Rich Payne heads back to Finale Ligure to put modern mountain bike technology to the ultimate test. Comparing his 10-year-old EWS race bike frame with a modern Propain Tyee, Rich races the infamous Mens DH stage to see if new componentry, modern geometry, and bigger wheels can make up a decade of aging. Can modern bike tech replace peak fitness and hard training?
Thanks to Atlas Ride Co for hosting! For a discount on your booking, use code 'GMBN10' 👉 https://gmbn.eu/AtlasRideCo
⏱ Timestamps ⏱ 00:00 - Introduction & The Big Question 00:48 - 10 Years Ago: Peak Pro Racing 01:38 - The Old Tech 02:08 - Old Geometry & Build Specs 05:05 - Bike check: Propain Tyee 06:08 - Modern Enduro Geometry 06:32 - Modern Drivetrain & Components 07:05 - The Test Track: Mens DH in Finale Ligure 07:46 - Track Sighting Lap 11:04 - How tech has changed 13:49 - Practice Run 15:18 - The Timed Race Run 18:04 - The Results & Final Verdict
Does modern mountain bike tech genuinely make you a faster rider, or was old-school tech just as capable in the right hands? Let us know your thoughts in the comments below! 👇
The Global Mountain Bike Network (GMBN) is the world’s largest and fastest-growing online mountain bike channel and community – and your destination for the best mountain bike content in the world.
GMBN is dedicated to inspiring and unlocking your riding potential. Our videos cater to fans of every mountain bike discipline: from mile-munching cross-country (XC) riders, through adrenaline-fuelled dirt jumpers, gravity-hungry downhillers or aspiring enduro racers, and beyond.
Our ex-pro presenting team are on hand to entertain and inspire you while also providing a uniquely qualified insight into the world of mountain biking. Every week we deliver original daily videos that include:
Adventurous and entertaining features Mountain bike skills coaching Technical advice and guidance Mechanical know-how to keep you rolling A place for the riding community with our weekly Dirt Shed Show
Can technology really make you faster?
Have bikes changed that much in recent years?
It's something from 10 years ago.
It's so drastically out of date. Well, thank you to Atlas
Ryko. I find myself here in Finale Ligure.
We're going to answer those very questions. We're going
to look at what old tech was and compare it to current day bikes.
We're going to go further
than that. I'm going to put it through its paces.
I'm going to race a stage I did 10 years ago on
I'm going to go on my old bike, I'm going to redo it.
I'm going to look at the differences.
Yikes.
Let me set the scene.
10 years ago, I
was peak pro racing rich,
traveling the world,
racing the Enduro World Series.
I poured a lot of blood, sweat, and tears into that. I trained
relentlessly on and off the bike, getting down the gym,
putting in the laps to make myself as
fast as possible.
As times moved on and I've mellowed, honest, I want to know if modern
tech can replace all that hard work I put in all those years ago,
making me just as fast now as I
over a decade ago,
which is why this little slice of mountain bike heaven is perfect for
this video. I raced here over 10 years ago.
I have the data, I've got the numbers,
so we can compare whether the evolution
of the mountain bike was meteoric or
slightly more glacial in pace.
For that, we need to head to the pain cave.
Welcome to said cave.
Now, the bike I was on all those years ago is actually
just up behind you on the garage wall there.
It was called the Chemical Adrenal. Nice name,
I know, but surely, surely it can't
be that different to what I'm on now.
The bike had 150 mil travel at the rear and 160 mil fork at the front.
It was a full 650B or 27.5
inch wheel affair as well.
No mixed wheels, no 29s, no same wheel size at front and rear.
When it comes to numbers, this is where I
think it gets a little bit interesting.
This was a size large. Bear in mind, I'm six foot tall.
The reach on it was 447, very short.
Had a chainstay of 439, a seat tube angle of 74 degrees,
and the head angle was 67,
but I used an angle set to take it to 65.5.
Wheelbase, 1191 millimeters.
Numbers that might make you cringe nowadays,
but back then it had some pretty up-to-date
technology like VPP, the virtual pivot point,
derived from Santa Cruz's. It also had a whole
host of reviews from reputable companies like Enduromag, who said this,
For a genuine all-rounder of a bike capable of long days in the saddle,
XC rides, or even thrashing through full-on enduro stages,
this bike should be high on your list.
