This video documents the sword-making process by Mori Sukemitsu, the most prolific swordsmith in Japan today. It reveals the entire process of forging a Japanese sword using the rarest steel, tamahagane—a method that has rarely been shown in full detail.
Enjoyed the video? Share it with friends who love katana!
What’s in this video? ・Forging with rare tamahagane steel ・12 rounds of folding forging ・Yaki-ire (quenching), the most critical step ・Polishing, sharpening, and cutting tests ・The reality of modern swordsmithing, including tools rarely shown in other videos This is not a staged demonstration—this is the real process.
Check out Mori Sukemitsu's YouTube channel here!!: / @長舩すけみつ
In the making of a Japanese sword, a rare type of steel known as Tama-hagane is used.
According to modern Japanese law, only certified swordsmiths are allowed to create Japanese swords
and only as works of art. Furthermore, these swords must be made from Tama-hagane.
For swordsmiths, the charcoal used in the forging process is an essential material.
The amount needed varies from smith to smith, but it generally takes 10 to 15 belts of charcoal
to forge a single sword. In recent years, the cost of charcoal has risen significantly,
and for just one sword, the charcoal expenses alone can reach approximately 100,000 yen.
But why do swordsmiths still insist on using charcoal? The reason lies in the nature of
Tama-hagane itself. This steel contains areas with high and low carbon content, meaning that
certain parts need to absorb carbon to become harder while others require decarburization
to become softer. A charcoal-fired forge creates an environment where carbon naturally
floats in and out, allowing a swordsmith to adjust the carbon content of the steel as needed.
Tama-hagane contains many impurities, and to produce a single sword, approximately 4 kilograms
of this steel is required. However, after the forging process, the final sword weighs only about
1 kilogram. In the Tama-hesshi process, the steel is shaped into block-like forms. However,
consolidating hard Tama-hagane is no easy task. For this process, boric acid is used.
Acting as a flux, boric acid helps bond the steel at lower temperatures. At this stage,
Tama-hagane is still very brittle, making it unsuitable for heating at excessively high
temperatures. When the boric acid melts, it forms a coating on the welding surface of the steel.
Then, when a steel is hammered, the molten boric acid expels impurities, removing the oxide layer
and allowing the steel to bond properly.
The next step is called teko attachment. In this process, a rod-shaped piece of Tama-hagane,
known as the teko, is fused to a block-shaped base piece. Since the tip of the teko becomes
part of the sword's material, it must also be made from Tama-hagane. However, as this process
is repeated, the teko becomes shorter and needs to be extended regularly.
The straw ash and clay have two key roles. They protect the steel from burning by keeping it from
direct contact with air. At the same time, they melt into a glass-like layer, acting as a flux
to aid the forging process. A key aspect of Japanese swordsmithing is forged welding.
Bonding steel at high temperatures without using modern welding techniques. This requires precise
control of temperature and hammering techniques, making it a highly skilled craft. Next, we move
on to folding forging, one of the most defining processes in Japanese sword making. Unlike steel
produced through modern western manufacturing methods, which is uniform in composition and can
be processed by simply extending it, Tama-hagane contains both hard and soft areas with variations
in composition. To correct these inconsistencies, the steel must undergo multiple rounds of folding
of iron sand and iron ore with charcoal, impurities are not completely removed. As a result, it often
and provide excellent sharpness. In contrast, a Japanese sword crafted from Tama-hagane and
unrefined steel undergoes folding forging, revealing distinct patterns in the steel and
the forging of Kawagane outer steel is complete. Now, it will be combined with a pre-prepared piece
round of folding forging, the core steel is arranged on the upper and lower sections of the blade.
This is a technique known as Makuri construction. As a result, the sword adapts a dual core structure
where the Shingane is embedded both internally and externally. Next comes Wakashinobe, a process
in which the steel is heated to a high temperature while being stretched and extended. This technique
is now exclusively used in Japanese sword making. Unlike Tama-hagane, modern industrial steel cannot
withstand such extreme temperatures. It would oxidize from the inside and collapse under the
At this stage, the thickness and width of the blade are gradually tapered. By doing this,
the next process, Hizukuri, final shaping, is focused solely on forging the edge, allowing
steel into its final shape. In Japanese sword making, minimizing the amount of material
removed during polishing is crucial. For this reason, the blade is made as thin as possible
during this stage. While the surface of the blade appears smooth due to melting during heating,
the internal structure does not fully melt, leaving many impurities. This is because Tama-hagane
naturally contains a high level of impurities. If too much material is removed during polishing,
these impurities may become exposed on the surface, affecting the final appearance and
quality. Therefore, shaping the blade as accurately as possible during Hizukuri is essential.
Before quenching, a layer of clay is applied to the blade. This process, known as Tsuchioki,
prevents the sword from breaking during quenching. At the same time, the quenching process creates
the Hamon, an important aesthetic feature of the blade. The clay mixture consists of soot,
finely crushed whetstone, and shigaraki clay. Though the specific ingredients vary depending
on the swordsmith, some swordsmiths even use industrial silica compounds.
The vertical lines applied to the blade serve a functional purpose. They prevent cracks during
quenching. By applying clay to areas prone to cracking, the construction timing during quenching
can be adjusted by fractions of a second, reducing the risk of breakage. This quenching technique is
known as Dengaku-yakire. The blade is placed on a bed of charcoal, then covered with additional
whether or not imperfections appear during polishing is partly a matter of luck.
While there is some acceptable margin for imperfections, sword making requires significant
costs in steel and charcoal. Despite this investment, many swords end up being discarded
due to material-related flaws that appear during polishing.