I Built a Mountain Bike For Exploring Cities

RockShades
98 followers
#sport #travel #running #marathon #cycling #bicycle #training #race #triathlon #swim #bike #run #adventure #inspire
I just finished building this tactical commuter bike.
It's built on a hardtail mountain bike frame with a rigid fork.
There's no suspension on this thing.
It's got street tires that are actually really fat, so we can jump off of stuff.
That's what makes it tactical.
And it's got crazy handlebars and a whole bunch of experimental stuff that I've never
installed on a build.
So today I'm going to show you how I built this tactical commuter bike.
We're going to take it for a ride, and we're going to make sure it does all the things
that I designed it to do, because next week I'm using it.
So let's rewind to yesterday morning when this thing was in pieces on my workbench.
The build started with my Salsa Timberjack, a fully rigid single speed mountain bike we
built in another video.
Its stiff alloy frame, rigid fork, and plentiful mounting points made it the perfect platform
to start with.
I began by replacing its big fat mountain bike tires with Surly Extra Terrestrials,
which are fast rolling and have just enough tread for some light gravel if need be.
I used TPU inner tubes instead of sealant to make the bike more neglect tolerant.
The volume of these tires should also make it great for jumping off of stuff.
Next I chose an old SRAM GX11 speed as our drivetrain, as it's reliable and has more
than enough range for urban riding.
It's paired with 145mm 5dev cranks, which are small, but so are my legs.
Then we got to the really interesting part, the handlebars, which are Surly Corner Bars.
To understand what these are for, let's have a look at my gravel bike.
Now on my tactical commuter bike, I want to mainly hold the bars up here, and I want to
access my brake levers and shifters on the top, but I still want hoods.
So how do I get both those Surly Corner Bars?
That's why I'm using them, is because they have hoods kind of built in, and then I can
hold the top to do tactical things, and then I still have the drops.
Now the downside is I'm not going to be able to access the brakes while I'm in the drops,
but I will be able to access them on the hoods and on the bars.
That allowed me to use standard brake levers and shifters on the top of the bars, where
I'll be spending most of my time.
And after experimenting a bit with bar tape, grips, and lever positions, I was able to
engage the brakes from both the bars and the hoods.
You're supposed to put the levers on the drops of these bars, but this is an experiment.
We'll see how it actually works out.
Now for functionality.
I wanted a front rack and fender, but getting them both to fit securely proved challenging.
And so for now, it's only going to have a front rack for carrying cargo.
Like a gift capsule.
I shouldn't have cheaped out on the fenders, but I guess if it rains I'm getting splashed.
Then I moved on to the frame bag, which will carry all my supplies and camera gear.
It's specifically designed for this exact frame, the Salsa Timber Jack, and so it fills
in the space perfectly.
And while it covers the bottle cage mount, I was able to put one on the fork to make
up for it.
And on the downtube, I installed a Crankbrothers tool and CO2 mount for field repairs.
And with that, our tactical commuter bike was more or less complete.
A fast rolling, comfortable, functional, and robust urban mountain bike that resembles
nothing else I own.
It's going to several cities already on my calendar, but today, we need to shake it
down and make sure it does everything I designed it to.
So first we need to make sure this bike is fast, because we need to get from place to
place.
It doesn't have to be road bike fast, racer fast, it has to be nimble and be able to make
its way around town.
That's an easy test.
It's made for going in between buildings, back alleys, navigating through town.
Oh, here we go.
Let's do something kind of tactical here.
Nice, let's go off of this one.
Oh yeah.
This thing is tactical.
Ah, they saw me in the Papa John's.
So clearly it's fast.
That's no surprise.
Any bike can be fast, especially if it's got fast rolling tires.
But these tires are really fat, and so they can be tactical.
We can jump off of stuff, we can hit curbs, we can even air them down if we need to.
And that brings me to the next part.
Is it functional?
I mean, we don't really have to go anywhere to see that.
This big frame bag is what makes it functional.
This is not just a random frame bag.
It's made by Salsa to fit this exact frame.
That's why I got it, so that I can have the most storage possible.
And because in a city I can typically get some water or find some lunch, I don't need
the bottle cage as much.
There's actually a bottle cage on the fork that I can still access.
And then in here, I can put all the things that I'm going to need while I'm out in the
city.
For example, my chest cam, my vlog cam.
I can jam sweatshirts in there, chargers, tools, anything I need to shoot my Unbikeable
series.
If you saw the last two episodes, I did one in Asheville, and I did one in Dallas.
Now one thing we do during Unbikeable is we hide a gift capsule, and there's a lot of
stuff in here, so I have to be able to carry that.
That's what's in this dry bag up here.
I want to show you this rack and how I have it set up.
So yes, in here is a camera, a selfie stick, batteries, accessories, all sorts of things
that I'm just going to leave hidden in a city for people to find after the video's done.
And it's in a dry bag because it's going to sit outside for a long time, and it's strapped
down to the rack.
Now actually, the straps that are securing it to the rack came with the tires.
That's how they're packaged.
They package with these straps, and they double as gear straps, which is pretty cool.
It's something that only Surly would include.
