams on the machine,
and then I finished the seams inside by turning and sewing them by hand. The pockets were made
following the same pattern from Bernadette Banner that Bernadette Banner used in her video,
which are massive and amazing, and I love them, and I'm never putting a smaller pocket than that
in anything again. The main fabric from the pockets came from an old pillowcase,
two corners of an old pillowcase, and also a small piece of the fashion fabric was added
to the top of the pocket to disguise it a bit more. So the two were joined by machine,
and then I turned and finished the bit of fashion fabric on the inside by hand.
The pockets were inserted into the second side seam of the skirt by amateurish backstitch,
and I used a small piece of cotton tape to attach to the top of the pocket, as well as
the waist seam, in order, in hopes of supporting the pocket, as Bernadette Banner mentioned,
this was an issue once the skirt was finished, that once the something was in the pocket,
so I decided to add this in hopes of preventing that. I also added two small loops into the waistband
in order to hang up the skirt, so I won't have to fold it to put it away, I can just hang it on
a hanger and it won't get any breakage that way. The waistband was made from the fashion fabric
and metallicum as well. I made the piece two inches wide so that it would fold over into a
one inch waistband, because I modeled the half an inch final waistband that Bernadette Banner
used in her skirt, but I thought it looked too narrow on me, so I decided to double it
to a one inch waistband. The waistband was attached by machine, and then folded over
and fell down by hand. For the closures, I added two parts A of a snap button and four parts B
on the other side, so that I would have three options, or slightly different options, for how
wide I wanted the skirt waist to be underneath the waistband. This way, I would have a slightly
adjustable waistband. After hanging the skirt on my no longer adjustable mannequin for a few days,
I was ready to hem, and for that, I flipped the skirt inside out and folded and rolled up the hem
until it was even all around, at a hundred centimeters from the waistband, and then I fell
back down by hand in order to finish the hem. Now, I'm not very worried about this hem. It's not a very
strong hem, but this has turned out to be kind of a formal garment. I don't think I'll be wearing this
extremely often, and so I'm not worried about, I'm not really that worried about having a not so
strong hem. If this was a very everyday kind of piece, I would probably have added a piece of tape around the hem,
like Bernadette Banner did, in order to protect the fashion fabric. After hemming, we can now take the
final, final step of removing all of that part of the facing. I didn't know how much facing I had
done, but when I had taken it all out, I had two full spools of red, which I will keep, obviously, but yeah, I wasn't very surprised it was this much.
After pulling out the facing print, she's done! Here we are! I am so proud of this really finished garment, and it makes me very happy.
It was a long process, like I said, three weeks full-time. I'm on vacation still, though it's
anyway all. I have really, it was three weeks full-time work, and I'm very happy with the result.
I wanted more hand-sewing practice, I got more hand-sewing practice, but yes, I'm very pleased
with the result. It stitches very nicely. I love, love, love the fabric. I'm never putting a smaller fabric in anything, ever.
Just watch me. All right! With that, she's done! I hope you enjoyed watching my journey with this project.
I am very happy with how she came out, and what I learned along the way as well, and all the practice
I got with hand-sewing, and yeah, I will leave you with some footage of me
twirling around, and enjoying myself in the skirt, and I hope to see you next time! Bye!
you
