My Wifes AR-15 Setup (Why I Configured It The Way I Did)

Habit
3 followers
8 Video Views·Dec 13, 2024
Excuse the wife typing away in the background, but before we get started, big question. Wife,
do you approve of your AR-15? Out of the other guns that I have,
do you like your gun better than the other two?
She said the other two weapons I have are too heavy and have too much recoil. So,
that's actually what this build is based off of. I do have a video somewhere on my YouTube
of me building this thing from a stripped upper and lower receiver. Keep that in mind,
this was built mainly for being lightweight and having no recoil.
Let's get to it. Like the SPR-LT, we're going to go from the tip,
starting with the B5 Bravo stock. Why did I pick the B5 Bravo stock? This thing is light,
it's really light, really low profile, looks really good, easy to use, and it's also not
that expensive. I would rather have this over a Magpul most of the days of the week.
Before I continue, I will be going over all the external parts before going to the internal parts.
Reason being is, unlike the SPR-LT, I did do some extra thinking when building up this weapon
internally as well as externally. Of course, I want to build the perfect weapon for the wife,
something that she would enjoy shooting and, you know, not hate and throw away,
or want to throw away. One big issue with women getting into shooting is a lot of guys like to
throw a big old 12-gauge shotgun in a 90-pound woman's hands and then expect them to like
shooting after that. Now, what I want to do, I want to give her the best shooting experience
she can possibly have. Of course, before she shot any ARs, I obviously let her shoot mine.
The other ones, they are 2, 2, 3, 5, 5, 6, so regardless if she thinks they have a lot of
recoil or not, they're not that bad. On the end plate, I have the Strike Industries cast
roll nut, the enhanced one. I have no real reason for getting it, it was just in spare parts, so I
was like, all right, might as well use it. Going on to the ease of use parts, we have the Geissele
Maritime bolt catch right here. Very easy to use. Basically, anybody can use it. Super clean.
It's very smooth and really a radiant charging handle on a 16-inch gun. The standard charging
handle, at least, is the perfect charging handle. Good. Another easy-to-use part is the Odenwerks
safety selector. I don't like it. She doesn't like it. I'll probably get another one, but
the reason I got this is because of the extended throw on it. The other side is extremely short,
sadly, but this side of it counts as well. Next easy-to-use part is the ambidextrous magazine
release right here. This is the Troy magazine release, and then on the other side is a
extended standard mag release right here. This is the Knight's Armament standard mag release button
that came from the Knight's Armament ambi mag release. So all the parts I just named,
they're there because it just makes the weapon easier to maneuver and operate. Next off, we have
the Driven Arms Co. grip VFC. I don't know, something like that. It's on the on the website
for like 40-something bucks. The reason I got this is because the bigger grip on it and then
the grip texture on it is actually very, very, very nice. If they had a certain shade of FDE,
I probably would have thrown this on the spear too. The grip I have on my spear is a little thin.
I do still like it a lot, but it is a bit thin. Why did I get a fat grip for such a little woman?
Well, the reason being is it's just easier to hold something not too big but not too small.
That's mainly why I have it. It was kind of a 50-50 if she would like it or not because I
actually never had any trigger time behind this grip, but after getting it, my wife's shooting
it as well, she really does like it. Whether you hold it low or hold it very high, it just works
and again, ease of use. It's something really good to think about when putting a weapon into a new
shooter's hands. Next off is the trigger. This is the Springfield St. Victor's trigger. It has a
mil-spec pull. You should always have a combat or mil-spec rated trigger pull when putting a gun
behind a new shooter. Not only is this a little safer on your end, it also gives them a little
bit more room for failure when it comes to trigger discipline. So my wife already has really, really
good trigger discipline, so that doesn't matter, but it's still good to feel, you know, a little
heavier trigger. This thing is like five to eight pounds. It's not too bad and she doesn't mind it,
so it's pretty good. Let's flip this around. Okay, dope. Let's go on the top of the rail now. So on
the top of the rail, the sighting system's up here. We have the M-Bus Pros, the front and the rear
M-Bus Pro. Yes, I'm aware the front is backwards. I was running a SureFire Lite on here, a SureFire
X600 or N600, but I did take it off for four reasons I'll get to. Why did I get backup iron
sights for this gun in particular? I got them because it's better for a new shooter to learn
iron sights. Yes, for me personally, if I don't need to use iron sights, I will never use them.
