I BUILT A TWO WHEEL DRIVE MOUNTAIN BIKE WITH 3 WHEELS WILD WELDS EP1

sport and travel
205 followers
AI Generated·May contain errors
Welcome to episode one of Wild Welds. This is a new series that's going to live on this channel
where we modify mountain bikes into weird designs. Today, we're going to be putting a third wheel
on the back here. This looks like one of them G-Wagon six-wheeler things, but a mountain bike
version. It's going to be difficult. I've never welded before, but Louis got me that for Christmas.
It's down there. It's fired up. Let's get this show on the road.
My plan is we're going to cut the back end off of this bike here. Then we're going to add on
our bits of steel that we have here into the tubing. Then that's going to connect off the
back of this. Firstly, what we want to do is cut this back end off. Same on the other side.
We're then left with that. Is that going to fit inside? No. Cool. Louis, that's the best idea.
Look, that is going to weld like you've never seen weld before. Let's try and connect my first
bit of weird weld up. Here we go. It's blown up. Something happened. I don't know how good it is.
That is sick, Louis. Look, that is actually proper now. See? I'm proper stacking it up.
That, my friends, is how you weld. Sick, look. I've got a meter ruler.
Right, now we've got to do that to the other side, then. Oh, wow. It's really stiff. Obviously,
it's not going to be perfect, perfect, but I want the wheel about there.
This is cool. It's actually working. We'll use two bits of wood,
screw it, and it will lock the wheel completely in position. I'm going to mark this. That's where
I want it to be. That's going to go there. Let's weld this first, then we'll cut that
and just bend it over slightly here. It's definitely on there. How well it's on there,
I don't know. Now we've got to do the other side. Louis is doing a bit again now, trying to fix some
of my mistakes. We're getting to the next stages now. That's all welded up. I realized we put that
on the wrong way around. Look, so now it's got an upside down dropper. It's going to work anyway,
and it's funny. We're going to leave the wheel the wrong way around in a symbolization
of how moronic I am. After a bit of looking, we're going to cut that at a bit of an angle,
and that's going to sit like that in the back, and then perfectly on there like that.
Strapping. Oh, it's working much better now. You changed the temperature, didn't you? Let's try
and connect it up here then. Oh, yes, look. I'm so good at welding. This is the best. Mate,
I'm pumped on that. We'll put on the other side now, then. We're now going to just make another
version of that put there. There we go. The bike is done for now. We're going to go to its first
test. Let's go and see if this beast is going to work. Ready for this? My first wild weld looks
sick, but will it survive its first ride down here? Let's send. Dropping.
This is sick. No way. Yes, first test complete. The beast works. One issue,
obviously, if the middle wheel comes off the ground over bumps, you can't pedal,
which feels weird, but later on in the video, I want to flip this wheel around and try and
connect another chain so it's got two-wheel drive. For now, let's see if it can go and handle some
mountain bike trails. We've now come into the local woods to see how well this thing's going
to work on some mountain bike style stuff. Before we do that, I'm going to get rid of
these dangerous, horrible cow horn things, and we're going to put some pill grips on just to be
a little bit safer. Going to run blue pill grips. This is the mixed blue and black Super Steez
straight on. Yes, get them done up. Pill grips fitted to the three-wheel bike. Definitely feel
a bit safer without them cow horn things. Let's go over there and drop in on its first descent.
Here we go then. I'm not going to go fast because I don't want the back end to snap off.
Yes. Stomp. That's so cool. This is actually the run-up for that big takeoff there, which
is the goal to hit at the end of our little session here in the woods. Let's see
what else we can go off now. Let's drop in there then and go off of this tree drop.
All right, let's get it. Oh, yes. Here we go. We got the first bit of air with the three-wheeler,
and it worked so well, way better than I thought. I was expecting to get sent over the front, but
it seems to be perfect. What we're going to do now is hit a trail down to a big tabletop.
If that works, it's then time to come back and try this big step up. Let's get over there.
Here we go. First trail. Let's try and get the speed going. We're in. Nice and steady. Yes.
Oh, yes. We're in. A little steep section. That is nice. Into the jump section. Oh, no.
Yes. A bit of air. It's so hard to get speed on. That's the downfall.
We need to make it two-wheel drive. Basically, once you're in an uneven surface,
the back wheel then comes off the ground. Look. I'm almost crashing pedaling because
I've got grip, and then it just lifts up, and I almost crash. Let me try and get a good run-up.
We'll get the fish eye on. World's first three-wheeler bike air on this table.
Yes, it worked. The world's still staying strong considering this is our first build.
I'm actually over the moon. It's time now to hit this big step up. It's what we've all been
waiting for. Is it going to be an aerial warrior or a lead weight of doom? Let's find out.
Here we go. Full speed. I'm not fast enough for sure. It's chill though. That's ridiculous.
I was so scared for a second and then realized I was going to case, but then I've got three
wheels. It landed on the back wheel and then transferred the weight onto the rear one.
Let me get such a big run-up. It's so slow out here today. We're going to go to the sky.
Yes, huge air time on this thing. That's so crazy. That was fun in the slow-mo. You see the
back wheel land first and it connects up to the middle wheel. I think if I didn't have that,
I'd have looped out if I was in that position. So cool. We've aired it, trailed it, dropped it.
