Meet The Japanese Knife Master Crafting Kurouchi Blades With Time-honored Techniques.

Traditional Metal Crafting
21 followers
For example, there is a place in the Kofun period,
more than 1,500 years ago, where iron was produced.
The place where the name Hino comes from is the place where iron was produced.
Hino-san is right next to it,
and there is a place called Hirabuki at the foot of it.
Hirabuki is a very large area in Fuigo.
There is a lot of blood left in the iron.
This is the inspiration.
This is the way of making Japanese blades.
We make the shape by making it by hand,
and we shoot it out one by one.
We use the one with iron and steel attached.
This is the key.
And we finish it with an old-fashioned can.
The temperature control is also done with the feeling of what I have done,
including all the heat treatment.
It's hard to convey to the appearance,
but I make it as a part of the inside, as a part of the root.
Recently, there are cases where you use a press or something big,
and there are other tools,
but we don't use them.
Instead, we take the shape with only the feeling of my hand and the information of my eyes.
I feel like I'm taking a shape.
It's a way of making my body like a tool.
If you decide on a mold, you can do it, but you can't do anything else.
On the contrary, I think it's easier for us to change the shape of what we imagined in our heads.
It's a rusty material, so it's a little difficult to handle.
I think it's a little difficult to cut.
Compared to the knives that were mainly used,
the rate of cutting is higher, and I think it's a little difficult to cut.
I think it would be nice if you could use it while thinking about controlling each one and using it.