Even our very own Steve Jones,
who worked at Dirt Mag at the time, said this.
Hello, Steve Jones here.
Out of the gate, the Adrenal has good pace in its bones.
The front and rear is well balanced,
and the suspension offers enough support
to generate drive from the ground.
Tidy.
High praise indeed, then,
for what was essentially a Chinese catalog bike.
Not necessarily a bad thing, but it does beg the question,
what was the competition up to?
I digress though. Other tech I was running
at the time was a full Shimano groupset,
11 speed. We're now, of course, up to 12,
so the addition of an extra gear. That hadn't changed
a massive amount as well,
except for the introduction of Di2 as well, of course,
but that wasn't really a thing at the time. It never really existed,
but now with wider ratio cassettes,
it does make climbing a lot easier. An area that has
moved on a lot though is wheels and tires.
We'll get to that in a little bit.
Back then, I rode for a wheel company called American Classic
on a mixture of carbon and
aluminum rims. The weights of those were roughly 1.65 kilos
for a set of wheels, which is nothing
to be sniffed at by any means,
but it's the dimensions that were interesting. 32 mil outer
and 26 mil inner, and that's pretty narrow.
Then when it comes to tires,
things were very different as well.
We were searching for a compromise of weight,
and strength. We were looking at thinner casings,
but still with super tacky compounds. The tech
at the time didn't really keep up with the demand
of what the enduro racer needed or the rider needed
and what it was pushing its limits to.
Punctures were still very much rife. I did run an insert
like we do nowadays to try
and negate some of those punctures and wheel damaging.
It was nothing more than just a flat bit of foam.
By the end of the season,
it had so many cuts and slices in it,
it looked like it had been in a fight with a tiger.
Do you know the one piece of tech on this bike that you will not see
anywhere on any new enduro bikes? It's a front mech mount.
Whoa. That's old school. What does
a bike in the same category nowadays look like?
Well, this is what I ride. It's a propane tie.
Travel has increased, 160 mil at the rear, 170 mil at the front.
We're also running on a full 29er
setup here, no 27.5s in sight.
Do you know what else is not in sight? No front mech mount. That
is long gone. This frame is a full carbon construction with tube
and tube technology,
as I call it, which means internal routing,
not as much of that going on on this one, is far easier.
There's a lot more attention to detail nowadays
as well with things like how the bearings are housed
or covered, keeping things nice and quiet and smooth.
You can see we've got a lot more rubber
on the bottom of the down tube here for rock strikes.
We've also got this big rubber padding
all around the chainstay there as well
to keep chain slap a lot quieter and doesn't damage the
edge of the frame also.
Geometry is completely different.
Head angle is nearly two degrees slacker at 63.9.
The reach is 473 mil.
That's nearly two centimeters longer.
Steeper seat tube angle at 77 degrees
puts you in a much better climbing position.
And a 1,266 mil wheelbase puts this bike
over 7.5 centimeter longer.
That's mental.
There's more though. Geometry hasn't just changed.
Components have moved on as well.
Longer dropper posts, electronic for a start.
No wires here. Same with the gearing,
much more wider ratio cassettes.
Electronically actuated means they're just simpler to install,
easy to adjust even, and you've got plenty of range of gears as well.
Everything is just engineered and progressed from what it used to be.
Enough chit-chat about bikes.
I think it's time we went and put a first run in.
With all the tech changes and upgrades then,
I find myself here perched above one of the most
famous tracks in Europe, Men's DH,
used as the final stage for almost every Enduro World Series
event held here.
It's where I set my fastest time 10 years ago of 2 minutes 58.
The 1.5-kilometer
track has a relentless pedaling section at the top
and then once you've survived that and your
And your heart rate is maxing.
Well, then the unforgiving rocks kick in where absolute poise,
precision, control, and focus is needed.
Can I get anywhere near that time from 10 years ago?
Well,
let's find out,
but first, a
sighting lap.
Flipping heck then. It's not just bikes
and me that has evolved and changed. The track most
definitely has as well. It's just as rocky and loose as I remember.