I would most likely sign a contract saying, yep, ain't using that stuff again, but yeah, that's my
reasoning for getting iron sights so she can practice more than one skill. Next on here is the
Vortex Spark II AR. Why did I get the Vortex Spark II over, let's say, a Eotech or a more fancy sight?
Considering that this weapon isn't a duty-made weapon, I didn't build this out to break brakes
with. I built this out for lightweight and comfortability. This is a $200 to $250 red dot.
You may be wondering, hey, cheap red dots suck. Well, the Vortex Spark II is pretty dang good,
and yeah, it's made in China, sadly. My friend owns a Spark II in FDE. Works really well after
thousands of rounds, especially on AR-15 where there's not much recoil. I haven't really bumped
it around ever, so I wouldn't know if it keeps zero after hitting it on stuff, but I do know
if you're just going to the range and back, it'll keep zero. I would also pick the Vortex Spark II
over any Holosun red dots anyways, only because Vortex has been in the industry a bit longer,
and I think they know what they're doing a little better. So what do we have in the front?
I have an MFT handguard on here. The reason I got an MFT handguard is because these things are so
light, and they're so slim and sleek, and they also look so cool. I mean, for the price, I think
these are like $200. These things are awesome. The mounting system is awesome. Just how they look
is great. It just looks a lot better than those cheap handguards that most cheap weapon manufacturers
throw out there. This one looks like it has a bit more work into it. I put some rail covers on here
because, you know, women have fragile hands, and they obviously don't want to burn them. So that's
why there's rail covers on both sides of the weapon. I also put one of my favorite grips on
here, the BCM Gunfighter. Of course, I have it angled forward, so it's a little bit easier to
just clamp and pull into your arm, or even pushing out with a angled grip forward helps a bit more,
believe it or not. Now moving on to one of the most important parts of this build. We're going
to be getting to the muzzle device. You usually never see me running a muzzle brake on any of
my guns. Absolutely any of my guns will not have a muzzle brake on them. The reason I have a muzzle
brake on this is because recoil control. Yes, concussion does suck with this, but it's not
too bad. It's not a three-port muzzle brake, so it's not horrifyingly bad, but it's still a muzzle
brake. This is a hybrid between a muzzle brake and a compensator. I don't know if these are for
flash hiding or for muzzle rise compensation. Same with the little dots on the bottom. I'm not even
sure if I put this on right. I probably did, but yeah. This muzzle brake was kind of a hit or miss.
I didn't know if it was going to be good. I'll throw it up here. Forgot the name of it. My wife
doesn't have that many rounds in an AR-15, but she makes this thing look like it has no recoil.
Assuming it's because of how I built the interior out,
including this really nice little muzzle brake up here that's not too expensive. Honestly,
I thought I was going to talk about it a little longer. The reason I got a Geissele barrel is
because they last forever. I don't ever want to change the barrel again, so I got the Geissele.
The reason I got a heavier buffer and a carbine length spring is because that combo just helps
with the recoil a lot. The heavier the buffer weight, the easier the recoil is for you. This
weapon is super light, very easy to use, very easy to manipulate. All right, bang bang,
bang bang. Super easy stuff. Because this is such a simple weapon, it is going to be a
lot shorter of a video. I apologize for that. Anyways, this is my wife's AR-15.
You guys let me know if you guys agree with how I built it. Let me know how you guys would set up
your girlfriends or wives, maybe if you're a woman, how you set up your boyfriend or husband's
weapon. Let me know if you guys agree with this. Let me know how you would set up theirs
respectively. And yeah, that's all I have. Thank you for watching.
