Casting an Axe Worthy of Thor Using Primitive Technology

Traditional Metal Crafting
21 followers
In our last video we worked our way further into the bronze age by building a natural draft kiln.
Now with the capacity of heating and casting larger bronze items, it's time to start making
some of the base tools I'll be needing for future projects. For my designs I'll be looking for
historical bases from across the bronze age era to replicate for my own. Bronze is a different metal
with different properties and limitations, so attempting to replicate modern iron designs
would be a recipe for disaster. My hope is that I can get a quality set of tools that'll last me
through the bronze age until we start getting into the iron age. So I'm going to be aiming for
some more high-end examples of tools I can find, so I can hopefully have some of humanity's best
tools at my disposal for some success in this era. Of all the tools, most crucial will be some
durable axes and a large blade for felling and hewing trees into lumber. I've already cast one
axe earlier, but with a poor choice of a dried clay casting medium, it was pretty brittle and had
already broken several times. So my primary goal in this video is going to be casting one of the
largest axe heads ever found from the bronze age. A recently discovered large nordic blade
that's twice the size of most other blades in this era, perhaps one worthy of Thor himself.
It's believed these original axes were buried as a ritual sacrifice to the Norse gods, so that
might not be too far of a stretch. We'll see if this one can summon the Bifrost. I'll also be
experimenting with a method frequently used in the early bronze age of using a carved stone mold.
But first, to learn a little more about a few historical axes and get some help casting a few,
this summer I got a little help, once again, from Greg, the sword casting guy.
I'm back with Greg, the sword caster, and previously we made a few different swords,
but now we're going to make some axes. So you want to tell me about these different axes you have?
This axe is an axe from England. This is from the late bronze age, about 1000 BC.
This is called a palstave axe. You can tell that this is a very refined piece,
very symmetrical. This was made in a two-part stone mold, so they would have carved soapstone
very carefully and precisely, and they would have preheated those stones and then kind of
held them together like that, and then pouring the bronze down this way into the mold like that.
And the way this was attached to a handle, they would look for kind of an L-shaped piece of wood,
they would split the top piece and like pat on either side here, and then wrap
rawhide around there to attach it. And the very earliest ones of these didn't have a little loop
like this down here. You can imagine a problem with this if you're like jamming this into
something, whether it's a chest plate or a chunk of wood or whatever, it could get stuck in it
because an axe is a wedge, so you lose your axe head. So you tie a piece of leather to this and
then tie it to your handle. That doesn't totally solve the problem, like you could still imagine
it like slipping out and still kind of hanging there. But if you survived battle that day,
maybe you could fix it and go battle the next day with it. Started out being used as a weapon
because bronze was mostly a military thing for a long time, but very handy as a tool certainly.
This one is a duckbill axe. This is from Mesopotamia. This is about 2000 BC. A lot of
these were found around the ancient city of Ur in a cemetery. They were buried with warriors,
so we know that they thought it was a very powerful weapon if they wanted to be buried with
it and go into the afterlife with it. An axe is used as a countermeasure to helmets or to armor.
This would have been attached to a handle like this. Big step forward, they don't lose their axe
heads anymore. Once you can put a handle through it and attach it with a pin at the top, you're
not going to lose it. It also doesn't have to be razor sharp because it's a fairly blunt object
striped, so this would be like for a good whack like that. When you think bronze age, think small.
Bronze was very scarce. They were very economical with their bronze, and so they would have made
things just as small as they could have to make it functional. Pretty interesting weapon. We can
definitely cast some of these if you like. The bronze age, they used a lot of different varieties
of techniques. In the beginning of the bronze age, they were using clay. By the late bronze age,
they're using stone, and they were even sometimes using bronze. You can make a pretty thick bronze
mold if you have enough bronze laying around, and when you pour that smaller quantity of bronze
into it, it doesn't weld together because the other bronze is so much cooler. It just draws
the heat out, and so they'll pop apart from each other. But stone is more common for sure.
Stone has the advantage that you only need to make the mold once. Right. So you can mass produce
weapons. So stone molds are good for a certain amount of time, and then they break. You know, they like
lose some detail, and you might use them for a while and then decide to make another one. And to
cast this, I made a little wax copy of the duckbill axe. I scrape it off, put it back on, flip this up,
and there it is. So now we're just going to clean this up. It's thought that they probably
lost wax casting these. More powder. In the bronze age, they poured vertically, so that's what we're
going to do too. All right, that one's ready. Yeah, we're getting some great colors. I think you could
just sell it as art. Yeah. Yeah, that's nice. That's good work. This is our most technically complicated
casting of the night. Now, I hope some viewer is able to tell us what all these colors mean, like
why that happens so consistently, because I don't know, and I sure would like to. You might have a
little bit of this, but not to this extent. Look at those eyes. They're perfect. Like that is just great.