The problem we've got is,
back then there was a lot more straight lines.
Where I'm talking to you directly to the camera
now, we straight lined it down here.
You can see that's cordoned off. There's some big logs across
and we now snake our way down.
Now, whether that's a safety thing, a preservation thing,
open to more people thing, but we definitely
just hammered it off of these drops.
Which you can no longer do,
so that is going to seriously impact the time, but
we've got a few more sections with some definite line choice,
so I'll see you down there. That's
a shame. Ideally, it'd be good
to set up high and then cut across,
but what makes this track
so tough as well then is this.
Hang on. Have a look at that.
That's just gravel of all different
sizes where it just breaks up and goes really loose.
You've got gravel over rock.
You're just skidding around the place.
It makes it really hard to get your tire choice pressure
combo correctly as well as obviously your suspension.
You never want to push the front
end too hard because it'll just wash out
on conditions like this. This track's tricky.
My word, it is every bit as scary
and rough as I remember.
I'm definitely going to need my big boy
pants to put on to get anywhere near that time.
The track has definitely changed in a few areas.
So I think it's going to be...
It's going to be hard work, but fortunately,
we've got Atlas Ride Co. making life a little
easier shuttling us back up rather than having to pedal,
so up for another. Before I drop in
for another run then, 10 years on,
and it's not just bikes and tech that have changed, I have too.
The last time I raced here, this 10 years ago,
I averaged 175 beats per minute on this track.
That was after a 50-kilometer race day with multiple stages
and climbing 1,700 meters.
I was fit back then. Now, don't get me wrong,
I'm still pretty fit if I do say so myself,
but I think that top-end power,
that explosive power might be where I'm lacking, which is so
important in mountain biking a lot of the time.
There's another aspect to it and it's that killer
racer instinct. I was gunning it back then, obviously.
I was full EWS race mode.
Getting back to that place
is somewhere I don't have to visit very often.
Speaking of revisiting, earlier
on I mentioned about the advancements in
tires, suspension, and wheel tech, all coming on such a long way.
Let's quickly jump into that a
bit more. With suspension, you're going to notice
a coil shock at the back. That was almost unheard
of back in the day, reserved only for the elite or the very brave.
A lot of us just ran air shocks,
and it's because they were heavy
and we were in search of saving weight all the time.
The tunability on them was limited at best.
Nowadays, shocks like this, well, they've got
a lockout for a start, high and low speed compression,
high and low speed rebound. Plus,
you can obviously change the weight of the spring,
giving you a much better feeling bike a lot of the
time, especially when things like this propane tire
are tuned for that. Then moving forward,
these big Fox 38s as well, 38 mil stanchions,
18% to 31% stiffer than the 35 mil stanchions
I don't know what the tension is on the Rockshox.
back in the day, thus giving a firmer,
a stiffer ride and giving you more direct feedback throughout
the bike.
With improvements in suspension, saw increases in speed,
back in the day, I was riddled with
punctures whilst I was racing.
Sadly, they were just not up to the job and they were proper
enduro-specific tires.
Nowadays, we've got incredibly clever casing and sidewall protection
and protection on the top and even the compounds that we use.
For example, the Vittorias that we
use here on the channel.
I've got a Martello on the rear and a Maza on the front in the enduro
Race compound or fo
rmula if you like t
heya
re both
2.6, which is much bigger than I was using back
Yes.
in the day as well. They're woven with
graphene into the compound and in the casing.
They've got extra protection on the top and
on the sides so they don't pinch puncture or tear as easily.
These are all things that
you just didn't have as much back in the day or if you did,
the tires cost an absolute
fortune and you couldn't afford to replace them
as much as you did. We're also running
clever inserts that weigh virtually nothing
like Vittoria's airliner. There's an airliner
Liner in the rear but I don't run one in the front.
You combine this with now being able
to run slightly lower pressures with the insert,
for example, you're getting much better traction
and you're limiting potential damage to wheels.
Let's talk wheels. What we see here is a full carbon wheel set,
something that would have cost just way too much
a decade ago and was, frankly,
too fragile. I tried it, broke a lot of them,
and then switched to aluminum.
These are Light Bicycles Recon Pro.