We got a stair set of doom it. We just come to Southend because I've spotted an insane
doomer over there. Look at that. To be honest, I'm so surprised we're even here now about to
do a doomer on our first weird weld. It's so sick. We're in Southend. It's actually
firings there. It's lovely. It looks like we're in California. Look, there's even palm trees here.
Let's get up the top, drop in, got the hover air as well for a bit of sidetrack action.
Let's send. Here we go then. Let's see if the three-wheeler is going to work. Dropping.
Oh, it's scary. That is so sketch. Working though. Yes, please.
The guy exercising. He's going to have a show. Yes, it survived. Epic.
Yes, it survived. That's so cool. Another feature ticked off with the three-wheel bike.
The only bit that's weird because I was breaking down there hard. When the middle wheel comes off,
you speed up a bit into the next section. It was scary to control the speed. What we want to do
now is head back home. We're going to switch the wheel over and see if we can make it two-wheel
drive on the back to continue the excitement. We've come back to HQ because we're going to try
this two-wheel drive. I think it's going to be pretty chill. I'm going to take the wheel off,
flip it the way around it was supposed to be anyway, but we welded it all together wrong.
Then it should just work that we can get a chain on there to a different gear on there,
which should, in theory, all connect up. It's still got a cassette, so it'll roll freely as
well. We've got a chain on. I've fitted two together to make it extra long. Connect the
chain up with double-length chain. Do this up. Now, we've got to try and pop the chain on.
Oh, yes. It's actually working, Louis. This is insane. Let's lift this up.
Two-wheel drive. This looks like it's actually going to work. Let's go to a little open spot
over there and just see if this idea is working or not. We quickly popped to the skate park to give
the two-wheel drive system a go. While ramming that chain on, we've seen that the actual cassette,
well, I think the actual hub inside has broken, but that shouldn't stop the fun. Let's see if
it's going to work. Here we go. First pedal. Yes. Two-wheel drive. Let's just go over there
and see if it actually works then. Yes. No way. A two-wheel drive system. Pedaling.
Middle wheel comes off. Back wheel engages. That is unreal. I wonder if the spine will work.
I then tried to hit the spine, snapped the rear axle, and then we went home again, fixed it all
up, and now we're left with the finished product, the two-wheel drive bike. We also added a chain
tensioner because obviously, we messed up and put the back end on upside down as we saw in the start
of the video, morons, but that allowed us to weld this on. We've got a tensioned chain. It works
perfectly. We've come to Twisted Oaks in the pouring rain to see what it's capable of. We're
going to start off on this skinny here just to see how well it's going to work on it. Here we go
then, into the skinny with my super long bike. Easy. Two-wheel drive system works perfectly.
That's unreal. I can't believe we've made such a good machine. Next up, we're going to hit
this trail here, which starts with the mini cannon. There's a few tight berms and a finale
drop at the bottom. With the new power delivery coming from both wheels, I should be able to get
enough speed to do it. Let's give it a go. Here we go. Into pinball. Oh, I'm in a low gear though.
Yes. Oh, it almost pushed me off the top of the berm, but we're in. Oh, rigid into a scary drop
here. Oh, yes. No way. Surviving. It's so weird when you hit a turn and then the back wheel
touches the floor because it's a bit bent now. Look. It starts to fire you in weird positions.
It's such a good feeling though. We're over now at Big Dipper. This is a red line.
We got two good tables in a row to start off and then it winds down the hill with
a load of different jumps. If I can clear these with the three-wheeler wild weld,
then I'll continue and maybe make it all the way down this sick jump line.
Here we go then. Let's try and clear these tables. Oh, almost went over the bars. Oh,
no. What was that? Oh, no, Louis. Oh, it's not as... Oh, no. I thought it wasn't bad and then
it was bad. The wheel would just come out, but actually the whole weld has snapped.
That's so... Almost went over the bars. Let's get an action replay on that almost over the bars.
Almost went over the bars. Oh, that was sick. Oh, no.
Oh, my God. That had been such a horrible over the bars. Could you imagine that?
But I'm actually stoked. We've done our first wild weld. It lasted that long. Obviously,
we made some mistakes. We were rushing. Well, I was rushing with excitement
and put the back end on upside down. But I mean, that's pretty sick that our first weld and just
buying the steel from B&Q, like a department store, made it work. I mean, this looks bent here,
isn't it? I think that whole section there. Oh, yeah, that's really bent. I guess this started
to give way and then that's like... Yeah, because that got shorter then it's pulled it out. That's
actually most likely what it was. But oh, yeah, look, it's bent here as well. So it's actually
the metal was giving way. If we would have probably had like a support here. So there's a
lot of things to learn from it, but also the fact that this worked first time for this long is super
sick. I'm not going to throw this bike away either because this is our first wild weld. I'm
going to fix it and just have it as like a memory of how good it is or our first bike design.
So now it's your turn. What other crazy bike should we weld? What other designs do you have
in your mind that you think could work? Get them written in the comments. You can also send me some
sketches on Instagram if you want. This is epic. I hope you enjoyed this first episode.
See you in the next one.