I'm going to unstrap this so you can see the rack.
There is our dry bag.
Very basic, just flat rack over here.
I have a bunch of bungees on it so that I always have a way to strap something down.
I'll keep these with me.
So if I want to bring something back to the city, if I want to strap my sweatshirt down
or something like that, I have numerous places on this bike that I can store things.
But there's also some storage that just always stays on the bike, and it's over here at the
down tube.
Now down here, you can see we have a few things.
These tires have TPU tubes in them, as I mentioned earlier.
That's for neglect tolerance.
I want to be able to leave this bike anywhere without worrying about sealant drying up.
And we have a spare TPU tube strapped over here, this little Crank Brothers gear strap,
and it's got two other things on it.
First of all, a pump.
That's going to be good to have.
Yeah, after about three hours, I can inflate one of these tires with this.
But also, there is a tool over here.
We have a multi-tool, chain tool, spare links, an inflator, everything we need.
And this is just going to be left on the bike.
Up at the front, as I also mentioned, we've got a water bottle.
What more is there to say about it?
I can carry water with me.
Now because I'm going to be exploring cities I've never been to before, I have my phone
mount over here so I can always have my navigation running.
And it just clips in with this phone case.
It kind of lines up magnetically and then snaps into place.
If I want to grab it, I just reach around the phone and push in these little buttons
and it comes off.
I like being able to mount it like this and it still works with wireless charging.
And lastly, let's talk about the bike.
I chose to build this on a Salsa Timber Jack because it's a mountain bike and it's flexible.
I can configure it a lot of ways.
Now, a mountain bike frame is going to have the right geometry for jumping off of things.
It's going to be rugged.
We don't have to worry about it breaking.
And I've paired it with a rigid fork because we're going to be in the street all day.
When I was a kid and I rode BMX in the street, I used a rigid fork.
The whole bike was rigid.
You can jump off of stuff with something that's rigid.
But also, you can put a dropper post on a mountain bike and that's something we need
if we're going to be jumping off of stuff.
Even if I stop at a stoplight, I can just drop this dropper post and put my feet on
the ground.
If I'm going to jump off of something, I can drop it.
And then if I'm going to sprint away, I can put the seat back up to the pedaling position
and crank at will.
So it's fast.
It's functional.
But is it tactical?
Well, I did jump off of something this morning.
Let's take it over to the skate park.
Let me get a feel for this thing and we'll assess.
There's been a storm and a lot of stuff is closed.
I don't want to like ride the apocalypse and make light of it.
And honestly, I can see some problems here.
I can see some things I want to change.
These surly corner bars feel really weird when I try to bunny hop and that's important.
I don't know.
I feel like I know what the problem is and I think I have a solution.
So let's go back to the shop, change out these bars.
I'll explain what I'm thinking and then we'll give it another test.
So why am I not crazy about the corner bars?
Actually, I really like them.
I'm probably going to put them on a cargo bike at some point.
The hoods feel OK and the drops feel OK.
But when I'm doing something really tactical, I want to hold on to the top.
They kind of fan out at the bottom here and at the top, it's actually kind of narrow.
My arms are kind of bowed out in a weird way.
That's the opposite of a mountain bike.
Mountain bike bars are swept back, so you're actually holding a little bit like this.
So if I was smart, I would just put mountain bike handlebars on this bike because they're
fine for riding around the street and they would feel great.
Or we could take the drop bars off my gravel bike.
They're really wide and they don't go like this.
The only problem is I wouldn't be able to have hoods without having my brake levers
and shifters right here.
And as I said, I want them up here.
So what do we do?
No, that's not going to make it.
I got myself into a pickle and we are deep in that pickle jar.
I didn't realize that drop bars have a different diameter on the bar than do other bars.
And I didn't know that because I've never tried to put normal levers up top.
Who would? You'd have to be doing something stupid like I am right now.
Oh, I don't want to replace all these hoses.
God, we're going to put the corner bars back on and we're going to get used to them
because I am leaving tonight.
All right, let's go to the pump track and see if I can get used to this thing.
OK, notice something when I'm holding here, I tend to grab like this
and my thumb is rubbing right there.
So I have to move these a little bit more inboard to make up for it.
On the shifter side, it kind of just clears, but I'm going to move it
a little bit inboard also.
Yeah, I think we can make this work.
I'm considering doing this.
I'm thinking it's not a good idea.
It's just too bumpy.
And now that I'm here, it doesn't look like I'd have much of an exit plan
after that whale tail anyway.
Something tells me I should hold on to the bars on this one.
I think we got this.
Oh, OK, this is what we do.
Oh, wow.
This iteration of the tactical commuter bike is ready to go as far as I'm concerned.
So where do we go from here?
Well, I'm going to take this bike to America's most hated city,
maybe the most hated city in the world.
And I'm going to explore.
I'm going to see if the food's any good.
Hide a little gift capsule.
Jump off of stuff.
It's going to be fun.
So I hope you had fun today.
I hope you learned something.
You probably didn't learn anything, in which case I hope you were at least entertained.
Thanks for riding with me today and I'll see you next time.