Now, some interesting facts here. These are 1.4 kilograms
or so for the pair, the pair people, but they're strong.
32 mil on the inside, which gives that
lovely big profile to the tire, especially on the big mountain stuff.
That's interesting because
actually on the wheels 10 years ago, they were 32 mil on the outside.
Combine that with the nice
thick sidewalls to the rim,
you know they're strong when it comes to taking rock strikes or strikes
Strikes on anything, especially combined with the
the tire and insert combo.
Funny enough, there's a five-year warranty on them as well. That bodes
well for what's about to come up, the second run.
This is it then into the second run. This is
And this is sort of the...
the half-paced sighting lap, if you like. Thanks, buddy.
I'm a little nervous, I'm not going to lie.
That top section is brutal on the pedaling
and this is an unrelenting track the best of times.
It takes it out of your arms. It takes it out of your legs.
It takes it out of your lungs.
If I remember in a minute, there's a good inside line.
Let's get through here. So tight. Inside
here, look. Off that drop, let her run a bit.
You got to be so gentle
on the brakes on this track
as well. You get too heavy-handed, that gravel will eat you up.
This is where it starts to get
wild in a minute. Dropping in.
Wish me luck, people. Oh my God.
It's so tough, this track.
Yes, made the right hander. This is it, final bit.
There's the finish line. Oh God, I'm done.
Holy smokes. I must get my breath back and let's go do a race run.
This is it then, the moment of truth.
10 years of tech and progression can't help me now. It's
just me, the bike, and the track.
The time to beat is 2 minutes 58. Do we think we can get anywhere
near it?
Let me know in the comments
and I'll see you in a moment.
This is it then.
Okay, let's go.
Up out the saddle and on the gas.
Oh,
heart
rate
peaking.
So, so
tough
this
track.
So physical.
Remember the right hander, Rich.
Oh, where you going?
Yes, Rich.
Home
stretch,
people.
That was absolutely savage.
Every bit is hard, physically, mentally, on the bike,
line choice, everything.
Everything I remember from the race
is like horrible flashbacks.
Okay, let me get my breath back
and we'll look at the time.
Well, my goodness, what a day that has been.
It's an absolutely relentless track, Men's DH,
but I have enjoyed getting some laps on it.
I think we should just dive straight in and reveal
the time. Now, the time to beat was a 2.58 from 2016.
10 years on, I did it in 3.07.
I'm nine seconds slower.
I'm less than a second slower per year, essentially,
which given that the track has changed quite drastically,
a lot of the straight lines are
gone or not really there anymore.
There's a lot of extra turns added. I do genuinely think that
modern technology does make up
or does make you faster than what it does. In my prime,
I'm still just as quick now thanks to the modern tech.
That's not to say that the tech then was
rubbish or outdated. It was really, really good,
real cutting edge stuff for what we needed
at the time. It's just that mountain bikes evolve and move on.
We find those sweet spots of just
what we can push and what we can do.
We're ever challenging that as we see
32s come to the fold at the moment.
It's not just the big changes in things like
Suspension, and geometry, and carbon frames.
29-inch wheels. We see it in smaller items.
I didn't really talk about it much earlier on in
the video, but even simple things like a bottle cage.
Back in the day, I used to buy these cheap
metal bottle cages. I'd have to crush them,
squeeze them together a bit so it didn't
jump the bottle out. Now,
we've got these clever top ones where it wraps around and make
things nice and secure so you don't lose a bottle mid-ride
or mid-race. It's all these
kinds of basic little things that weren't thought about then that have
added into the thought process of how we design bikes now.
Let me throw a few more stats at you.
My average heart rate was 163 with a peak of 174,
so basically the same as what it was 10 years ago.
Peak power was a little bit lower. That's to be expected.
That doesn't surprise me too much,
but it was a pleasant surprise knowing that my fitness
and my endurance was still there.
Anyway, I'd love to know what you think
in the comments down below. Are you still kind of an old tech
enthusiast or are you all about this new stuff
and do you try the most cutting edge out there?
It's been a fun experiment. I think
with a couple more runs, I dare say I'd get even
closer to that time, but let me know
in the comments down below. It's been an absolute
pleasure making this video for you.
So until next time, people, I'll see you later.