Tonight, we have just revealed to the world how to cast a duckbill axe. Greg is a sword casting teacher
who travels the country teaching group classes for casting your own swords or axes. And if you
Now, to half the heads. Leather would be the preferred binding for these, but I'm currently
planning on sourcing leather very shortly in the future, so I'll stick with the hem twine for now.
Next up is work hardening the edges, so they'll stay sharp longer. Greg explained this previously
when we made a sword together with a minor incorrect detail. Shoving the atoms a little
closer together makes it significantly harder. I heard that edge hardening is putting the atoms
closer together. Is that actually true? Damn you! No, it's not true. No, no. So what's happening
with that? I've learned from all your people who watched your earlier post, you're causing
little defects in the crystal structure, and so those defects amount to being harder, because
you're kind of limiting some of the ways that I can bend. Then, just sharpen and polish them.
With the help of Greg, I have a few more axes to add to my tool chest. The next challenge for making
my own is that I haven't quite achieved the technology yet to employ Greg's more modern
sand casting method. Form-fitting pairs of casting flasks like his will require some milled and
jointed wood. The tools to make those are what we're aiming to make in this video, so for mine
I'll be exploring a few more historical methods of casting with carved stone for the giant axe head.
Now to do some casting. I think it's done. Oh wow, stone inside of it. Alright, so we got these
bubbles in it. Not great. I'm not sure why that happened. Must have been some sort of gas coming
out of the stone I guess, but we were heating it like all day, so it's nice and hot. Shouldn't have
been any water, so I'm not sure what caused it. It's similar to the first axe I cast in clay,
where it's very bubbly and causes bubbles. That one kind of just broke apart. Unfortunately,
this mold is completely shattered. Only got two pours out of it, so I don't know if sandstone
just isn't an ideal medium. I haven't been able to find any good soapstone in this area, but I
think I'll see if this works. See if we can salvage it still. Putting holes in axe heads was something
that was done to save bronze. They're a little close to the edge. Maybe make it work, because
that was a lot of time for a mold that did not work very well. One downside with using twine is
it tends to loosen with use, but I found that by coating it with the pine resin beeswax charcoal
glue, it helps hold it all tight. Okay, goodbye bill. First of all, thanks to Greg, we were able to
cast these really nice. Got the duck bill and the palisade axe here. Took these out and found out
they are pretty effective. Really nice chopping tools, better than the broken one I made. This guy,
also really nice. We actually took them out, cut down a Christmas tree. It's that time of the year.
Did a really good job. It just cut really deep and really well. The voids here, not really an issue.
Actually turned out pretty good. It did break, but not where you expected. In the back. It was just
on the backswing. It hit the ground and bent and broke this part. If you look inside, there's
clearly was some sort of air pocket that got trapped. Made it a little bit weaker. There's
some obvious flaws with the stone mold that I haven't really figured out. There's also a lot of
work and that was just one side of a mold. Usually they would do two that fit together. So I think
I'm going to move on to the method that was used later. We'll use more of the cob mixture that we
tried out before with a dagger. So I think we're going to do that for some other tools in the
future and see how well that turns out. We use this to cut down a Christmas tree. It's actually
looked up and the axe this is based off of, they found it because the farmer was going to start a
Christmas tree farm. Did a little search of the area and make sure there weren't any historical
artifacts that might get destroyed and that's how they ended up discovering this axe. It's kind of
gone full circle that we base this off of that axe and use it to cut down a Christmas tree at a
Christmas tree farm. So in the next video, you'll see this axe put to the test against a Christmas
tree we cut down. Only it's not a Christmas tree because we are still about 4,000 years before the
birth of Christ. So we are going to be looking into bronze age traditions and what was done for
the winter solstice and do our own version of that. Making all of these took about 11 hours.
A little bit of assist with Greg using his more advanced method. Not something I'm able to do
quite yet because I haven't been able to mill my own wood and get it all joined together to form
the boxes. So that'll be an ongoing challenge but now I have a nice broad axe, milling wood should be
a lot easier. So overall it took 11 hours or about $88 at minimum wage. Not a bad deal for three axes.
I'd like you to get into all of our supporters on Patreon. Without you this wouldn't be possible.
And if you like our content and want to see more, be sure to support us. Any amount really helps.
If you enjoyed this video, be sure to subscribe and check out other content we have covering a
wide variety of topics. Also if you've enjoyed these series, consider supporting us on Patreon.
We are largely a fan-funded channel and depend on the support of our viewers
in order to keep our series going. Thanks for watching!
